How to install mods in GTA 4. Correct installation of add-ons for GTA IV. Installing texture mods

Step 1.

First of all, you need to set up your operating system Windows.
The setup involves installing special software, without which script mods simply won’t work.

Step 2.

You need to install software for GTA IV. First of all, you need to decide on the patch you intend to play on.

Patches 1.0.4.0 or 1.0.0.4 will provide you with full support for most mods, ENB-Series and also better performance.
Patch 1.0.7.0 will allow you to play multiplayer with installed Simple Native Trainer (unrated game only, FreeMode)

1.0.0.4 (or 1.0.4.0 ):

Note: XliveLess, in addition to its role as an ASI loader, performs several other functions:
- moving game saves to the "My Documents" folder
- support for loading .asi mods from the plugins directory
- complete shutdown Games services For Windows Live

What needs to be installed for the patch 1.0.7.0

(in the archive, select the version for your patch)

And now directly about installing these components into the game and subsequent installation of mods:

Installation .NET ScriptHook:

1) Download the archive from the site
3) Copy files from the archive to root folder games.

Script mods with the extension .net.dll or .cs, etc. are installed in the folder scripts(located in the root folder of the game)

Installation ASI Loader:

1) Download the archive from the site
2) In the archive, select the version for your patch
3) Copy the file dsound.dll to the root folder of the game.

ASI mods are installed in the root folder of the game.

Installation XLiveLess:

1) Download the archive from the site
2) In the archive, select the version for your patch
3) Copy the xlive.dll file to the root folder of the game.

ASI mods are installed in the root folder of the game or in the plugins folder (if installed XLiveLess)

Installation File Check Fix:

1) Download the archive from the site
2) In the archive, select the version for your patch
3) Copy the file FileCheckFix.asi to the root folder of the game

Note: you must have an ASI bootloader installed.

If you have any questions or difficulties, you can always contact

GTA 4 has very good protection installed. You can't just install mods and patches. Well, GTA 4 gamers and programmers are not asleep either. What you need is to install a patch that will remove the protection once and for all. this can be easily dealt with.

And so, following these few points, you can install mods for GTA 4.

1.First you need to make sure that you have a “clean” GTA 4 installed, since Magic Patcher will not install if you have already changed and/or modified anything.
2. Run MagicIV.exe from the archive and place it in the folder with GTA 4.
3. In the program window, click Validate Files to have the program check the original files. If an error occurs. This means you need to return the original files, but if you did not save the original files, then you need to reinstall the game.
4. Click Apply Patch - after this all your files will be saved and the game’s checking of these files will be disabled.
5. Now you need to click Verify to make sure the game starts. If the game starts, everything is OK!
6. Now you can easily install mods for the game. But before you do that, there's one more thing you need to do. To do this, you need to find the Rockstar Games folder (where your game is installed, for example, C://Program Files/Rockstar Games/), then right-click on the folder, select “Properties” and where there is a checkmark for “Read Only”, check the box take it off. Click "Apply" and that's it!)
How to install mods for GTA 4?

Installing texture mods.

Mods for GTA 4 come in two different formats. Basically, all mods are files with the extensions .wtd and .wdr. They contain several models and textures.

Before installing mods, you will need Magic Patcher (how to use it is described above) At the moment, there are two programs for editing GTA 4 - and . IN in this case I'll use SparkIV. What program you need to install the mod is in the description of almost every mod on our site. The principle of installing mods via OpenIV is almost the same.

Download and unpack the archive with the mod. You will see several files (for example, we will use hair_002_u.wdr and hair_diff_002_a_uni.wtd). These are archives with models and textures that contain modified images.

Open SparkIV and click Open. Go to GTA IV\pc\models\cdimages\ and open the playerped.rpf file.

In this step, SparkIV will show a list of different files. All files have extensions .wdr and .wtd. They are 3D models and textures.

To install the modification for GTA 4, click Import in top menu and select all the files that were in the downloaded archive with the mod.

Once everything is imported, the modified files will turn blue (only in SparkIV, of course).

Click Save and close the program.

All! With these simple steps, the mod will be installed and you can launch GTA 4 to enjoy the mod you installed.

