Configuring WiFi router D-Link dir300 ("gray" interface). Configuring WiFi router D-Link dir300 ("gray" interface) Connect the router d link dir 300

A D link router, like other similar routers, is used to create a wireless network through which other wi-fi devices connect to the Internet or local network. For this he needs wired connection to the Internet via a modem.

Users with little experience may have some difficulties connecting a wi-fi router to Windows OS. D link, in comparison with other router manufacturers, has more convenient system router configuration settings, thanks to which, even very far from computer technology people will be able to configure it correctly.

In terms of price-quality ratio, d link devices occupy a leading position in the wi-fi router market. In general, this company specializes in the development and production of network equipment, so its leadership in this area is well deserved.

One of the factors that determines users' choice of equipment produced by a given company is a large selection of alternative firmware that significantly increases performance. High-quality support for its products also determines the buyer’s choice in favor of d link wi fi router devices.

Installation and connection

So, you are the happy owner of a d link router.

First, let's unpack the device. In addition to the router itself, the kit should contain a pair of cables for connecting to the Internet and Ethernet connection. How to connect a d link router and configure it?

To connect a d link wi fi router, you need to do the following:

Instructions, power supply, patch cord, CD, router

We connect an Ethernet cable to the DSL modem, its other end is connected via the WAN port to the router itself.
We connect the PC to the router with the second Ethernet cable; for this you can use any Ethernet port of the router.
The basic configuration of the router is configured using the web interface. In the browser, type the following in the address bar: 192.168.0.1
On the page that opens, you will be required to create a username and password for it. It’s easier to use the “Admin” login and leave the password field empty.
We press enter, a window appears in which the configuration of the d link router is configured.

To set up a D-link router and wireless network security system, you need to do the following:

Change the password for accessing the administrative menu. This is done in the “Tools” menu. In it, select the “Admin” tab, in which we enter the password.
Next we need to temporarily disable wireless network.
The next step is to enable wireless network data protection (WEP protocol). This is done in the “Home” – “Wireless” – “OpenSystem” tab. Enable “WEP” and set the security key to “128 Bit”. We set the key type to “ASCII”; in the field for the first key you need to enter a password. In order to increase the level of security, you need to change the SSID. This is located in the same tab. After completing these steps, save the settings.

A considerable number of users are doubtful about the WEP security protocol. In such cases, preference is given to the latest, advanced developments, for example WPA and WPA II. The latter will provide maximum protection for your wireless network. You can configure WPA II as follows. Open the “Wireless Security Mode” tab and click on enable the corresponding function.

You will need to define an encryption algorithm. This is done in the “WPA Personal” window. The “AES” algorithm is considered the most progressive, for this reason it is better to choose it. After this, the type is selected. For home use the most acceptable type would be PSK, which requires entering a password on all connected devices. The EAP type is used by corporate users and is better protected. Essentially, it is a combination of different methods.

Filtration MAC address ov is configured like this:

1. Go to the configuration settings window, then go to the advanced settings tab, where we select “Filters”

2. Select a MAC filter, set a list of PC addresses connecting to your wireless network.

Setting up a d link 2540u router

First you need to configure the TCP/IP protocol on your PC. For this, on WINDOWS example XP, open the Start menu - Settings - Control Panel - Network connections.

IP address: 192.168.1.2
Subnet mask: 255.255.255.0
Default Gateway: 192.168.1.1
Preferred DNS Server: 195.34.31.50
Alternate DNS server: 62.112.106.130

Save and exit.

After making sure that the device is correctly connected to the PC, open the browser and enter into the address bar: 192.168.1.1. A page will appear on which you will need to enter your username and password. After these data have been entered, click OK.

We hope that the material presented in this article will help you install the d link router and configure it correctly.

This line of routers has become widespread among users and there are several reasons for this:

Well-known manufacturer, which has been specializing in network equipment for many years, as a result of which the products have high quality, good performance, and also very unpretentious to use.
Small price, which is an important factor, especially for simple user, who plans to install a router at home, configure it, and happily forget about it until he needs something with faster speeds.
good software , which will allow you to easily connect to almost any Internet provider. New firmwares are also regularly released that fix bugs and optimize operation.

Model differences

New models of this line are released quite often, and therefore their hardware differs. At the same time, routers released several years ago and the newest ones may not have any external differences. They differ only in the revision indicated on the sticker on the back in the line H/W ver. B4 (for the fourth revision).

