Setting up Wi-Fi on a Windows 10 laptop. Turning on Wi-Fi. Allow connected devices to use the Internet connection

Windows 10 is the next step in the evolution of operating systems for workers and desktop computers from Microsoft Corporation. Despite the fact that Windows 8 can be considered a failure, its release was still beneficial for developers. Windows 10 has absorbed all the best from all its predecessors and acquired an incredible number of new features and capabilities. Some of their lists also relate to the functioning wireless network, because setting up Wi-Fi in Windows 10 can cause problems for beginners who have purchased a device running on it.

In today’s article, we’ll look at how to set up Wi-Fi in 10, connect to an existing wireless network, and the problems associated with it.

Turn on the radio module

Before using a wireless Wi-Fi connection on a laptop, you need to activate the WiFi module. This is done using a special hardware key or key combination, for example, Fn and F11 (see the manual or look for the corresponding icon on the buttons or keyboard of the laptop).

Connect to an active access point

Here is an algorithm of actions that the user will have to perform in order to connect to the broadcast WiFi point. Naturally, for this you need to know the connection password, if it is set, and enable the use of the radio module on your device under Windows manual 10.

Click on the network icon located in the tray.
Select the appropriate wireless connection and click on it.

Check the “Connect automatically” checkbox if you are using this access point as a permanent connection, and click “Connect”.

If you have a password consisting of 8 or more characters, enter it and save it if necessary.

After checking the data, passing authentication and initialization, the Windows 10 computer will be connected to the specified Wi-Fi point. As you can see, establishing a connection via a wireless network in the “ten” is almost identical to previous versions of the OS.

Additional options wireless connection

Windows 10 is distinguished by a considerable list of Wi-Fi parameters and its capabilities available to the user: viewing connection data, setting security settings, configuring sharing, file sharing, remote access and viewing saved passwords.

Looking at the saved keys

Windows 10 provides the ability to view the password for the network to which your device is connected, for example, to connect to Wi-Fi using a smartphone or to transfer the key to a friend.

It's sad, but you won't be able to view the saved password for an inactive network.

To do this, go to the “Network Control Center...”.
In the “View active networks” frame, find “Wireless...” and click on its icon.

Call up the properties of the active WiFi connection.
In the “Status” window, click on the button indicated in the screenshot.

A window will appear with detailed information about the WiFi connection you are currently using.

Go to the “Security” tab and activate the function of visualizing the characters entered in the security key field.

On the Windows 10 computer from which you configured the Wi-Fi router, you can also view the wireless connection encryption key.

Follow what is indicated in the user manual or on the sticker on the back/bottom cover of the router.

Typically this is 192.168.0.1.

Click on the “Wireless Mode” link.

In the “Protection...” or “Security” tab, move to the connection encryption method and see the key in the “PSK Password” field.

Removing an unnecessary connection

Even with a one-time use of a public network (in a cafe, airport), Windows 10 remembers the parameters of the connection made and stores them. If such a network is not needed in the future, it can be easily deleted - “forgotten”, so that the computer does not connect to it.

Call up the “Networks and Internet” menu item in the system settings.
Go to the first tab “WiFi”.
Click on the “Manage settings...” button below.

Scroll down the list until you see the names of the access points.
Click on the name of the unnecessary wireless network and click “Forget”.

From now on, during the discovery of the forgotten Windows connections 10 will not make automatic connections to it.

Creating a new connection using a TP-Link router

Forming and setting up a new connection in Windows 10 is a simple procedure and it depends, first of all, on the router used, and not on the OS version. In principle, how to configure the router is described in its instructions, but let’s briefly look at the process of creating a new WiFi connection.

We turn on the device to the power supply and connect it to the computer using the included crimped twisted pair cable.
We are waiting for the router to load.
Open an Internet browser window and enter the starting address (look on the sticker on the case or in the user manual) to enter the router interface.
Enter the standard password and login values to gain access to the interface.

Typically this is "admin" for both lines. In any case, take a look at the technical documentation.

Go to the “Quick Setup” tab.

Using the functionality and tips of the wizard, we set the key Wi-Fi parameters.
Be sure to save the settings and reboot the router if the device reboot does not start automatically.

This is an overview of the main features for working with WiFi in Windows environment 10 can be completed.

(Visited 20,704 times, 2 visits today)

For a long time I couldn’t come up with a good title for this article that would make it clear what it was about, and that you could easily find it if you have problems with Wi-Fi in Windows 10. Now we will try to figure out why there is no Wi-Fi button in Windows 10 Where to look for wireless network settings, how to turn on Wi-Fi and why this problem occurs. I'll tell you about the error "Could not be found wireless devices on this PC" in Windows 10.

