Is it possible to enable VPN? VPN - what is it, how to set up and use the service? Additional connection properties

Electronic communications are improving every year, and information exchange increasingly high demands are placed on speed, security and quality of data processing.

And here we will take a detailed look at the VPN connection: what it is, why a VPN tunnel is needed, and how to use a VPN connection.

This material is a kind of introductory word to a series of articles where we will tell you how to create a vpn on various operating systems.

vpn connection what is it?

So, a virtual private network vpn is a technology that provides a secure (closed from external access) connection of a logical network over a private or public one in the presence of high-speed Internet.

Such a network connection of computers (geographically distant from each other at a considerable distance) uses a “point-to-point” connection (in other words, “computer-to-computer”).

Scientifically, this connection method is called a VPN tunnel (or tunnel protocol). You can connect to such a tunnel if you have a computer with any operating system, which integrates a VPN client capable of “forwarding” virtual ports using the TCP/IP protocol to another network.

Why do you need a VPN?

The main benefit of a vpn is that negotiaters need a connectivity platform that not only scales quickly, but also (primarily) ensures data confidentiality, data integrity, and authentication.

The diagram clearly shows the use of VPN networks.

Rules for connections over a secure channel must first be written on the server and router.

How VPN works

When a connection occurs via VPN, the message header contains information about the IP address of the VPN server and the remote route.

Encapsulated data passing over a shared or public network cannot be intercepted because all information is encrypted.

The VPN encryption stage is implemented on the sender's side, and the recipient's data is decrypted using the message header (if there is a shared encryption key).

After the message is correctly decrypted, a VPN connection is established between the two networks, which also allows you to work on a public network (for example, exchange data with a client 93.88.190.5).

Concerning information security, then the Internet is an extremely unsecured network, and a VPN network with OpenVPN, L2TP / IPSec, PPTP, PPPoE protocols is completely secure and in a safe way data transmission.

Why do you need a VPN channel?

VPN tunneling is used:

Inside corporate network;

To unite remote offices, as well as small branches;

For digital telephony services with a wide range of telecommunications services;

To access external IT resources;

For building and implementing video conferences.

Why do you need a VPN?

VPN connection is required for:

Anonymous work on the Internet;

Downloading applications when the IP address is located in another regional zone of the country;

Safe work in corporate environment using communications;

Simplicity and convenience of connection setup;

Ensuring high connection speed without interruptions;

Creating a secure channel without hacker attacks.

How to use VPN?

Examples of how VPN works can be given endlessly. So, on any computer in the corporate network, when you establish a secure VPN connection, you can use mail to check messages, publish materials from anywhere in the country, or download files from torrent networks.

VPN: what is it on your phone?

Access via VPN on a phone (iPhone or any other Android device) allows you to maintain anonymity when using the Internet in public places, as well as prevent traffic interception and device hacking.

A VPN client installed on any OS allows you to bypass many of the provider’s settings and rules (if the provider has set any restrictions).

Which VPN to choose for your phone?

Mobile phones and smartphones running Android OS can use applications from Google Playmarket:

• - vpnRoot, droidVPN,
• - tor browser for surfing networks, aka orbot
• - InBrowser, orfox (firefox+tor),
• - SuperVPN Free VPN Client
• - OpenVPN Connect
• - TunnelBear VPN
• - Hideman VPN

Most of these programs are used for the convenience of “hot” system setup, placing launch shortcuts, anonymous Internet surfing, and selecting the type of connection encryption.

But the main tasks of using a VPN on your phone are checking corporate mail, creating video conferences with several participants, as well as holding meetings outside the organization (for example, when an employee is on a business trip).

What is VPN on iPhone?

Let's look at which VPN to choose and how to connect it to your iPhone in more detail.

Depending on the type of network supported, when you first start the VPN configuration on your iPhone, you can select the following protocols: L2TP, PPTP and Cisco IPSec (in addition, you can “make” a VPN connection using third-party applications).

All of the above protocols support encryption keys, user identification using a password and certification are carried out.