DIR-300NRU B1, B2, B3- old models that have not been produced for some time, but it is easy to find any instructions for them and descriptions of solutions to emerging problems.
DIR-300NRU B5, B6-newer routers that are found in stores.
DIR-300NRU B7-one of the latest models, can be distinguished from the previous ones, including by appearance.
DIR-300 A/C1- The latest model at the time of writing, often found in stores, but has some bugs.

Before you start setting up

Further paragraphs of the instructions make sense only if the device is connected to a PC or laptop using a twisted pair cable. The setup can be done without this, so if the user does not consider it necessary to carry out these actions or does not have such an opportunity, then they can be skipped.

Uploading new firmware

The first thing to do is download new firmware to your computer. To do this, you need to go to the official website of the manufacturer, and then follow the path indicated in the picture. You need to select your device and the correct revision.

There will be only one file that you need to download to your PC.

Checking network settings

Here you need to do the following (for Windows 7 and 8, for XP everything happens in “Network Connections”) go to “ Control Panel» - « Network Control Center and shared access » - « Changing adapter settings" Then right-click on “Local Area Connection” and select “Properties”. Next, you should go to the properties of Internet Protocol version 4 TCP/IPv4 and make sure that the address and settings are obtained automatically. If this is not the case, the specified values should be recorded.

Connecting a router

Everything is quite simple here. To the Internet port (WAN), you should connect the cable from the provider, and one of the free ones is the one that will go to the computer.

Connect as shown in the figure. On the PC itself, the global network should be completely disabled if you log in through any additional programs, which may be provided by the service provider. Don’t forget to connect the device itself to power.

Firmware D-Link DIR-300

After establishing the connection, you should go to the browser and enter 192.168.0.1 and a couple of login and password admin/admin. If they do not fit, then you can reset the router by holding the reset key on the back of the device.

After this, the user will be transferred to the main menu.

To update the firmware, you need to go to " system", which will be located in the settings section, and then select " Update software" After that all that remains is to indicate the path to the downloaded file and click “ Update" The process may take a long time, but do not restart the device.

Setting up an Internet connection

The router will connect to the global network, and other devices will connect to it to gain access. Therefore, you first need to find out how the connection is made. For this you need go to the provider's website and find out there.

Next you should click Advanced settings– Network – WAN. Here you need to click " Add", after which the following menu will be displayed, where you will need to enter the connection data provided on the website of the Internet service provider. Usually this login/password, in some cases added vpn address server, for the option with a static IP this will be the address, gateway and DNS server.

The remaining fields can be left standard. After this you need save changes and go to next page. A menu will open showing the new connection; you should save here too. After which you need to update the connection. If everything was configured correctly, a notification will be issued that the connection has been established. After this stage, the connection will be available via twisted pair.

Setting up wi-fi

Now the wireless network will be available; to connect, select it on the device and enter the password.

The connection process for the DIR-300 model is not fundamentally different from other home modems from this company. We will tell you in detail how to set up a D-Link DIR 300 router, and we will provide step-by-step instructions. To configure a D-Link router, you will definitely need to enter the graphical interface, which will also be discussed in this material.

Connecting the router to the network and to a PC/laptop

After purchasing a router, you need to figure out how to connect it. There is nothing difficult in this procedure, as you will see for yourself. Prepare before you start network cable required length. Next, follow these steps:

The power and corresponding LAN connector indicators on the front panel should light up. Congratulations! The first stage is completed. Then you can move on to the software part.

How to reset all settings

During operation, the router may not work correctly: the Internet will disappear or some parameters will be lost. In most cases, such software errors are corrected by resetting to factory settings. This can be done in two ways: through the web interface (section “System” -> “Configuration”) or hardware. There is a button on the back panel labeled Reset. To reset settings, press and hold it for more than 10 seconds. A successful reset will be indicated by the simultaneous lighting of all lights on the front panel.

Attention! To press, you will need a paper clip or toothpick. Afterwards, the user will have to re-configure the DIR 300 router.