I’ll say right away that when you can’t find “Wi-Fi” on your laptop (no power button, no item in settings, etc.), then most likely you simply do not have the Wi-Fi driver installed, you do not have a Wi-Fi receiver, or it is turned off. Let's look into everything in detail.

The essence of the problem:

The whole problem is that we cannot connect to a Wi-Fi network on Windows 10. I already wrote. But when we open the connection management window, there is simply no button there Wi-Fi control adapter.

If we go to settings, to network parameters, we also won’t find the item there "Wi-Fi". And on the tab Airplane mode we will see the error highlighted "We couldn't find any wireless devices on this computer" .

This problem could mean that:

Your computer simply does not physically have a Wi-Fi receiver. If you have a laptop, then it should have a built-in wireless adapter. On your computer, you can use an external Wi-Fi receiver. If you are absolutely sure that your computer has Wi-Fi (we used it before installing Windows 10, looked at the specifications, connected an external receiver, etc.), then you need to check other reasons.
The driver for the Wi-Fi adapter is not installed. In some article I already wrote that Windows 10 itself installs the driver for wireless adapters. But not always. And these drivers do not always work as they should. Therefore, the most common reason, with such problems with Wi-Fi in Windows 10, it’s the lack of a driver wireless adapter, or inappropriate driver.
Well, it may be that The wireless network adapter is simply disabled. I just checked, turned it off, the “symptoms” of the problem are exactly the same as I described above.

One small nuance. You probably know that your laptop has a keyboard shortcut to turn wireless networks on and off. On my Asus, for example, these are the keys Fn+F2. In Windows 10, these keys are responsible for turning Airplane mode on and off. If you have an “airplane” icon on your notification panel instead of the Internet icon, then simply disable this mode using the keys on your laptop, or by clicking on the icon itself and turning off “Airplane” mode.

In any case, you can check the keyboard shortcut on your laptop, maybe it will help. For different manufacturers, these combinations may be different. Typically, this is the Fn key + the antenna icon key.

Let's check and fix it.

No Wi-Fi on a Windows 10 laptop: problem solving

Let's first check whether the Wireless Network adapter is turned on, and if you don't have this adapter at all, then let's make sure that the problem is in the driver, or in the absence of this adapter in your computer at all.

Right-click on the Internet connection icon in the notification bar and open Network Control Center and shared access . In the new window, select Changing adapter settings.

If you see an adapter there "Wireless Network" (or something like that), and it is disabled, then right-click on it and select Turn on. After this, Wi-Fi should appear on your laptop and you can connect to the wireless network.

If there is no “Wireless Network” adapter at all, then, as I wrote above, your computer most likely does not have a Wi-Fi driver installed. Or it is installed, but does not work stably.

Problems with the Wi-Fi adapter driver in Windows 10

We need to go to the device manager and see what's there. Is there a wireless adapter and how does it work? To do this, click on the menu Start and select .

At the bottom of the page go to device Manager.

In Device Manager, open the tab Network adapters. Usually there are two adapters: LAN - for connecting the Internet via network cable(network card), and wireless adapter. As a rule, the name of the wireless adapter contains the word "Wireless". This is what the Wi-Fi adapter looks like in Device Manager on my laptop:

As you can see, the name indicates the manufacturer and model. If you have the adapter in device manager and it is enabled (I showed how to check above), but you still can’t turn on Wi-Fi, then try updating the driver for your adapter. Or, try performing the operations with the adapter that I wrote about in the article.

If there is no driver, or the adapter itself is missing, then you won’t see it in the device manager either.

But, please note that if there is no adapter in the manager (and in a computer, laptop it is), then in the device manager there should be at least one "Unknown device" , as in my screenshot. In this case, you need to try installing the driver for the Wireless adapter.

How to install or update the Wi-Fi adapter driver?

If you have a laptop, then go to the official website of the manufacturer, through the search, or through the menu, look for your model, there find the section with driver downloads, and look for the driver for Wireless adapter. Please note that there will most likely be an option to select your operating system. Select Windows 10. If there is no driver for Windows 10, you can try selecting Windows 8 (8.1). Also, the driver may be on a disk, which usually comes with the laptop. (but it’s unlikely there will be a driver for “ten”).

Save the driver to your computer and simply start installing it. If you downloaded the archive, then the archive should contain installation file, which you just need to run and follow the instructions. After installation, restart your laptop and try connecting to the Wi-Fi network (Wi-Fi must be turned on).