Installing mods for GTA 4

All mods of this type are installed in the same way - by replacing the old file with the mod you downloaded.

In this instruction I will use the “High City Density” mod. This mod makes the city maximum density

You need to install Magic Patcher.

Download and unpack the archive. You'll see that the data file it modifies is called popcycle.dat

Open the folder with installed GTA 4, and then \common\data.

Paste the downloaded popcycle.dat into the \common\data folder and agree to replace the file.

All! Following these instructions you will install any mod for a data file.

Let's get started with the task:

1) First, let's download the program through which the replacement will be made. (or ). Let's unpack it somewhere and run it.

3) Let's open it. Next, you need to find the files of the machine you want to replace. Just enter the name in the field Filter in the right top corner (turismo, for example). By the way, not necessary change Turismo to Turismo. In the event that the author of the mod suggests that you replace a model that you have already replaced, you can easily replace new model to any other standard game model. It must be one class of vehicle (two-door, with opening headlights, four-door, etc.).

4) Now you need to replace the found files (sometimes just one) with the ones you downloaded. Look into your archive and see what files are there.

We only have turismo.wft here (don’t confuse the extensions), which means we’ll only change that. This is done like this:

Click on turismo.wft in Spark"e;
- Click “Import”;
- In the window that appears, look for the file from the archive with the downloaded car;

Open it;
- Click “Rebuild” (a window will pop up);

We close the program, the car is installed in GTA 4.

5) In some cases, you will have to change colors and control settings using Notepad. This item is optional. And write it down general view a little complicated.. For GTA 4 Episodes from Liberty City, the settings files are encrypted. You can always replace them.

It should be noted that the files with which you work and in which car data is stored (handling.dat, carcols.dat) must have the “Read Only” attributes removed.

P.S. In a similar manner as described above, replacement is made weapons(weapons.img), clothes, textures and models characters(playerped.rpf).

If you still have any questions about installing cars and other mods in GTA 4, please. Questions in the comments are considered flooding and will be deleted.

Thanks for understanding!

III. How to add a car to GTA 4?

If you do not want to replace existing machines, but add new ones, then this instruction is for you. Of course, this is not an easy task, but it is worth it.

IV. How to replace clothes, etc.?

And to replace the pedal:
- "...\Rockstar Games\GTA IV\pc\models\cdimages\componentpeds.img"

V. How to replace sounds?

For cars:
- Export from "...pc/audio/sfx/streamed_vehicles.rpf" using SparkIV or OpenIV required file, for example, "MUSCLE_CAR_3.ivaud" and so on.

V. How to replace weapons?

Tell your friends!

GTA 4 amazes with its scope. But all good things come to an end: missions are completed, every corner of the city is explored, all cars are driven around. What to do? Is it time to delete the game?

Of course, you can uninstall and then install the fifth part of GTA. But there is another option: to diversify the gameplay with the help of various add-ons. To do this, you will need instructions on how to install mods on gta 4.

Preparation

The Rockstar Games studio does not particularly encourage user creativity, and therefore GTA 4 has a protection system installed that prohibits the installation of mods. But even in the strongest protection you can find a loophole.

The Magic Patcher program will help you overcome the security system.

All that remains is to find the “Rockstar Games” folder on your hard drive and uncheck the “Read Only” option in its properties. Now you can make any changes to games using pre-downloaded mods.

Installation

If you have already installed mods for GTA San Andreas, you should know that they come in two types: texture (resolution .wtd and .wdr) and file (.dat).

The installation process for GTA 4 is somewhat different, so we’ll look at them separately.

Texture mods

To install add-ons that change the texture, you need to download the SparkIV utility.

File mods

1. Download the archive with the add-on and extract the .dat file from it.
2. Open the game folder and then navigate to \common\data.
3. Copy the downloaded file with .dat resolution to the “data” folder, replacing the existing file.

If you know how to install mods for Skyrim, then you must have heard about the existence special utilities, designed to simplify the installation procedure for add-ons. Similar programs can be used for GTA 4. An example is Mod Installer, which allows you to automate the mod installation process.

Installing mods in gta 4