Download the program to restore your laptop to factory settings. An effective rollback to previous stability, or how to return a laptop to factory settings. How to recover data after restoring your computer to its original state

The average consumer is more predisposed to purchasing a portable computer equipment with a pre-installed operating system. And this choice is completely justified. After all, as a result, the user receives a ready-made technical solution. At the same time, the owner of a licensed OS is guaranteed to be protected from all kinds of computer troubles. In any case, a problem that often arises for novice users is: “How to return a laptop to factory settings?” resolved with just a few clicks. Read these few paragraphs. And you will understand how to make your laptop playful and pliable again. Recommendations and step by step instructions will make you confident user. You will learn where the OS backup is located and how to avoid sometimes unnecessary repair costs. In general, whoever doesn’t read it will probably regret it. Although what should someone who is ignorant be sad about?

Specific Introduction

You won’t believe it, but the manufacturer has provided in advance, in principle, a simple solution to the question “how to return a laptop to factory settings.” Again, everything you read applies exclusively to laptops with a pre-installed operating system. Windows system. Since there are a great many modifications of laptops, there is some difficulty in covering the restoration process for each individual “representative” of the compact computer industry. Nevertheless, the principle remains unchanged - a rollback to factory settings is possible in each individual laptop model. The algorithm of actions is almost identical. Therefore, read, analyze and start acting. Of course, if the situation requires it.

How to return a laptop to factory settings: step-by-step instructions

First of all, you should understand that the process of restoring the original operating parameters of a computer is a series of complex measures, among which there is a mandatory BIOS setup and rollback operating system to its original, so to speak, state. It is worth noting that the sequence of actions performed is critical. So keep that in mind.

Step No. 1: BIOS as a stability reporting point

To return your laptop to factory settings, you need to go into the BIOS and perform a reset. Manufacturers of portable computing electronics provide access to basic system input/output via special buttons. An individual brand often uses its own BIOS login scheme. Nevertheless, the Delete and F2 buttons are considered to be the most universal. And yet, don’t be lazy to turn over a few pages from the instruction manual supplied with the laptop...

• After you manage to enter the BIOS program, go to the EXIT section.
• In the window that opens, select Load Default Settings.
• Press the Enter button several times to confirm your changes.
• The computer will reboot and start working like new, that is, at factory settings.

Step No. 2: Activate the OS backup

Of course, the steps described above will solve the problem of “how to restore factory settings on a laptop,” but only partially. Since such an action will not restore the functionality of a “collapsed” system. Nevertheless, it all begins with the BIOS settings. So...

• There is a special partition on the hard drive (usually this area of ​​the drive is designated by the letter D) in which the original copy of the preinstalled system is stored. Typically, the manufacturer hides the Recovery folder from the user so as not to provoke the latter to rash actions (read: delete).
• In order to get a practical answer to the question: “How to return a laptop to factory settings?”, when directly booting the laptop, you need to press the corresponding button several times. Depending on the modification of the laptop computer, the meaning of this key may change. It is not uncommon for a manufacturer to equip a particular model with a separate button specifically for activating a proprietary tool, the functionality of which allows you to “roll back” the settings or return the system to its original state.

• Let's say the F9 key allowed you to enter a special service menu. Which, in fact, is only part of the answer to the question: “How to return a laptop to its factory state?”
• A list of OS recovery options will be displayed on the monitor screen, from which you should use the most suitable method. In the case where the laptop has a special service tool, the recovery process is almost identical to the above, but the interface shell still creates a pleasant operating comfort.

Step #3: Select wisely

You should not hope that a rollback to operating parameters (one of the control points in backups) with the ability to save data on HDD - this is a real way out of a difficult situation. Even in the case when the computer has not yet completely “gone crazy”, the total method will be more correct and reliable. That is, reinstalling the OS with the mandatory formatting process, which is provided by the specialists who installed it on your laptop Windows version.