If you have desktop computer with USB/PCI adapter, then look for the driver on the website of the adapter manufacturer itself. According to the adapter model. Well, you should have a driver disk.

As for updating the driver, we do everything the same as in the case of installation: find it, download it to your computer, and install it.

And one more thing...

By the way, after installing the driver on the wireless adapter, when it works, you can - a very useful thing.

Share your results in the comments, ask questions, and I will try to supplement this article new information, to solve this problem with Wi-Fi on the “ten”.

On drive C I turned on the search and found the wireless LAN folder

C:\eSupport\eDriver\Software\WirelessLan\Qualcomm Atheros\WirelessLan\10.0.0.342\2886\

There are two files there: Setup. I started both of them and everything returned to normal.

If it helps anyone, thanks to Konstantin!

Update: WLAN Service

Check if the WLAN AutoConfig service is running on your computer. I showed how to do this.

Update: Windows Event Log Service

A working solution appeared in the comments, which is that you need to enable the "Journal" service Windows events". Let's go to the services (you can press Win+R and run the command services.msc).

Find the Windows Event Log service and open its properties (by right-clicking on it). We check whether the startup type is set to “Automatic” and whether the service itself is running. If not, click on the “Run” button. You can try stopping it and starting it again.

Share your solutions in the comments! Ask questions.

Development mobile internet It has reached such a level that many users stop connecting their home network using USB modems. However, their disadvantage is obvious - the inability to connect to a standard router for Internet distribution. Few people know, but almost any computer or laptop that has a Wi-Fi adapter can act as a kind of router. In this article, we will look at how to distribute Wi-Fi from a laptop on Windows 10, but this method is also suitable for a desktop computer.

How to determine whether a laptop or computer can distribute Wi-Fi

It was noted above that the method of distributing the Internet through a laptop is most often used in situations where a USB modem is connected to the computer. At the same time, it also works when distributing regular wired internet. In some cases (depending on the settings of the router and the Wi-Fi adapter in the laptop), a Windows 10 computer can act as a router, expanding the coverage area Wi-Fi networks, that is, by distributing the wireless Internet to which it is connected.

To determine whether a laptop or computer running Windows 10 can distribute the Internet via Wi-Fi, you need to conduct a test. To do this, run and write the command in it:

Netsh wlan show drivers

After that in command line Information about the Wi-Fi adapter that works on your computer or laptop will appear. In this information, you need to find the line “Support for a hosted network” and look at the displayed result. If it says “Yes”, it means of this computer you can distribute Wi-Fi, but if it says “No”, then this option is not provided.

Attention: In some cases, when the command line indicates that it is impossible to distribute the Internet from a laptop via Wi-Fi, it is possible to correct the situation. To do this, you need to update the drivers for the Wi-Fi adapter on your computer by installing them from the manufacturer’s official website.

Make a laptop or computer as a point Wi-Fi access For other devices the easiest way is through the command line. There is a lot third party programs, but their installation is unjustified, given that the process of enabling and disabling Wi-Fi distribution via the command line can be reduced to a couple of mouse clicks, which will be discussed below.

To enable Wi-Fi distribution Through a device on Windows 10 you need to do the following:

Launch the command line as administrator, and enter the command in it:

netsh wlan set hostednetwork mode=allow ssid=okeygeek key=1234567890

Note:

Ssid– setting the name of the created Wi-Fi network. In the example, the name of our site is “Okeygeek”, but when creating it you can specify any other network name.

Key– setting a password for the created Wi-Fi network. In the example, the password is the numbers “1234567890”. Please note that the password must be at least 8 characters.

When the command is written, press Enter.

Next, you need to enter another command into the command line:

netsh wlan start hostednetwork

This command will activate the Wi-Fi network, and after it it will appear in the list of devices available for connection by other devices.

As you can see, distributing Wi-Fi from a laptop on Windows 10 is not so difficult if you remember the commands that are responsible for it, but even this is not necessary. If you want to simplify the process of distributing the Internet via the command line, you need to do the following:

Launch Notepad on your computer and enter two lines:

netsh wlan set hostednetwork mode=allow ssid=okeygeek key=1234567890 netsh wlan start hostednetwork

As you can see, the process of turning on the Internet is reduced to a minimum, and there is no point in installing third party applications, the functionality of which is arranged in a similar way.

How to disable Wi-Fi distribution from a laptop on Windows 10

If you need to disable Wi-Fi distribution from your computer, you can do this in the command line running as an administrator using the command:

Netsh wlan stop hostednetwork

This process can also be automated, similar to enabling Wi-Fi distribution, by creating a corresponding file with the .bat extension.