Among additional functions When setting up a VPN profile on an iPhone, you can note: RSA security, encryption level, and authorization rules for connecting to the server.

For iPhone phone From the appstore you should choose:

• - free application Tunnelbear, with which you can connect to servers VPN any countries.
• - OpenVPN connect is one of the best VPN clients. Here, to launch the application, you must first import RSA keys via iTunes into your phone.
• - Cloak is a shareware application, since for some time the product can be “used” for free, but to use the program after the demo period has expired, you will have to buy it.

VPN creation: selection and configuration of equipment

For corporate communications in large organizations or associations of offices remote from each other, they use hardware equipment that can support continuous, secure work on the network.

To implement VPN technologies, the role of a network gateway can be: Unix servers, Windows server, network router and network gateway on which VPN is installed.

The server or device used for creating vpn enterprise network or VPN channel between remote offices must perform complex technical tasks and provide a full range of services to users both on workstations and on mobile devices.

Any router or VPN router must provide reliable operation on the network without freezes. And the built-in VPN function allows you to change the network configuration for working at home, in an organization or in a remote office.

Setting up VPN on the router

IN general case VPN configuration on the router is carried out using the router's web interface. On “classic” devices for vpn organizations you need to go to the “settings” or “network settings” section, where you select the VPN section, specify the protocol type, enter the settings for your subnet address, mask and specify the range of IP addresses for users.

In addition, to secure the connection, you will need to specify encoding algorithms, authentication methods, generate agreement keys, and specify DNS server WINS. In the “Gateway” parameters you need to specify the gateway IP address (your own IP) and fill in the data on all network adapters.

If there are several routers in the network, you need to fill out the VPN routing table for all devices in the VPN tunnel.

Here is a list of hardware equipment used to build VPN networks:

Dlink routers: DIR-320, DIR-620, DSR-1000 with new firmware or Router D-Link DI808HV.

Routers Cisco PIX 501, Cisco 871-SEC-K9

Linksys Rv082 router with support for about 50 VPN tunnels

Netgear router DG834G and routers models FVS318G, FVS318N, FVS336G, SRX5308

Mikrotik router with OpenVPN function. Example RouterBoard RB/2011L-IN Mikrotik

VPN equipment RVPN S-Terra or VPN Gate

ASUS routers models RT-N66U, RT-N16 and RT N-10

ZyXel routers ZyWALL 5, ZyWALL P1, ZyWALL USG

Today, Internet users increasingly use the term VPN. Some recommend using it more often, while others recommend avoiding it. Let's take a closer look at what is hidden behind this term.

VPN connection, what is it?

VPN(Virtual Private Network) is technology, which provides communication closed from external access in the presence of a high connection speed. This connection is carried out according to the principle “ dot - dot" In science, this connection method is called tunnel. You can join the tunnel at PC with any OS, wherein VPN client installed. This program “forwards” a virtual port using TCP/IP to another network.

To implement such a connection, you need a platform that quickly scales and ensures data integrity and confidentiality.

In order for the PC to IP address 192.168.1.1-100 connected via a gateway to an external network, you need to set the connection rules on the router. When is it carried out? VPN connection, the message header contains the address of the remote PC. The message is encrypted by the sender and decrypted by the recipient using a shared key. After this, a secure connection is established between the two networks.

How to connect a VPN

A brief diagram of the protocol's operation was previously described. Now we’ll find out how to connect a client on a specific device.

On a computer and laptop

Before you set up VPN connection to Windows 7 PC, should specify IP address or server name. To do this in " Network Sharing Center" on " Control panels" need to " Create a new connection».

Select item "" - " (VPN)».

At the next stage you should specify Name And server address.

You need to wait for the connection to complete.

Let's check the VPN connection. To do this in " Control Panel" In chapter " Network connections » call context menu, double click on the shortcut.

On the " Details" need to check IPv4 address. It must be within the IP range specified in the VPN settings.

On your phone, iPhone or tablet

Now let's look at how to create a VPN connection and configure it on gadgets running Android OS.