In this case, with hard drive you need to copy important user data to removable media information, for example, a flash drive or external HDD. The final action and solution to the question “how to restore factory settings on a laptop” manipulation will be the activation of the Microsoft Diagnostics and Recovery item... or something similar (as a rule, the brand name is in the first place in the line). After a short period of time, your laptop will reach the “just off the assembly line” state.

In conclusion

It may turn out that at the time of demand the Recovery folder will be destroyed. In this case, you simply cannot do without a special service disk. If you have such a recovery tool, then you are in luck. Insert the disk into the drive and, following the service prompts, perform the appropriate operations.

So, you have learned how to restore your laptop to factory settings. However, the success of your further actions will depend on how correctly you can implement the described algorithm for returning to the initial state of the laptop. For the most part, laptops have, so to speak, individual recovery tools, the management of which does not seem difficult and comes down to a few clicks of the appropriate buttons. Let's finish here. Let your laptop always work great!

Computers love “cleanliness,” both on the hard drive and from dust on the hardware. If the second issue can be dealt with more simply - just clean it, then the first one is not so easy. The main problem for novice users is the desire to install more “useful” programs and the inability to use them correctly disk space computer, which entails problems in its operation. When the situation is at its peak, users have no choice but to perform a factory reset Windows settings. Our article will describe in detail how to restore the system to its “out of the box” form for different versions, starting with Windows 7.

What is a Windows factory reset?

Let's start with the fact that factory settings are the PC configuration that was installed initially and is the main one for this piece of equipment. All changes that were made by the user during use “disturb” the factory settings and the computer is no longer considered new. Reset to settings “out of the box” - transition to the original state, i.e. getting rid of user settings in general, and, in some cases, even from files and other data that remained after it.

It is recommended to perform a reset only when it is really necessary. Please note that if you have previously reinstalled Windows either yourself or using wizards computer systems, you may not be able to restore to factory settings. The whole point is that if reinstalled incorrectly (stupidly from one disc on which it was recorded) pirated copy Windows), a special recovery partition disappears on the hard drive, on which a copy of the installation version is stored.

This indicates that you cannot simply switch to factory settings - you will need the same distribution that was used initially, and not any other (even if the Windows versions are the same). Otherwise, you will not return the computer to its original form (in software terms) in any way. Therefore, treat reinstalling Windows more judiciously and seriously - if you use the services of wizards, ask them to reinstall Windows so that the recovery partition is not affected. If, nevertheless, the recovery partition was deleted, all you can do is install any convenient version Windows method a clean installation (with the removal of all data) and at least somehow create the appearance of a reset to factory settings.

How to reset Windows 7 to factory settings

Unfortunately, the "seven" does not support quick reset to factory settings, which is an obstacle to returning the computer to its original form without the use of additional knowledge. If you have the task of returning your computer to its original state, you can use the following options:

1. Through V "Additional download options";
2. Using your distribution that came with your PC or laptop.

If you are more inclined to the second option, then you just need to boot from the distribution and select system recovery there. Then everything will happen as usual.

In the case of the first option, you need to go to the menu "More download options". For most computers (laptops), this can be done by pressing the F8 key, which must be pressed immediately after the computer starts booting (without leaving standby or hibernation mode). When it is downloaded, you need to select "Troubleshooting your computer".

Next you will be taken to the window "System Recovery Options". It contains some features that can actually be used before loading the system as a whole. Among them, either a built-in reset or a proprietary one will be hidden. IN in this case, for example, we have the option of restoring the factory settings of a Toshiba laptop.

You will need to go to this item and follow the prompts of the built-in utility so that you can restore the factory settings. Please note that all files on your hard drive that you have used/saved will be permanently deleted.

How to reset Windows 8|8.1 to factory settings

In the case of Windows 8, things are more favorable. The system interface allows for the use of a built-in factory reset program directly from the “Control Panel”, as well as from the “Advanced Boot Options”. Let's look at this in more detail to improve understanding.