Firmware update

If setting the factory settings did not give a positive result, the next step to restore the router to full functionality is to update the firmware. The device comes with the original version from the factory. On the official website of the TP Link company (via search) you can find latest version firmware and download. The file has bin permission and is located on the website in the Firmware directory. Next, follow the steps of the following instructions:

The process will take a few minutes. After completion, an automatic reboot will occur. New firmware, as a rule, is more efficient because it eliminates microcode flaws. Roll back to previous version You can use the same method by downloading the necessary software from the website and installing it through this menu.

Login to the web interface

In order for the D-Link router to distribute the Internet to PCs and other devices, it is necessary to make adjustments. The first step is to log into the modem interface. Before you begin, you need to know your username and password to log in. You can find information on the device label. The IP address to which the transition should be made is also indicated. If the inscription is damaged, then try using standard admin for both input fields.

Once you have the required data, run:

Only after this you will be able to change device settings.

Network connection properties

Setting a new password for logging into the web interface

We definitely recommend replacing the standard factory key with a more reliable one. Third-party “pests” can enter the device menu (if Wi-Fi is not protected) to change the name or completely deny your access. The change takes place in a couple of minutes:

Be sure to write it down new key additionally in a notebook or diary so as not to forget.

Setting up a wired connection

To use the Internet, you must configure the D-Link DIR 300 connection. Log into the interface using the router’s IP address. Check with your provider for your connection type and login information. They are usually specified in the contract, a copy of which the subscriber receives when connecting to the Internet. All actions take place only in the “Network” section:

Please note that when connecting, the system will ask for a password and login. You must enter the data provided by the service provider. The network you set up should work without problems, so try accessing any Internet resources.

Wi-Fi connection

As you noticed, the modem has a small antenna. Through it, the Internet is “distributed” over the air, since the DIR-300 is a Wi-Fi router. Creation wireless point access occurs in the “Wi-Fi” section:

This completes the Wi-Fi setup. Save the changes, and then try to connect to Wi-Fi.

Connecting to a router via Wi-Fi

On your laptop/smartphone or tablet, activate Wi-Fi. In the search for available Wi-Fi, find your SSID name. You must be within signal coverage. Click on the access point and then enter the password you set before. If the procedure is successful, the word “Connected” should appear next to the name of the point.

The next time, the connection to the D-Link DIR 300 router via Wi-Fi will be performed automatically without the need to re-enter the data.

Other settings

For advanced users, the router can provide more advanced settings. They will help you activate VLAN, client mode and much more. Let's talk about how to configure specific functions in DIR 300 in detail.

Setting up routing

In the “Advanced” menu section and the “Routing” subsection, the user can add static routes to the system to networks that are connected directly to the device.

To define a new route, click “Add”. In the line, set the following parameters:

the destination network to which you plan to create a route;
destination network mask;
IP gateway, i.e. the address through which access occurs;
metric that determines priority;
field “via interface” (in the drop-down list, select the connection to access).

After the task, click the “Apply” button. This is how the routing table is configured in D-Link.

VLAN

Using VLAN, the user of the D-Link router can create and change groups of ports for virtual networks. First erase entries from the group on the page before creating a group with LAN ports:

Select the desired group.
Remove the flag located on the left side of the port. Click "Save".

Creation new group VLAN is performed through the “Add” button. All that remains is to fill out the fields.

Hello, our dear visitors. Do you want to know how to configure the dir 300 router correctly? On this page, website I decided to tell you what it is setting up D-link DIR 300.

The model of this router is very popular in Russia and neighboring countries, so step by step setting up DIR-300 will definitely help many people set up home network. How to configure dir 300? We will assume that step-by-step correct setting D-link Dir 300 has begun! We are sure you can handle it on your own!

In fact, there is nothing complicated in setting up the dir 300 nru router. But most Dlink DIR300 owners are faced not with the problem of the setup itself, but with a lack of understanding of simple things:

How to connect D-link DIR 300.
What data to enter into the router.
What connection does the provider use?
How to connect WiFi after setting up a local network.

So, D-link DIR 300 is unpacked. Its kit usually includes instructions for setting up and connecting, but since you are on this page, it’s probably not that clear ;). Also included with this WiFi router Comes with power supply and patch cord. Let’s say right away that we will show the setup of D-Link dir 300 nru, but since there are several revisions of routers of the 300NRU model:

The DIR 300 NRU B7 we are reviewing.
DIR 300 NRU B6 – the previous revision of the router, differs in the admin panel interface.
DIR 300 NRU B5 is a very old model.