Problems activating a laptop on Windows 10 as an access point

When setting up Wi-Fi distribution on a laptop or computer running Windows 10, the user may encounter a number of problems. Here are some options for solving them.

Windows 10 is the next step in the evolution of operating systems for desktop and desktop computers from Microsoft Corporation. Despite the fact that Windows 8 can be considered a failure, its release was still beneficial for developers. Windows 10 has absorbed all the best from all its predecessors and acquired an incredible number of new features and capabilities. Some of their list also relate to the functioning of a wireless network, so setting up Wi-Fi in a Windows 10 environment can cause problems for beginners who have purchased a device that operates on its basis.

In today’s article, we’ll look at how to set up Wi-Fi in 10, connect to an existing wireless network, and the problems associated with it.

Turn on the radio module

Connect to an active access point

Here is an algorithm of actions that the user will have to perform in order to connect to the broadcast WiFi point. Naturally, to do this, you need to know the connection password, if it is set, and enable the use of the radio module on your device running Windows 10.

Click on the network icon located in the tray.
Select the appropriate wireless connection and click on it.

Check the “Connect automatically” checkbox if you are using this access point as a permanent connection, and click “Connect”.

If you have a password consisting of 8 or more characters, enter it and save it if necessary.

See also: How to unblock the publisher of Windows 10

Additional wireless settings

Windows 10 is distinguished by a considerable list of Wi Fi parameters and its capabilities available to the user: viewing connection data, configuring security settings, configuring sharing, file sharing, remote access and viewing saved passwords.

Looking at the saved keys

Windows 10 provides the ability to view the password for the network to which your device is connected, for example, to connect to Wi-Fi using a smartphone or to transfer the key to a friend.

It's sad, but you won't be able to view the saved password for an inactive network.

To do this, go to the “Network Control Center...”.
In the “View active networks” frame, find “Wireless...” and click on its icon.

Call up the properties of the active WiFi connection.
In the “Status” window, click on the button indicated in the screenshot.

A window will appear with detailed information about the WiFi connection currently in use.

Go to the “Security” tab and activate the function of visualizing the characters entered in the security key field.

On the Windows 10 computer from which you configured the Wi-Fi router, you can also view the wireless connection encryption key.

Follow what is indicated in the user manual or on the sticker on the back/bottom cover of the router.

Typically this is 192.168.0.1.

Click on the “Wireless Mode” link.

In the “Protection...” or “Security” tab, move to the connection encryption method and see the key in the “PSK Password” field.

Removing an unnecessary connection

Call up the “Networks and Internet” menu item in the system settings.
Go to the first tab “WiFi”.
Click on the “Manage settings...” button below.

See also: When installing Windows 10 I started getting an error

Scroll down the list until you see the names of the access points.
Click on the name of the unnecessary wireless network and click “Forget”.

From now on, when a forgotten connection is detected, Windows 10 will not make automatic connections to it.

Creating a new connection using a TP-Link router

We turn on the device to the power supply and connect it to the computer using the included crimped twisted pair cable.
We are waiting for the router to load.
Open an Internet browser window and enter the starting address (look on the sticker on the case or in the user manual) to enter the router interface.
Enter the standard password and login values to gain access to the interface.

Typically this is "admin" for both lines. In any case, take a look at the technical documentation.

Go to the “Quick Setup” tab.

Using the functionality and tips of the wizard, we set the key Wi-Fi parameters.
Be sure to save the settings and reboot the router if the device reboot does not start automatically.

This concludes the review of the main features for working with WiFi in Windows 10.

(Visited 12,916 times, 45 visits today)

windowsprofi.ru

How to set up Wi-Fi on Windows 10: connecting to a network, viewing the password

Windows 10 became a continuation of the ideas of Windows 8, adopting from it good qualities and adapting even more to simultaneous work both with classic controllers like a mouse and keyboard, and with new touch screens focused on finger control. However, users who have just gotten used to working with 8 will need to adapt again to the changed external Windows view. Because of this, operations like Wi-Fi settings on Windows 10 cause difficulties for untrained people.

Connecting to an existing network

First, let's figure out how to connect to an already active broadcast Wi-Fi network. First, you should make sure that the activation button of the wireless adapter is in the on position. After turning on the module, you need to connect to the Wi-Fi network, for which you will need:

After these manipulations, the computer will be ready to work with web pages. As you noticed, connecting to Wi-Fi on Windows 10 is just as easy as in previous editions of the OS.