For this you need:

• smartphone, tablet;
• login, password for the network;
• server address.

To set up a VPN connection, you need to select “” in your phone settings and create a new one.

An icon with a new connection will appear on the screen.

The system requires a login and password. You need to enter the parameters and select the "" option. Then at the next session you will not have to confirm these data again.

Once the VPN connection is activated, a characteristic icon will appear on the toolbar.

If you click on the icon, the connection details will appear.

How to set up a VPN to work correctly

Let's take a closer look at how to automatically configure VPN on computers with Windows 10 OS.

Go to PC settings.

In chapter " Options"go to the subsection "".

... and add a new VPN connection.

On next page you should specify the VPN connection parameters:

• Service Provider - Windows;
• Connection name;
• Server address;
• VPN type;
• Username and password.

Once the connection is established, you need to connect to it.

How to create a VPN server

All providers record the activities of their clients. If you receive a request from law enforcement they will provide full information about which websites the offender visited. Thus, the provider relieves itself of all legal liability. But sometimes situations arise in which the user needs to protect his data:

• Companies transmit their data over the Internet via an encrypted channel.
• Many services on the Internet operate based on geographic location. For example, the Yandex.Music service operates only on IP from the Russian Federation and CIS countries. A Russian, while in Europe, will not be able to listen to his favorite music.
• Offices often block access to social networks.

You can, of course, clear your browser history every time you visit a site. But it’s easier to create and configure a VPN server.

To do this you should call command line (Win+R), and then enter your query ncpa.cpl and press Enter. In a new window click Alt and select "".

Next you need to create a user and give him limited rights only to VPN. You will also have to come up with a new long password. Select a user from the list. At the next stage you need to select the connection option " Through the Internet».

How to use a VPN

Once a new connection has been created, all you need to do is open your browser and load any page.

Beginners can skip creating a connection and immediately download a VPN client from the Internet or install a special browser extension. After downloading the program, you need to launch it and click the “ Connect" The client will join another network and the user will be able to view sites prohibited in his region.

Disadvantage this method is that the IP is issued automatically. The user cannot select a country. But the connection is set up very quickly, by pressing just one button. The option of adding an extension also has disadvantages. Firstly, the user must be registered on the official website of the program, and secondly, the extension often crashes. But the user can choose the country through which the connection to the external network will be made. The connection process itself also does not raise any questions. Just press the button " Start" and the browser will reboot to new network. Let's look at how to install the extension using an example ZenMate VPN.

Download the program from the official website. After installation, the following icon will appear in the browser:

Click on the icon. The extension window will appear:

If you move the mouse cursor to icon with the Russian flag, then the screen will display current IP. If you move the cursor over the icon with the Romanian flag, the IP of the selected server will appear. If desired, you can change the connection country. To do this, click on the globe and select one of the automatic addresses.

Disadvantage free version The program is a small number of available servers and the imposition of advertising.

The most common mistakes

Various antivirus programs, and firewalls may block the connection. In this case, an error code is displayed on the screen. Let's look at the most popular problems and ways to solve them.

Many Internet users various reasons dream of being anonymous on the Internet. There are ways to hide your own presence on certain resources. One of them is actively used not only by advanced users, but even by beginners. We invite you to find out: VPN - what it is and how to configure it correctly on a computer, tablet and smartphone.

VPN connection - what is it?

Not every Internet user knows what a VPN is for. This term is understood as a generalized name for technologies that make it possible to provide one or more network connections over another network. Although communications can be carried out over networks with an unknown or lower level of trust (for example, public networks), the level of trust in the constructed logical network will not depend on the level of trust in core networks thanks to the use of cryptography.

How does a VPN work?

To understand how to use a VPN, you can look at the example of how a radio works. In essence, it is a transmitting device (translator), an intermediary unit (repeater), which is responsible for the transmission and distribution of the signal, and at the same time a receiving device (receiver). The signal may not be broadcast to every consumer, but virtual network functions selectively, combining certain devices into one network. In neither of the two cases are wires needed to connect transmitting and receiving devices.