Don't be afraid that you have a different router interface. All settings for NRU are also relevant for other revisions. The main thing is to understand the principle.

By the way, we have already talked about the principle, and we also have an earlier one. Let's return to the D-Link Dir-300 and see what the router has on the back:

As can be seen from the figure, the router has four LAN RJ45 connector, which are needed to connect computers via a network cable, that is, PCs not equipped with a WiFi module. Also, the D-Link DIR 300 has WAN The connector is responsible for receiving an Internet channel from the provider. The round power connector is designed to connect the router using a power supply. This can already be done if you haven’t connected it yet ;).

After that, connect the patch cord (network cable that comes with the router). One end needs to be plugged into one of the four ports LAN, and the other into the network card of a computer and laptop. To the port WAN We insert the wire from the provider (do this later, the Internet will come in handy later).

As can be seen from the photograph, D-Link connection dir 300 is quite simple. Initial setup router dir 300 is finished. By the way, if for some reason you do not have a patch cord included, then you need to buy it or. Now it's time to go into the D-Link DIR 300 and configure it. Open the browser and enter the local address, as written in the instructions 192.168.0.1. Admin panels of all routers D-Link available at this address.

We enter the username and password that are set on the router by default. By the way, if for some reason you forget your password, we will change it below at the next D-Link setup dir 300, then restore your login and password by resetting settings dir 300. This can be done using the “Reset” button, which is located on the back of the router. Just keep in mind that all settings on the router will also be reset. Let's return to setting up the DIR300. A warning window will appear that it would be a good idea to change the password, we will do this later.

Finally we got to the router admin panel D-LINK DIR 300!

Updating the firmware before setting up the router

Any modern router has firmware. Router manufacturers are trying to correct errors in the operation of routers, so it is worth updating the firmware of our Dlink DIR-300. To do this, let's check the firmware version at home page administration panels.

Now we need to pick it up new version firmware on the Dlink website. Follow the link ftp://dlink.ru/pub/Router/, find our router model and download the firmware with the file extension FWZ.

The firmware is updated in the admin panel. The update takes a little time. Let's continue.

Preparing to configure on Windows

One of important points In setting up the dir 300 router, and not only this model, is setting up a local network and connecting to the Internet. Moreover, connecting to a local network is easy, but difficulties may arise with the provider’s settings. In Russia, there are at least two large providers:

Beeline.
Rostelecom.

And there are countless less visible ones, most of whom are simply intermediaries, renting a channel from a large provider. And their connection settings may differ. There are several types of connection to the provider:

PPPoE connection.
PPTP connection.
L2TP connection.
IPoE connection.
Connection via static IP address.
Automatically obtain an IP address.

We are sure that many of you were wary - there are so many incomprehensible abbreviations. In fact, those who do not know what type of provider they are connected to need to do a few simple things.

Go to the provider's website and find the connection settings.
View the settings in the agreement with the provider.
Call your provider's technical support and ask for settings. The method is conditional, they can “send”. In Beeline, when asking such questions, they find out the model of the router, and if it is not on the list of recommended ones, even if the question is substantive, they say “Goodbye.” It’s not good, but the company is big and they don’t care about users ;). And the level of Beeline technical support staff is often low, to say nothing of smaller providers.
Go to the network interface settings and see for yourself. This is what we will do.

We need to look at the settings in Windows XP let's go:

Start -> Control Panel -> Network Connections -> Local Area Connection -> Properties -> Internet Protocol (TCP/IP) -> Properties

IN Windows 7 The settings of the network interface, which is responsible for connecting to the provider, are located:

Start -> Control Panel -> Network and Sharing Center -> Change adapter settings -> find the interface and go to Properties again twice, as in the picture

We remember what data is indicated there, you can even take a screenshot. After recording the IP, mask, gateway and DNS , you can put points on “receive automatically”.

Setting up WAN and LAN interfaces on D-Link Dir-300

Let's move on to setting up a local network and Internet access on our DIR-300. Go to the tab:

Network -> Connections

And we'll choose WAN interface. A window will appear, the parameters of which will need to be configured.