Interaction with networks

Windows is popular among users because it provides the ability to fine tuning almost every parameter. If necessary, with a little effort, the user can independently configure the OS functions as he sees fit. The same applies to the rich functionality for setting up networks: look up the IP address, set security and sharing parameters, transfer files to other computers in one work network– all this could be done in previous generations of Windows, and in new Windows 10.

The new OS also includes functions that allow you to find out the key to the connected network. So, if the user needs to look Wi-Fi password on Windows 10, in order to tell it to another person, you need to:

Forget saved network

You can also completely forget the Wi-Fi network on Windows 10 so that the computer does not connect to it on its own when it is available again. To do this, the user needs:

In turn, you can create a Wi-Fi network on Windows 10 in the same way as it was done in previous editions of the OS. This operation no longer falls on the system, but depends on the router used. Instructions for creating and configuring a network are always included with the router, according to general rules it looks like this:

The user needs to connect the network cable to the router, and plug the device itself into a power outlet and activate it.
Wait until the necessary indicators on the device body light up.
Go to your computer and check the list of broadcast networks.
Connect to an access point whose name matches the name of the router you are using.
Open an Internet browser and go to the router web interface page. Depending on the device model, this may be the address “192.168.0.0” or “192.168.0.1”, but this parameter is individual for each manufacturer, and here it is better to use the operating instructions.
Log in to the router menu using the standard login-password pair. This parameter also depends on the manufacturer.
Use the wizard quick setup. Most routers have this function, including budget models. Following the program prompts, the user will sequentially set all the necessary network parameters, including its name, password and the number of devices that can connect to this access point at the same time.

Important! After the setup is completed, save the changes, since many router models tend to reset the settings to factory settings after shutdown and do not save the specified data automatically.

Also, access to the Internet often requires action on the part of the provider - this should also be checked with the company providing access to the Internet. worldwide network.

Conclusion

So, Windows 10 provides all the same tools for managing your Internet connection as previous versions of the OS. To a large extent, the differences lie only in the visual design of some sections of the settings menu and their adaptability to touch control.

WindowsTen.ru

Setting up Wi-Fi in Windows 10

To easily create a software WiFi router in Windows 10, you need to:

Windows 10 OS.
WiFi adapter.
The presence of the Internet itself.

The article looked at an ADSL connection as an example. But in reality, you can use absolutely anything: PPPoE, Wi-Fi from a second adapter, and so on.

To configure wifi distribution via the command line (cmd), use the commands:

netsh wlan set hostednetwork mode=allow
netsh wlan set hostednetwork mode=allow ssid=FastWifi key=12345678 keyUsage=persistent

The procedure for setting up a Wi-Fi network is as follows:

First, you should check whether the Wi-Fi router is working. For example, on laptops the virtual WiFi adapter may well be disabled in the BIOS itself. On laptops, to make sure it works, you can use the Fn+Fx or Fn+F3 keys. But the easiest way to check is by clicking on the “Network” icon and checking if any other networks are available. If yes, then everything is in order (if someone nearby is giving access).

You need to make sure that there is unhindered access to the network. The console will help with this, in which you need to enter the “ping” command, or by opening any browser. This way we will make sure that we can distribute the Internet.

You should make sure that the “WLAN Service” is running, including “Routing”. This can be done as follows: Control Panel, then go to Administration.” Standard settings services should start automatically. However, there are cases when, after optimizing a PC, specialists turn them off. With this optimization option, specialists can often harm the operating system, and it will be difficult to try to distribute the Internet.

After making sure that the services are working, you need to start Windows console using the “cmd.exe” command with all administrator rights. The best option would be to open WinX in the menu operating system. It contains “Command Prompt (Administrator)”. You can open it using Win+X.

Opening the Windows 10 OS console, enter:

netsh wlan set hostednetwork made=allow ssid=winap key=123456789 keyusage=persisstent

The team creates wireless point with parameters:

winap network name;
Password 123456789.

It can be copied from this article to save time. It looks like this in the image:

Instead of “winap” and “123456789”, you may need to enter your desired name and password, respectively, which you are going to use when accessing Wi-Fi. This will not only protect your network from hacking, but will also prevent you from forgetting your password and access name.

It is worth paying attention to the fact that: the password for accessing the wireless network should consist of no more than 8 characters; the Cyrillic alphabet does not need to be entered to avoid confusion.

After the work is done, you can try to distribute wireless Internet. In the same console you should enter:

netsh wlan start hostednetwork

netsh wlan show hostednetwork

The last of them displays the presence or absence of access to the Internet. This can be seen in the image:

Upon completion of the check, you should go to “Network Connections” in Windows 10 using the Control Panel.