However, this also has its moments, since initially the signal was unprotected, which means that it could easily be received by anyone with a device operating at a given frequency. A VPN connection works on exactly the same principle, but here instead of a repeater there is a router, and a stationary computer terminal acts as a receiver. mobile device or a laptop, which are equipped with a certain wireless connection module. The data coming from the source is encrypted at the very beginning and only later is reproduced using a decryptor.

Can ISP block VPN?

Having learned about all the benefits of new technologies, Internet users often wonder whether VPNs could be banned. Many active users have already convinced themselves personal experience that the provider is indeed capable of blocking VPN. Such cases occur for various reasons, both technological and ideological. Sometimes providers block VPNs because its use can lead to various restrictions for users.

VPN programs

In the top of the most famous VPN programs:

• OpenVPN;
• PGP Desktop;
• UltraVPN;
• HideGuard VPN.

To choose the best VPN, you should follow these recommendations:

1. He is able to provide complete safety or anonymity on the Internet.
2. Such a service should not keep logs. Otherwise, anonymity may disappear.
3. The connection address to the service must have exactly the same form as the IP address.
4. Best VPN service must not have his own office. If there is a company registration or an office, such a service cannot guarantee anonymity.
5. There should be free trial access.
6. The site has a ticket system.

VPN for Windows

Installing a VPN for your computer is very simple and accessible even to inexperienced users. To do this, you need to go to the website of one of the developers and download the corresponding files. The installation process follows the standard procedure. After your personal profile is configured, access to a remote VPN server will be available, through which you will work on the network.

Before going to any website, the VPN service creates a new IP address so that the user remains anonymous and opens an encrypted channel that will keep the information confidential, known only to the user. This installation will allow office employees to bypass the bans imposed on certain sites and, in their free time from work, search for information of interest and anonymously remain on their favorite sites.

1. PureVPN.
2. ExpressVPN.
3. SaferVPN.
4. Trust.Zone.
5. NordVPN.
6. ZenMate VPN.

A good and reliable service will cost money, but if the user does not use programs that require maximum speed Internet, you can use free clients:

1. Betternet.
2. CyberGhost 5.
3. Hola.
4. Spotflux.
5. Hide.me.

VPN for Android

First you need to download and install the client on your device. To do this, go to Play Market and choose what suits us. Recommended VPN services:

1. SuperVPN.
2. VPN Master.
3. VPN Proxy.
4. Tunnel Bear VPN.
5. F-Secure Freedome VPN.

Advanced users know that VPN setup for Android has its own characteristics. To install it on your smartphone, you must go through the following steps:

1. Find the “Other networks” section in the phone settings (the “Connections” tab).
2. Go to the VPN section. Here the smartphone will prompt you to set a password or PIN code for unlocking, if this has not been done previously. Without such a PIN code, it is impossible to add and use a connection using the built-in tools.
3. After completing the previous steps, you can add a VPN. For this purpose, you need to select a type and enter network data. This also includes the server address and an arbitrary connection name. After this, you need to click the “Save” button.
4. You need to touch the added connection, enter your username and password, and connect to the network.
5. A connection indicator will be displayed in the notification panel, and when touched, a pop-up window will open with statistics of the transferred data and a button for quick disconnection.

VPN for iOS

You can install a VPN client on an iOS device, especially since they already have built-in services. To do this you need:

1. On home page on the main screen, click on the “Settings” icon.
2. In the new window, select “Basic”.
3. The next steps are to select Network then VPN (Not Connected).
4. In the new window, click “Add VPN configuration”.
5. Fill in the text fields of the L2TP tab.
6. Set the radio button for all data to enabled and click “Save”.
7. Set the VPN switch to enabled.
8. Once at least one connection has been configured on the device, the option enable VPN will be displayed in the main settings window, making it easier and faster to re-enable the VPN.
9. Once the VPN is connected, you can check its status. In the status window you can see information such as server, connection time, server address and client address.

