Download flash tools latest version. How to flash a phone or smartphone using the SP Flash Tool program

How to use the SP program Flash Tool ? SP Flash Tool is a smart and convenient tool designed for flashing devices based on MediaTek chipsets. If you decide to flash an Android smartphone or tablet with such a processor “under the hood,” then you need to first of all take care of the possibility of making a backup ROM of the device if something goes wrong. In addition to the usual reason (precautionary measures), there is another reason here: not every firmware you choose may be suitable specifically for your device. Therefore, you should make sure that the requirements for display characteristics, memory size and other regulated new firmware parameters are fully met. Otherwise, the software, and along with it the device, may be partially or completely inoperative. Practice shows that if the parameters match, flashing an Android smartphone using the SP Flash Tool goes smoothly, but we decided to still provide instructions for creating backup copy.

Creating a full backup of your smartphone's Flash memory

To create a backup copy of the Flash memory of an Android smartphone, you must have the utility installed SP Flash Tool And Driver for Preloader.

1 . Launch the flash drive, then in the " Download"upload the scatter file (if necessary, you can borrow it from an Android device with a similar processor). Don't be alarmed if you don't see any firmware files in the folder with the scatter file - this is normal. Leave the checkbox only on the first line ( PRELOADER), remove the rest.

2 . Determine how much information needs to be read and from where. After that, go to the " Memory Test". Here, too, there is only one check mark left for " RAM Test", the rest must be removed.

2.2 . Connect the turned off Android device to the PC via a USB port;

2.3 . The memory test that will occur after connection will show the information you need on EMMC blocks (don’t pay attention to blocks with zero volume, only those with a size will be needed;

3 . Copy the information received into notepad, then go to the " ReadBack" and click " Add".

3.1 . Double-click on the line that appears;

3.2 . Specify the file name (ROM_0 by default), and also indicate the location where the memory block will be saved;

3.3 . Based on the data obtained earlier, fill in three parameters in the window that appears.

You have the names of your regions, the size is known, and the starting address in each of them will be 0x0.

Example:

After filling in the parameters, just press the button " OK".

Please note: On the device taken as an example, there are 4 regions, but this does not mean that there are as many of them on other gadgets. Flash memory can have 3, 2, or even one region ("USER"). In the latter case, you do not have to select a region - in the menu intended for entering block reading parameters this option will be missing. As a rule, this situation happens when working with Android devices based on early years of chipsets..

3.4 . Click " ReadBack", reconnect to the USB port of the turned off gadget - reading will begin;

3.5 . After reading the block is completed, repeat the manipulations described in step 3 with all other regions.

This way you will get a complete copy of the flash memory of your Android device.

If you decide to use the SP Flash utility, the easiest way is to flash the firmware (modified recovery specifically for your device) and download the corresponding MTK processor of the gadget to your home computer USB driver. All old drivers related to Android devices will need to be removed first. You will also need to download the option Smart Phone Flash Tool for Windows or Linux. And do not forget that the SP Flash Tool utility for MTK devices can be compatible with a 32 or 64-bit version of the PC OS - it is important to choose the correct one that matches the system installed on your home computer.

Hardware will be needed:

• 1. Home Windows computer/Linux;
• 2. A working USB cable for connecting to an Android device;
• 3. Android smartphone or tablet computer.

SP Flash Tool can flash devices based on MT6575, MT6577, MT6577T, MT6595, MT6592, MT6582, MT6572, MT6589, MT6589T chipsets.

Driver installation

Let's assume that you already have a driver archive on your PC - for example MTK_drivers.rar. The first step is to turn off your smartphone or tablet and start " device Manager" from the control panel. Connect your Android device to your computer using a USB cable and wait until " Dispatcher" will update and detect unknown device. Next you need to act very quickly: before the smartphone goes into charging mode, right-click on the unidentified device and in the window that opens, select " Update driver".

Driver installation is done manually. In the next window, select " Install the driver from the specified location", then specify the path to the driver archive (it must first be unpacked) and install the one you need. Now you can disconnect the Android device from the PC, but it’s too early to turn it on. But you can go directly to the firmware process itself.