This is where knowledge about the type of connection to the provider comes in handy. As you can see, the screenshot shows the settings for IPoE. Your settings may, of course, vary. For example, to change the settings to PPPoE, you need to at least change the connection type:

Let's briefly go over all the characteristics of this page:

MTU – the value is responsible for maximum size a data packet that is transmitted over a channel via the TCP/IP protocol. Some providers only work with a certain MTU value, but usually it is 1500 and you don’t need to touch it.
MAC: Unique network interface identifier. Some providers bind to the MAC address to protect your Internet connection. You can check this with your provider. If a binding exists, you need to find out the MAC address of your network card and hit him in this field.
Obtaining an IP address automatically also depends on your provider’s settings. If online Windows interface, which we talked about above, were driven in certain values IP, mask and gateway, then you need to uncheck and specify these parameters (remember, we asked you to write them down?)
Obtaining the DNS server address is the same as with the previous point.

Save the changed WAN interface settings.

About LAN one can say simply. If you want network participants to receive an IP address automatically, then on the DIR-300 you need to leave everything by default, and in Windows check the “receive automatically” checkbox, as we described above. Otherwise, you can make a network by disabling DHCP V LAN, that is, so that the router does not give out the IP automatically. In this case, in the properties of the TCP/IP protocol you will have to specify the IP address, mask and gateway. For example like this:

IP 192.168.0.2
Mask 255.255.255.0
Gateway 192.168.0.1

So, Dir-300 will be able to see your computer. Next we will be setting up WiFi on the D-Link DIR-300, which we will issue as a separate article. We hope this article will help you connect a computer or laptop to the Dlink DIR-300 router. Now let's move on to the second part of our story about this router model and.

Hello! In this article we will connect the D-link DIR-615 router. I will show this model as an example, but the instructions are suitable for all D-link routers: DIR-300, DIR-320, etc. Let’s look at the process of connecting the router. Let's connect power, internet, and computer via cable or wireless Wi-Fi network. I will provide links to instructions for entering the router settings and Wi-Fi settings, Internet, etc. Simply put, you can connect and configure a new D-link router yourself.

This is what the D-link DIR-615 router looks like when you just bought it:

You may have a different model, it doesn't matter. The main thing is that we need to connect it all correctly. If you connect it incorrectly, you will hardly be able to configure the router, let alone use it.

We need:

Connect power to the router
If the indicators do not light up, turn on the power using the button on the device
Connect your computer, tablet, phone to the router. Can be done via cable or Wi-Fi
Connect the Internet to the D-link router. Cable from an Internet provider, or from an ADSL modem
Go to the settings of our router and configure it.

Let's look at everything in more detail.

Connecting a D-link router to a computer and provider

First, take the power adapter and connect it to your router. Then, plug it into a power outlet. If the router does not turn on, then turn on the power using the button on the router itself. Next, if you want to connect the router to a computer or laptop via a network cable (it’s best to configure via cable), then take the network cable that comes with the router and connect your laptop or computer with it. We connect one end of the cable to the network connector on the computer, and the second connector to the LAN connector on the router. On D-link routers, LAN connectors are usually black. They are signed LAN. Like this:

You can also connect via Wi-Fi network. Just turn on the router and it will appear new Wi-Fi network to which you can connect. You may find it useful in connecting your laptop to a wireless network.

If you have connected your computer to the router, and you see the connection status on the computer: “Without Internet access”, or “Limited” and the Internet does not work, then this is normal, because we have not even connected the Internet to our D-link and have not configured it yet .

Connecting the Internet to D-link

Most likely, you just have a cable from your provider or an ADSL modem in your house. In the first case, we take a cable from the Internet provider and connect it to the WAN connector of the router. It is on D-link DIR-615 - yellow. If you have Internet via a modem, then we also connect the cable from the modem to the WAN connector on the router.

Most likely, even after connecting the Internet cable, the Internet on the computer (or other device you connected) won't work. This is because you need to configure the router to work with your Internet provider. I wrote about this in the article: .

You need to go to the router settings, here, and configure it. If you have connected everything correctly, but cannot enter the settings, then look at the article. The main thing is that you need to choose the right connection type and set the necessary parameters that your Internet provider uses. Then the Internet through the router will start working. Also, set up a wireless network, and .

It is best to configure the router according to detailed instructions. We have one like this. But, using her example, you can configure other D-link routers. Look, perhaps I have already added detailed articles on other models. See the section Setting up a router - D-link, or ask in the comments.