1. Hotspot Shield.
2. TunnelBear.
3. Cloak.

VPN for Windows Phone

VPN connection is also available for Windows Phone 8.1. The setting will allow you to gain access to prohibited resources limited through regional blocking. At the same time, the IP address can easily be hidden from strangers, that is, it is located on the network completely anonymously. You can install VPN in the system settings of the menu item of the same name. After turning it on, you need to click on the plus button and add the required connection.

Every time you turn on the device, the connection is established in automatic mode and when the “Send all traffic” option is activated, the traffic will be redirected not through the servers of the operator’s providers, but through the available VPN server. If you need to configure a proxy server, various uses on home and work computers, you need to use the “Advanced” section.

In the Windows Phone market best clients recognized:

1. Check Point Capsule VPN.
2. SonicWall Mobile Connect.
3. Junos Pulse VPN.

How to install a VPN?

Setting up a VPN anonymizer on Windows 7 is available to every Internet user. To do this, you need to go through simple steps:

1. Click "Start".
2. Select "Control Panel".
3. The next step is “Network and Sharing Center”.
4. On the left, find “Setting up a connection or network.”
5. Click “Connect to a workplace”, then “Next”.
6. Select “Don’t create a new connection”, then “Next”.
7. Click “Use my Internet connection.”
8. Select “Delay decision”, “Next”.
9. In the “Address” line, you must enter the name (or address) of the VPN server.
10. In the Name field, enter an acceptable name for the connection.
11. Check or uncheck “Allow other users to connect through the created connection.”
12. Enter your login and password to connect to the virtual private network. An Internet provider or system administrator will help with this.
13. Click "Create". All is ready.

How to use a VPN?

To take advantage of all the benefits of anonymous browsing, you need to not only understand what a VPN is, but also know how to set up a VPN. After correct installation even a novice Internet user can use it. The connection to the Internet will be established after the personal VPN session is opened, and the connection to the Internet will occur after it is closed. In this case, each computer connected to the network will have its own login and password. Such personal data is confidential personal information.

A VPN shortcut is installed on the desktop of a computer connected to the network, which launches the Internet. When you double click on the shortcut, a window will open asking for your password and login information. If you check the “save username and password” box, you will not need to enter the data each time, but in this case the personal session will not be confidential.

How to disable VPN?

Anonymous stay on the Internet is guaranteed by connecting via VPN to a computer, tablet or. To disconnect a session, that is, the Internet in general, you need to double-click on the VPN shortcut. After this, the window “Set up a VPN over the Internet” will open. Here you need to click on “disable”. After this, the session will be ended, the icon on the desktop will disappear, and access to the Internet will be blocked.

Although VPN- this is the safest and effective method bypass censorship bans and geographical restrictions, some corporations and government agencies are still trying to control Internet access and stay one step ahead. Anti-VPN technology can identify and block VPN traffic from local networks and websites, thereby reducing the effectiveness of the VPN.

Reasons for blocking VPN traffic a lot: from copyright protection to attempts to censor the Internet. In 2017, Chinese authorities ordered Internet service providers to block all VPNs used to bypass the Great Firewall of China. The same methods, but on a smaller scale, are used in companies and schools to limit Internet activity.

In 2014, Netflix, under pressure from media companies, accepted a number of measures against VPN, when it was discovered that content could be streamed outside of permitted regions.

However VPN blocking features are far from omnipotent, and there are still many opportunities fight such restrictions.

1 Use a quality VPN

A truly good VPN provider can bypass blocks by frequently changing the IP addresses of their servers so that their traffic is not recognized as VPN traffic.

2 Change VPN server or virtual location

To bypass some VPN blocks Just change the location or server in the VPN connection.

3 Use a dedicated IP address

Several VPN providers offer the use of a dedicated IP address, which is much more difficult to identify as a VPN server because only one user is connected to it.

4 Run OpenVPN on port 443

Port 443 is usually used in TLS/SSL traffic encryption protocols, which are widely used for working with sites containing confidential data such as details credit cards or bank accounts.