Instructions for flashing smartphones based on MTK

Here we provide the complete step by step instructions, following which you can independently flash the firmware of an Android smartphone or tablet based on MediaTek processors.

• 1 .Download the SP Flash Tool program and unpack the archive onto your computer;
• 2 .If you have a device with an MT6575 or MT6577 processor based on the AGOLD project, download the SP_MDT program to your computer with the ability to select components in uboot and unpack it;
• 3 .Download and install USB VCOM drivers;
• 4 .Extract the archive with the factory firmware for your Android device (the directory name for the unpacked folder with the factory firmware files should not include Cyrillic characters);
• 5 .Turn off your smartphone or tablet; the USB cable should not be connected to the computer;
• 6 .Remove the battery and then insert it back;
• 7 .If the drivers have not yet been installed, connect the device to the PC using a USB cable. The operating system will then find a new device, and you must point it to the folder with USB driver VCOM for your OS version. Install the drivers and disconnect the cable from the PC.
• 8 .Launch SP Flash Tool;

• 9 .MTXXXX_Android_scatter_emmc.txt(in MTXXXX, replace the letters X with numbers corresponding to the processor of your device - the scatter file is different for each of them).

ATTENTION! For devices based on MT6575 and MT6577 processors, uncheck the Preloader and dsp_bl items; for all other devices with MediaTek chipsets, uncheck only the Preloader item;

• 10 .Click the Download button;

• 11 .Connect the turned off smartphone or tablet to the computer using a USB cable. As soon as the new device is detected, its firmware should begin. If this does not happen, disconnect the device from the PC, remove and reinsert its battery and connect it to the computer again. During the firmware process, provided it is correct installed drivers should be visible in device manager mtk usb port (MediaTek PreLoader USB VCOM Port). If an error occurs, the gadget will no longer be displayed. Once the firmware is completed, it also disappears from the device manager.

Is the firmware completed successfully? All that remains is to disconnect the Android device from the computer and turn it on.

Download Sp Flash Tool you can use the link below for free

SP Flash Tool - reliable program, designed for flashing smartphones and tablets running the operating system Android systems, created on the basis of MTK processors. The utility supports work with all models of Chinese-made devices with MediaTek processors, from the oldest to the newly released new products.

One of the most important advantages of SP Flash Tool is its ease of use. The program does not need to be installed on your computer. Simply unpack the archive into the root directory of your local disk and run executable file. The utility allows you to reflash phones, test external memory (RAM) and flash memory for errors, and format flash memory various types: EMMC, SDMMC, NAND. The functionality of the program allows you to restore the functionality of devices that do not even turn on or immediately freeze upon startup. And support for loading in safe mode "Secure boot"is a fail-safe method for restoring phones infected with viruses. The utility also has the function of creating backup copies of the flash memory of devices that are mandatory must be done before flashing the phone's firmware. Another feature of the SP Flash Tool is that the program comes with drivers for various smartphones and tablets, which are necessary for correctly recognizing the device with which it will work, which saves users from searching on their own.

On top of that, the SP Flash Tool utility is great for preventive flashing of devices, because updating software The phone will increase its performance and solve the problem with many failures. Today, on the Internet on specialized websites, developers post many different modifications of firmware for smartphones and tablets. Which one to choose for your device is up to you!

SP Flash Tool- a smart and convenient tool designed for flashing devices based on MediaTek chipsets. If you decide to flash an Android smartphone or tablet with such a processor “under the hood,” then you need to first of all take care of the possibility of making a backup ROM of the device if something goes wrong. In addition to the usual reason (precautionary measures), there is another reason here: not every firmware you choose may be suitable specifically for your device. Therefore, it is worth making sure that the requirements for display characteristics, memory size and other parameters regulated by the new firmware are fully met. Otherwise, the software, and along with it the device, may be partially or completely inoperative. Practice shows that if the parameters match, flashing an Android smartphone using the SP Flash Tool goes smoothly, but we decided to still provide instructions for creating a backup copy.