IN in this example“Ethernet” is the source of the Internet network. In this case, “Connection via local network 3 winap” is an access point. It is in working condition. It is recommended to assign a new name to the wireless network so as not to confuse it with anything else in the future.

After this, you should expand your Internet connection using “Windows ICS”. To do this, hover over the connection (in the photo it’s “Ethernet”), then right-click, after “Properties”, then go to the “Access” tab. Ultimately, he clicks to enable ICS and establish a connection with the one who is trying to distribute traffic - to WiFi “winAP”.

Upon completion of all actions, connect to WiFi networks and check whether the Internet can be distributed or not. In the console you can run the command

netsh wlan shaw hostednetwork

It shows how many users are currently using your Internet distribution with all their might.

How to manage an access point

By performing certain actions you can control the access point, namely:

netsh wlan stop hostadnetwork

The command stops the wifi network.

netsh wlan set hostednetwork mode=disalow

Command to completely remove access point data from the system. This is done instantly and there is no provision for a reversible process.

netsh wlan start hostednetwork

The command installs automatic starts networks. Thus, it is added to startup. Moreover, it is allowed to be written into a cmd script. All that needs to be done for this is to indicate that it is launched as an administrator (otherwise this will not be possible), and then add the script to startup. Please note: it is required that access to the wireless network is also established when loading Windows Version 10. Otherwise, despite the functionality of the access point, there will be no Internet.

Without any doubt, it will take no more than 5 minutes to start distributing the Internet in this way. However, this does not require the use of additional special programs. This method network connection allows you to create a WiFi router in a short time without any problems and distribute the Internet. Moreover, you can use it anywhere and any time of the day. If you plan to use the network access point every day, the best option would be to purchase a router. Since this option is convenient only for those who use it on work trips, or even need it several times a month.

Possible problems

If it happens that the Wi-Fi wireless network is not working without any reason, blame the operating system Windows system 10 should not be used, the problem is clearly in the settings. Some of the popular problems in this case are:

WiFi router drivers – it is advisable to reinstall them.
The problem is in the router itself.
Perhaps the actions were carried out incorrectly.
Perhaps all services that are responsible for access are disabled.
There may be a virus on your computer that is stopping it from working.

For example, when starting the operating system, the Wi-Fi router driver may not ask the virtual adapter to exit standby mode. When loading Windows systems 10, the service continues to be in this state.

The procedure for creating and setting up a point WiFi access router to a wireless network can also be used for Windows earlier versions, in particular version 8 and 8.1.

Found a typo? Select the text and press Ctrl + Enter

ZnaiWifi.ru

How to connect to Wi-Fi on Windows 10?

IN lately Everyone just writes about Windows 10. Some criticize, some really like the system, everyone is updating, testing and all that. I also try to be in the “trend” :), so I put the ten next to the already installed Winodws 7, and used it a little. Well, of course, I checked how Wi-Fi works, and how network management is generally organized. Even compared to Winodws 7, practically nothing has changed, there are just some more settings that are tailored for touch screens.

The panel for connecting to Wi-Fi networks has changed a little; now you can turn Wi-Fi on or off in just two clicks. The main thing I liked was this automatic installation all drivers, including network card and Wi-Fi receiver. On my laptop, a model like 2013, all the drivers were installed automatically. I really don’t know how it will be on other computers, but this is very cool, because on the same Winodws 7, there have always been many problems connecting to Wi-Fi, precisely because of the drivers. The only thing I haven’t found is where to look up the password for the Wi-Fi network in Windows 10. The method I wrote about in this article is not suitable. There simply is no "Manage wireless networks" item. I’ll study this topic a little more and write about how to remember the password on the “ten”.

In this article I want to show you how to connect to Wi-Fi on Windows 10. I’ll also show you where the wireless network settings are located.

Connecting a laptop or tablet on Windows 10 to a Wi-Fi network

Everything is very simple, and also beautiful. On the notification panel (in the lower right corner), click on the button in the form of network divisions ( WiFi antennas). If you have a Wi-Fi driver installed, but the adapter itself is turned off, then the icon will have a red cross, and if there are networks available for connection, it will have an asterisk.

Click on this icon, and if Wi-Fi is turned off, then click on the corresponding button and turn on the wireless adapter.

Immediately after turning on the wireless adapter, the networks available for connection will appear at the top. Click on the desired network and click on the Connect button. You can uncheck the Connect automatically option if you do not want your device to establish a connection to this network itself.