And since OpenVPN already implements SSL encryption, switching the VPN to port 443 can help bypass almost any firewall with DPI.

How to use port 443

Most quality VPN providers allow you to switch the VPN to a different port or provide servers in different regions that allow access to port 443. If you need help using port 443, contact your VPN provider's support team.

5 Use StealthVPN/obfuscation

In many VPN protocols, data packets have headers that help firewalls understand that this is VPN traffic. Thanks to camouflage obfuscation technology, VPN will be able to hide or rewrite data packet headers.

6 Use Shadowsocks

Shadowsocks is an open source application that transmits data through proxy servers using the SOCKS5 protocol bypassing Internet filters. This mechanism is similar to a VPN, but is more difficult to detect due to less centralization.

More complex techniques

If desired, you can also help you try more advanced techniques to bypass VPN blocks.

1. Tor

For maximum privacy and effective fight against blocking, you can pass traffic through the Tor network.

Configure the OpenVPN protocol to access Tor networks via Obfsproxy is quite difficult, but some VPN providers support VPN-over-Tor.

2. SSL tunneling

SSL tunneling protects traffic using SSL/TLS encryption. If the connection, especially through OpenVPN, is protected by SSL tunneling, then distinguishing VPN traffic from HTTPS traffic becomes more difficult.

VPN blocks

Blocking by IP address

When connected to the Internet via VPN sites see the IP address of the proxy server, not your actual device.

Netflix and other companies compare IP addresses against databases of known VPN servers or common addresses and then block those addresses. To avoid this, VPN providers regularly change the IP addresses of their servers.

Blocking by port

To deny access to VPN network administrators can close ports that are often used by VPN services. The easiest way to bypass this blocking is to use other ports.

Deep Packet Inspection (DPI)

DPI technology analyzes all traffic on the network to detect VPN traffic, and then block, log, or redirect it.

The best VPNs to bypass VPN traffic blocks

To bypass any VPN blocks, it is important to use the best VPN services, since, unfortunately, not every VPN service copes well with this. You will need a VPN with big amount servers and regular changes of IP addresses on these servers.

If your VPN is blocked on Netflix and similar sites, It's best to switch to a different VPN provider. In this case, there are several excellent services, especially and.

1.

• Military encryption algorithm and highest speed connections
• No activity logs
• More than 2000 servers in 94 countries
• Support Windows, Mac, Android, iOS and other platforms
• Money back guarantee in the first 30 days

2. NordVPN

Modern technologies are improving at tremendous speed, opening up an amazing breadth of new opportunities for us. Not long ago, Internet users began to use a private network - VPN. It allows you to create a secure connection between remote PCs, providing:

• anonymity of work on the World Wide Web;
• the ability to download applications when the IP address is located in a different regional zone;
• high safety of work in a corporate environment;
• high transfer speed without interruptions;
• the ability to create a channel protected from hackers.

Let's look at how to connect to the Internet via VPN on different OSes.

OS is more complicated previous versions. But setting up a connection via VPN turns out to be very simple. Follow the step by step instructions below.

Open Start. From the drop-down list, go to “Settings”. This subsection may be called "Options".

Where can I find “Options”?

When the window “ Windows Settings", you will see the item "Network and Internet". Open the content. There is a “VPN” item here. Make one click. Click "Add VPN connection". In the new window, set the following parameters in order:

• Windows (embedded);
• Business Communication;
• L2TP protocol;
• . The necessary information is specified in your agreement for the provision of Internet services.

Check that the fields are filled in correctly and click “Save”.

Setting up a VPN on Windows 7

Here the phasing has no fundamental distinctive features. The only difference is the location of the sections that interest us. Proceed to the "Control Panel".

Where is the Control Panel located?

We will need “Network and Internet”.

We need a control center. From here you can manage networks and access. You will need to configure the connection. This will be a new direction.