Creating a full backup of your smartphone's Flash memory

1. Launch the flash drive, then in the "Download" tab, download the scatter file (if necessary, you can borrow it from an Android device with a similar processor). Don't be alarmed if you don't see any firmware files in the folder with the scatter file - this is normal. Leave the checkbox only on the first line (PRELOADER), uncheck the rest.

2.2. Connect the turned off Android device to the PC via a USB port;

2.3. The memory test that will occur after connection will show the information you need on EMMC blocks (don’t pay attention to blocks with zero volume, only those with a size will be needed;

3.3. Based on the data obtained earlier, fill in three parameters in the window that appears.

Please note : On the device taken as an example, there are 4 regions, but this does not mean that there are as many of them on other gadgets. Flash memory can have 3, 2, or even one region ("USER"). In the latter case, you will not have to select a region - this option will not be available in the menu intended for entering block reading parameters. As a rule, this situation happens when working with Android devices based on chipsets from early years.

3.4. Press the "ReadBack" button, reconnect to the USB port of the turned off gadget - reading will begin;

3.5. After reading the block is completed, repeat the manipulations described in step 3 with all other regions.

This way you will get a complete copy of the flash memory of your Android device.

If you decide to use the SP Flash utility, the easiest way is to flash the firmware (modified recovery specifically for your device) and download it to your home computer that corresponds to the gadget’s MTK processor. All old drivers related to Android devices will be needed delete first. You will also need to download the version for Windows or Linux. And do not forget that the SP Flash Tool utility for MTK devices can be compatible with a 32 or 64-bit version of the PC OS - it is important to choose the correct one that matches the system installed on your home computer.

Hardware you will need:
1. Home computer Windows/Linux;
2. A working USB cable for connecting to an Android device;
3. Android smartphone or tablet computer.

SP Flash Tool can flash devices based on MT6575, MT6577, MT6577T, MT6595, MT6592, MT6582, MT6572, MT6589, MT6589T chipsets.

Driver installation

Instructions for flashing smartphones based on MTK

1. Download the SP Flash Tool program and unpack the archive onto your computer;
2. If you have a device with an MT6575 or MT6577 processor based on the AGOLD project, download the SP_MDT program to your computer with the ability to select components in uboot and unpack it;
3. Download and install USB VCOM drivers;
4. Extract the archive with the factory firmware for your Android device (the directory name for the unpacked folder with the factory firmware files should not include Cyrillic characters);
5. Turn off your smartphone or tablet; the USB cable should not be connected to the computer;
6. Remove the battery and then insert it back;
7. If the drivers have not yet been installed, connect the device to the PC using a USB cable. The operating system will then find a new device, and you must point it to the folder with the USB VCOM driver for your OS version. Install the drivers and disconnect the cable from the PC.
8. Launch SP Flash Tool;

10. Click the Download button;

Smart Phones Flash Tool (SP Flash Tool) is a utility designed for flashing devices built on the MediaTek (MTK) hardware platform and running the Android operating system.

Almost every Android device user is familiar with the word “firmware”. Some heard briefly about this procedure at a service center, others read on the Internet. There are quite a few users who have mastered the art of flashing smartphones and tablets and successfully apply it in practice. It is worth noting that if you have a high-quality and reliable tool - a firmware program - learning to carry out any manipulations with the software of Android devices is not so difficult. One such solution is the SP Flash Tool application.

The hardware-software combination of MediaTek and Android is one of the most common solutions on the market of smartphones, tablet PCs, TV set-top boxes and many other devices, so the SP Flash Tool application is used in most cases when it is necessary to flash MTK devices. In addition, SP Flash Tool is in many situations the only solution when working with MTK devices.

After launching the SP Flash Tool, the application immediately prompts you to proceed to its main function - loading software into the device’s flash memory. Says this right away open tab "Download".