If the network is protected by a password, you will need to specify it.

Next, the system will ask if you want your computer to participate in home network. Other devices will see it. If you are connecting to your home network, I recommend clicking Yes. So that later there will be no problems with setting up the local network.

That's it, your computer will be connected to the Internet. By clicking on the network you are connected to, you can easily disconnect from it.

You can finally test it new browser - Microsoft Edge. An interesting browser by the way, I would like to see your reviews about it.

How to open Wi-Fi settings on Windows 10?

Click on the connection icon and click on the link Network settings.

The "Network and Internet" settings will open. There are wireless network settings.

You can also open the familiar network and sharing control panel. Just right-click on the connection icon and select Network and Sharing Center. And then everything is the same as in Windows 7 and 8, managing adapters, etc.

So far I have not heard about any problems with Wi-Fi on Windows 10, errors, crashes and the like. Well, by tradition, the most popular problem is “no Internet access”, or rather the connection status is “Limited”, with a yellow triangle next to the network icon. As a rule, the router is to blame. Or rather, incorrect setting. If you have such an error, then see the article: “Connection is limited” in Windows 10 via Wi-Fi and network cable.

I would be grateful for your comments on the topic of the article. Write how you like Windows 10, whether there are any problems with accessing the Internet via Wi-Fi, or about any new features of the system.

help-wifi.com

How to connect Wi-Fi on Windows 10?

Without a doubt the way out new version popular operating system became one of the main events of 2015 in the field of IT technologies. Following months, which for many users felt like an eternity, a flurry of criticism, discussions and questions followed. Of course, most users, after installing the update, rushed to check what they had added to the main functions of the “ten”. Of course, one of the main functions of the OS is connecting to a wireless Internet network. Overall, something extraordinary in Wi-Fi work the creators did not implement it. In addition, many similarities in this component can be found with a similar process in its predecessor versions. But, as you understand, this would not be a new OS if the functions and settings were left without innovations compared to Windows 7 and 8. Today we will talk about the benefits of Wi-Fi and how to connect Wi-Fi on Windows 10.

New Wi-Fi features in Windows 10

In general terms, this element got a modified panel for connecting to wireless networks. In particular, turning Wi-Fi on and off can be done in two clicks.

What we can praise the developers for is the integration of such an option as automatic installation of all drivers.

How to create a restore point in Windows 10?

How to prepare a laptop and tablet for connection?

In principle, there is nothing abstruse in this process - fortunately, the creators decided not to reinvent the wheel and did everything beautifully and simply. We go down to the bottom of the screen, where the notification panel is located. Click on the wireless network icon. If the adapter is turned off, there will be a red cross on the icon. In the case when both the adapter and the driver are in perfect order, the icon will have an asterisk. Therefore, to connect to the Internet, you should select a specific network and click on it.

After this, a “Connect” button will appear under the name of the potential Internet “supplier” network. In addition to this, you will also see the “Connect automatically” option, which you can check if you want your laptop or PC to independently connect to the selected network.

Of course, in most cases, wireless network distributors set a password for their network, so after connecting, the system will ask you to enter the network security key. After entering it, a request will appear asking you to allow other PCs to detect your device. IN in this case, it is better to give a positive answer in order to avoid future embarrassment with setting up a local network. That's it, now your device is ready to receive a signal.

Calling up wireless Internet settings. View Password

At the end of the list available networks There is a link “Network settings”. After clicking it, the “Network and Internet” subsection will appear, in which you can enable or disable network access, select a network and make settings in the “Advanced Settings” item.

Regarding security code, then users often experience some difficulties with it. This question is especially relevant for those who use one router from several devices. To achieve your goal you need to follow a couple of simple steps. First, go to the “Network and Sharing Center” section, which can be accessed using the Control Panel. In the window that appears, select the “Wireless network” link (located in the right top corner), then select the Wireless Properties button.

How to clean Windows registry 10?

After this, the “Connection” and “Security” tabs will appear, go to the second one.

The password is typed opposite the “Network security key” line. In order to see the characters, you need to check the box next to the “Display entered characters” item.

How to forget/create a network?

In order for your device to stop connecting to a certain network on its own as soon as it is active again, you need to go to the “Settings” section, the “Network and Internet” subsection and select the Wi-Fi option. In the window on the right, select “Manage Wi-Fi network settings.” A list of known networks will appear in front of you, from which you should select the one you want to forget. Actually, after clicking on the name of the network, the system will offer to perform the desired action.

Thus, the system will exclude the selected network from the “registry” and independent connection will stop.

The process of creating a network is no different from its predecessors.