You will need an active “Connect to workplace” button. Go ahead. “Use my Internet connection” will appear at the top of the form. Let's make a selection. A form will appear where you enter in the stated sequence:

• Business Communication;
• Check the "Don't connect now" checkbox. You will be prompted to simultaneously check for future connections;
• move on.

On the page that opens, enter your username and password. This information is provided when signing an agreement for the provision of communication services. Place a marker in the box that asks you to remember your password. Next, a working connection will be displayed. The form can be closed.

While in Control Center, continue working with custom metrics. In the form, click on “Change adapter settings”. The active and passive connections will be highlighted. Click on the configured option and select Properties. This is done through the right key.

You will be on the General form. Here the address information regarding the VPN server is checked. Correct view: inter.net.

In the “Security” form, you also need to make certain settings. Put VPN type here. There is no need to register anything. It is enough to use the drop-down list. Select the item: L2TP/IPsec. In the “data encryption” line, enter: optional. Click OK.

Stay in the connections tab. Here you will need to create a shortcut for “Business Connection”.

When you see a message that an icon cannot be created in this folder, agree to move it to your desktop.

Go to the main screen. Here you will find the corresponding label. Double-click with the left mouse button. A window will appear where you should select “Connection”.

You can check this point by following this path:

• go to “Network and Internet”;
• specify the section you are interested in. This is the control center;
• you need to check the configured indicators. Go to the form where the adapter settings are changed;
• Before finding the information you are interested in, read the sections. You will need “Network Connections”;
• we require "Connection via local network»;
• go to “Properties”, open “Network” and select “TCP/IPv4”;
• click on “Properties”;
• clause on obtaining an IP address in an automatic way must be activated, click OK.

Now we can say with confidence that the connection to the VPN is complete.

How to connect a VPN on Windows XP

Getting started is exactly the same as in version 7 of the OS. After activating the creation of a connection, the Connection Wizard will automatically launch. With it you will resolve the issue faster and more conveniently. After following “Next”, find the second item. It will allow you to connect to the network on your desktop.

Keep tuning. You will see the “Connection name” window. Specify Business Connection. Proceed to the second stage.

Stop at “Select VPN Server”.

You will be taken to the last page of the wizard. Check the box where you are offered to display a shortcut on the desktop. Complete the procedure.

Confirming settings and creating a shortcut on the desktop

Click the right mouse button on the window that appears. Go to "Properties". In the first tab, check the VPN server address. It should be written here: inter.net. Go to "Options". Mark with the marker “Call back when connection is lost.” Then open “Security”. Remove the checkbox from “Data encryption required.”

The connection window appears. It asks for a username and password. Enter the information provided by your Internet service provider when completing the contract. Place a marker next to the prompt to save passwords. Start connecting.

As in the option discussed above, double-check that you received the IP address. It should be done automatically. This is done through Start. Find "Network and Internet Connections". From the suggested sub-items, select “Network connections”. Find “Local Area Connection”, right-click to get to Properties. Here you need to highlight TCP/IPv4. Then you need to go to Properties again. Now check for the checkbox next to the offer to register your IP address automatically.

Setting up mobile equipment on Android OS

If you need to set up a VPN on mobile devices, use the following step by step instructions. It will create a secure channel connecting separate networks and providing access to them for people who regularly change their location.

Important! For the setup to be successful, you need to know the address of the server to which you will connect, your login and password.

Open the Settings menu on your device.

In the column " Wireless network» Click on the “More” sub-item, select “VPN”.

Check the box to add a VPN connection. It may be called that or designated as “+”.

A form will open in front of you where you need to enter the settings:

• “Network name” - any name. You decide what name to give your new VPN connection;
• "Type" - "PPTP";
• “Address”—VPN server address;
• click on the “Save” button.

find out detailed instructions for settings home internet in the article -

When you first start, the system will ask for your username and password. To avoid entering them again next time, check the box next to the offer to remember user data.

The VPN connection is configured and ready to use. You will learn about this thanks to the corresponding notification. By clicking on the icon that appears, you will see detailed information by connection.