The procedure for flashing an Android device using the SP Flash Tool is carried out almost in automatic mode. From user in general case you need to specify the path to the image files that will be written to each section of the device’s memory. The flash memory of an MTK device is divided into many block sections, and in order to avoid having to manually specify which data should be entered into which memory section, each firmware for the SP Flash Tool contains a scatter file - essentially a description of all sections of the device’s memory in in a form understandable for the firmware program. Just download the scatter file (1) from the folder containing the firmware, and necessary files automatically distributed by the program “in its place” (2).

An important component of the main Flashtool window is the large image of the smartphone on the left side. After loading the scatter file, the message is displayed on the “screen” of this smartphone MTXXXX, where XXXX is the digital coding of the model central processor the device for which the firmware files loaded into the program are intended. In other words, already in the first steps the program gives the user the opportunity to check the applicability of the downloaded firmware for specific device. In most cases, if the processor model displayed by the program does not match the actual platform used in the device being flashed, it is necessary to abandon the firmware. Most likely, the wrong image files were downloaded, and further manipulations will lead to errors in the program and, possibly, damage to the device.

In addition to selecting image files, the user is given the opportunity to select one of the firmware modes in a drop-down list.

• "Download"– this mode assumes the possibility of full or partial flashing of partitions. Used in most cases.
• "Firmware Upgrade". The mode assumes only full firmware sections specified in the scatter file.
• In mode "Format All + Download" initially carried out complete cleaning flash memory of the device from all data - formatting, and after cleaning - full or partial recording of partitions. This mode is used only in case of serious problems with the device or in case of lack of success when flashing the firmware in other modes.

After determining all the parameters, the program is ready to record device partitions. To put the USB flash drive into standby mode for connecting a device for firmware, use the button "Download".

Backing up flash memory partitions

The device firmware function is the main one in the Flashtool program, but it is far from the only one. Manipulating memory partitions leads to the loss of all information contained in them, so to save important user data, as well as “factory” settings or a complete memory backup, you will need a device backup. In SP Flash Tool, the ability to create a backup becomes available after switching to the tab ReadBack. After entering the necessary data - the storage location of the future backup file and specifying the starting and ending addresses of the memory blocks for backup - the procedure is started with the button "Read Back".

Formatting Flash Memory

Since the SP Flash Tool is intended to be a service utility, the developers could not help but add a flash memory formatting function to their solution. This procedure in some “severe” cases is a necessary step before performing other operations on the device. Formatting options are accessed by clicking on the tab "Format".
After selecting automatic - "Auto Format Flash" or manual - "Manual Format Flash" procedure mode, it starts by pressing the button "Start".

Full memory test

An important step in identifying hardware problems with MTK devices is testing flash memory blocks. The flashtool, as a full-fledged working tool for a service engineer, provides the opportunity to carry out such a procedure. The memory testing function with the selection of blocks required for testing is available on the tab "Memory Test".

Help system

The last section in the program not discussed above, available to the SP Flash Tool user when going to the tab "Welcome"- this is a peculiar help system, where information about the main capabilities and operating modes of the utility is presented very superficially.

All information is presented on English, but even knowing him at the level high school, it’s not difficult to understand, and there are also pictures showing actions and their consequences.

Program settings

In conclusion, it is worth noting the SP Flash Tool settings section. The settings window is called up from the menu "Options", containing a single point - "Option...". The list of settings available for change is very scanty and in reality their variations have little effect.

Single window sections "Option", of practical interest are "Connection" And "Download". Using the item "Connection" the hardware interfaces of the computer are configured, through which the device is connected for various operations.

Chapter "Download" allows you to tell the program to check the hash of image files used for transfer to the device in order to check their integrity. This manipulation allows you to avoid some errors during the firmware process.

In general, we can say that the settings section does not allow for serious changes in functionality and in most cases, users leave the “default” values ​​of its items.

Advantages

• The program is available free of charge to all users (many similar service utilities for other hardware platforms are “closed” for ordinary users manufacturer);
• Does not require installation;
• The interface is not overloaded with unnecessary functions;
• Works with a huge range of Android devices;
• Built-in protection against gross user errors.