Make sure your router is active, then look through the list of available networks. As soon as you see in this list name similar to the name of the router model, connect. Then go to your browser and open the router’s web interface page. After this, enter your username and password to access the menu. In the menu you can already use the quick preparation wizard, which will tell you everything necessary instructions to create a new access point.

Advantages and Disadvantages of Wi-Fi Connection in Windows 10

In general, there are no numerous (or even isolated) complaints about connecting to a wireless network in the Top Ten yet. The developers tried to make sure that life was not complicated for users and harmoniously integrated their innovations into the process. As you can see, having learned about some of the nuances of the principle of connecting a computer to a network, it is unlikely that further system may prevent you from safely browsing the web from your device.

The biggest problem with connecting to Wi-Fi, which is also present in previous versions, is the evil yellow triangle with exclamation mark. It often frustrates users, but the system is not to blame. The “Restricted” status appears due to malfunctions of the router. And this, as they say, is a completely different story. How to fix the error " Windows installation on this disk impossible"?

In one of our next articles we will tell you how to find out the Wi-Fi password.

If you still have questions on the topic “How to connect Wi-Fi on Windows 10?”, you can ask them in the comments

Was the material useful to you? Leave your review or share on social media. networks:

(2 ratings, average: 3.00 out of 5) Loading...

The article discusses ways to distribute the Internet via the Wi-Fi module of your laptop or PC (with a connected Wi-Fi adapter) running the Windows 10 operating system. We suggest taking advantage of the system’s hardware capabilities, which do not require installation and configuration additional programs, not included in the standard OS Windows package.

Checking the possibility of distributing Wi-Fi

To do this you will need:

Launch the command line in Windows 10 with administrator rights. Right-click on the “Start” button and select the appropriate item in the menu that opens;

in the dialog box that opens, enter the command netsh wlan show drivers;
in the information that appears, find the line Hosted Network or “Hosted Network Support”, and check that the line opposite the line is “Yes”;

otherwise update Wi-Fi drivers adapter by visiting the website of the laptop or device manufacturer. Repeat the steps described above and make sure that the driver allows you to distribute the Internet via Wi-Fi.

In some configurations, rolling back the device driver to previous version. Go to the device manager, in the “Network adapters” subsection, find the required device, go to the driver tab, roll back.

In cases where manipulations with drivers do not give the required result, contact service center laptop manufacturer.

Setting up Internet distribution using the command line

Using this tool is the easiest way to configure the required connection type. Let's start:

run the command prompt again as administrator;
enter the command netsh wlan set hostednetwork mode=allow ssid=mywifi key=mypassword . The ssid value will set the name for your network, and key will be the access password. Please note that the password must be entered in Latin and contain at least 8 characters;
enter the command netsh wlan start hostednetwork . If you did everything correctly, the system will respond with a notification that the network has started.

If you do not see any error messages, you will be able to connect devices to the network, but to access the Internet you will need to perform a few more steps, which we will discuss later.

If Windows 10 gives you an error message, try the following steps:

Turn off and, after restarting the laptop, turn on the adapter again in the device manager.
Alternatively, delete wifi adapter, and update the system configuration.
In the “Network Adapters” tab, using the “View” menu, enable the display of hidden devices. Find the virtual adapter, and if it appears inactive, enable it through the right-click menu.

I connect to the network, but Internet access is blocked, what should I do?

To allow Internet access to devices connected to your laptop via Wi-Fi in Windows 10:

go to the “Network Connections” tab;
choose network connection, used by the system to access the Internet;
In the “Access” tab, check the box that allows other network devices to use the connection.

In most cases, after this you will be able to use the Internet distributed via Wi-Fi from the Windows 10 operating system.

Do you need to disconnect your network? Enter the command netsh wlan stop hostednetwork in a command prompt running with administrator rights.

Known issues and solutions

If you strictly followed the instructions, but distributing the Internet via Wi-Fi from a computer running Windows 10 still doesn’t work, try:

disable Internet distribution via Wi-Fi, then the connection used to access the Internet and restart them;
manually enter the IPv4 parameters and subnet mask in the created connection using the template 192.168.173.*., where * is replaced with a number for each new device, and the mask is 255.255.255.0;
Make sure that the firewall of your antivirus software running on a Windows 10 system is not blocking the general network connection. Check by turning off antivirus program, and trying to access the network from a tablet or smartphone;
check whether you have shared access to the same network;
repeat all steps of the instructions.

Congratulations! You have just learned how to distribute the Internet via Wi-Fi using a device running Windows management 10.