Flaws

• Lack of Russian language in the interface;
• In the absence of proper preparation of devices for manipulation and incorrect user actions, the utility can damage the software and hardware of the device being flashed, sometimes irreversibly.
Windows 7, 8, 8.1, 10, XP, Vista

FlashTool is a powerful tool designed for flashing smartphones running on the MediaTek chipset. With this application you can install more on your device new version operating system, or completely replace it with a custom one (modified by third-party developers).

However, this whole process is accompanied by a certain risk, and one wrong action can lead to your smartphone turning into a useless “brick”. To prevent this from happening, please read this article carefully. From it you will learn how to flash via FlashTool correctly and not risk your phone needlessly.

Determining the processor model

As mentioned earlier, FlashTool only works with MediaTek-based devices. In view of this feature, it is important to make sure that your smartphone is equipped with a processor from this manufacturer, otherwise the firmware program may not interact with it correctly. This, in turn, is fraught with serious consequences.

To determine the processor model, you will need a special application - CPU-Z. It can be downloaded for free from Play Market, so this process should not cause you any difficulties. After you download and install the program, do the following:

1. Launch CPU-Z on your smartphone.
2. Wait a few minutes while the program collects information about the device.
3. Go to the SOC tab and pay attention to the very top line. This is where your processor model will be displayed.

If the line mentioned above says MediaTek, then your smartphone is suitable for working with the program. But still, before flashing via FlashTool, you need to do a few more important actions. They will be discussed below.

Preparation

It is important to know that flashing your smartphone's firmware will cause it to return to its factory settings. In other words, all information stored on the device will be deleted and cannot be restored. To prevent this from becoming a problem for you, do the following:

• Save all contacts from your phone book. They can be transferred to your computer using special programs or synchronize with your Google account.
• Copy all important photos, documents and videos to your computer.
• Check if there is any content left in the SMS important information(passwords from payment systems, bank codes etc.). If there is one, then it is better to rewrite it.
• Check the calendar for significant dates.
• If you have any left installation files some rare programs, you can copy them to your computer before flashing them through FlashTool.

Don't neglect these simple tips, because they will help you save time and nerves. It is better to go through all the points several times, and only after that proceed with the firmware.

Setting up the operating system

Before flashing Android via FlashTool, you need to set some operating system settings. The fact is that Windows does not perceive smartphone drivers very adequately, so it is necessary to cancel the check digital signatures. This is done like this:

1. Run command line(Administrator).
2. Write the command gpedit.msc for a 32-bit OS or C:\Windows\SysWOW64\gpedit.msc for a 64-bit OS. Press Enter.
3. The “Editor” will open in front of you group policy" Here you need to select “User Configuration”, then “Administrative Templates”, and then “System”.
4. Now click “Install Driver”, and then select “Digital Signature”.
5. In the window that opens, select “Disable”.
6. Click "Ok" and confirm the changes made.

Now operating system will not “swear” at the smartphone driver, and the firmware program will be able to work normally.

Installing smartphone drivers

At this stage, you need to download and install a driver for your device that will allow it to interact normally with the computer. You should look for it in the following places:

• First of all, you need to look for the driver on the website of the manufacturer of your device. This way you can be sure that you won't get a computer virus.
• Sometimes the driver can be found on the disk that comes with some phone models. If so, then you need to insert the CD into your computer drive and follow the prompts.
• If the above two methods do not suit you, you can search for the driver on thematic forums. Keep in mind that this way you risk the security of not only your phone, but also your computer. Therefore, be sure to check all downloaded files for viruses before installing them.

Once you find the driver, you should download and install it. This is done by double-clicking on the archive and should not cause any difficulties. But sometimes problems still arise, so such cases should be given special attention.

Problems installing drivers

It often happens that the driver does not want to be installed in any way. In fact, there is nothing wrong with this, and the problem can be solved quite simply. Namely:

1. Disconnect the data cable from your computer and phone.
2. Turn off your smartphone and remove the battery. You do not need to remove the memory card and SIM card.
3. Open Device Manager on your PC.
4. Place the driver files in any location convenient for you.
5. Without inserting the battery, connect your phone to your computer and get ready.
6. Just for a few seconds, a new device will appear in the manager. You need to have time to right-click on it and select the “Update driver” line.
7. Now just specify the path to the driver files and wait for the installation process to complete.

If you did not manage to update the phone driver in time and the device disappeared from the manager, you need to repeat the entire procedure again, starting from step 5.

Firmware search

Now it's time to find and download the firmware that you will install on your smartphone. Here you have two options: use official software or custom one. In the first case, just go to the website of the phone manufacturer and find latest update for your model. But if you decide to use custom firmware, then you should follow a few simple rules:

• Make sure that the selected firmware is suitable for your smartphone model. Non-compliance this condition is fraught with serious problems, including turning the phone into a “dead” piece of plastic.
• Download files only from reputable sites and forums. In this case, even if some problem arises, you can count on the help of software developers.
• Carefully study the firmware reviews left by other users. It’s better not to take risks if there are many negative ones among them.
• Make sure that the smartphone firmware installed on you is older than the one you are going to download.

Remember, by following these simple rules, you will protect your phone from unnecessary damage.

Creating a Backup

Most users do not experience any problems during the flashing process and the entire process goes smoothly. But it’s still better to prepare in advance for unforeseen situations, because no one is immune from them. To do this, you need to create a backup copy of your smartphone's system files before flashing it via FlashTool. To do this:

1. Connect your phone to your computer.
2. Select the reading speed.
3. Specify the NOR read type.
4. Go to the Read back tab and click Add. Create a backup file, giving it any name. After that, click Save.
5. A window will appear in front of you in which you should specify the size of the data to be read in the Length field. First, try entering the value 0x01000000, and if that doesn’t work, then 0x02000000.
6. Unplug your phone from the cable and turn it off. Take out the battery, insert it back, and then reconnect the smartphone to the data cable (without turning it on).
7. Press and immediately release the power button on your smartphone.

If you did everything correctly, the backup process will begin. Be sure to wait for it to finish.

Device firmware

If you have thought about everything and prepared, then you have no choice but to flash through FlashTool. The instructions for this procedure are actually not that complicated, and they look like this:

1. Launch FalshTool and click Scatter-loading.
2. Specify the path to the file MTxxxx_Android_scatter_emmc.txt (instead of “xxxx” there will be numbers corresponding to the processor model of your device). Click "Open".
3. Be sure to check the DA DL All With Check Sum checkbox. Otherwise, you risk “killing” your smartphone.
4. Click the Firmware-Upgrade button and connect the switched off phone.
5. Multi-colored loading bars will appear at the bottom of the program's main menu.
6. As soon as the firmware process is completed, a green circle will appear on the screen, indicating a successful operation.

Now you can disconnect your smartphone from the data cable and use it. Keep in mind that turning on your phone for the first time sometimes takes quite a long time, so don't worry if you encounter this situation.

By the way, if you don’t know, through FlashTool, then you can use the same instructions. It is equally valid for all Android devices.

Firmware for Chinese phones

How to flash a Chinese phone using FlashTool? This can also be done, but this procedure is somewhat different from the standard one; it will be discussed separately. Here it is important to know the following:

• Never click the Memory Test button in FlashTool. For some reason Chinese phones do not respond adequately to this operation, and it may happen that the firmware is erased beyond recovery.
• Carefully study the information about the firmware on the site from which you download it. It is possible that there are bugs in it that can cause you serious problems.
• Do not try to install firmware from another device on your smartphone. So you risk ruining it, and it’s not a fact that you will be able to return the phone to working condition.

Also, if you are not confident in your abilities, it is better to contact your nearest service center. Chinese smartphones very specific, so let specialists deal with them.

Actions after flashing

After flashing your phone is completed, you need to perform a few more simple steps:

• Don't forget to set the current time and date.
• Link your device to your Google account. This is especially useful if you have synced your phone book with it.
• It will be better if you format the memory card. They can stay on it system files from the previous firmware, which do nothing useful, but only take up free space.

That's basically all. Now you can enjoy the new firmware, which will undoubtedly make your smartphone work in a new way.