How to reset Windows 10 to factory settings

The “top ten” still has the same recovery functionality as in Windows 8, but to get there you need to go a slightly different path.

Subscribe:

The need to return factory settings to Android arises in several cases. Often the process is carried out before the device is sent to service center or immediately before selling the gadget. In this case, personal information is destroyed: photos, videos, messages, contact list.

By resetting the settings to factory default, you can solve a variety of operational problems. mobile devices. For example, this method is very helpful when the gadget freezes or turns off on its own, as well as if you have forgotten the code or graphic key security.

There are two methods that users use.

The first is software. It can only be done when the device is active and executing the given commands.

Second, the device does not boot. This is done using several buttons.

Using these two methods it is easy to return the gadget to its original form.

Instructions for returning Android to factory settings

Method 1. “Software method”

Open the "Settings" menu;

Select the line “Backup and reset”;

Click "Reset settings";

Please read the warning about deleting all settings.

Important! The gadget menu depends on the version of the operating system. Consequently, the path to these points may be different, but the procedure is almost identical and understandable at the level of intuition.

Method 2. “Hard reset”

When starting the gadget, press and hold the power button and volume for 2-3 seconds;

In the window that opens, find “wipe data/factory reset” (move through the menu with the volume button) and select;

Restoring a laptop to factory settings - useful feature, which will be very necessary in the event that Windows stops working correctly. In order not to reinstall the system again, it is very convenient to simply “roll back” to its original state, when the OS was still working properly. In this article, we will look in detail at how to return a laptop to factory settings and answer all related questions.

Resetting parameters can be used instead of resetting Windows installations

If you purchased a PC with Windows, then you need to understand that when you reinstall the system (and you will probably install a pirated version), a special section containing all the data necessary to return to factory settings will be deleted. Knowing about this very section, you can completely forget about reinstalling the system. Because it is much easier to take and reset the current state and parameters of the computer than to bother with reinstalling the OS.

All methods for resetting a PC differ depending on the manufacturer's brand. Let's look at the most popular brands on the market. Before you begin, you need to fully understand what will happen to your PC and its data after a rollback:

• All information located on the disk on which Windows is installed will be deleted. It is recommended to keep all data, files and programs on other logical drives. This will allow you to save your files after the system is restored.
• Will be produced full formatting system partition.
• The operating system will be restored from the image.
• Upon completion of the Windows installation, the installation of the necessary drivers and some system utilities that were originally on the laptop will begin.

After restoring your PC to factory settings, it will look like you just bought it. If you are happy with everything, then let’s move on directly to how this is done.

If you use an Asus brand computer, then it already has special utility, with which you can easily roll back your PC to its previous state.

The first thing to do is turn off Boot Booster mode through the BIOS. To enter the BIOS, press F2 while turning on the computer. Once you get into the BIOS, you can turn off fast boot mode in the “Boot” tab, just set “Disabled” next to the desired item. Save and exit. Next, restart your laptop and press F9 during startup. After this, a download window will appear in front of you. The system will ask you to confirm the operation and begin the rollback. When the operation is completed, the PC will reboot.

On HP laptops everything is done in a similar way. Press F11 while PC is starting. In the window that opens, select “System Restore”, there you can save the necessary data. Next, the reset procedure to factory settings will begin. As in the previous case, the PC will be rebooted and, after that, you will receive the computer in its original form.

For those who use Acer laptops, the scenario is as follows:

• While turning on the PC, press the F10 key several times in a row while holding Alt.
• Next, you will be asked for a password, the default value is: 000000.
• After entering the password, select “Factory Reset”.
• The recovery will start.

Also on Acer laptops there is special program eRecovery Management, which performs the same functions only through the OS interface.

Samsung laptops also have a corresponding utility called Samsung Recovery Solution. Or you can resort to the classic method. When turning on the PC, press F4 and select “Recovery”, then click “Full recovery” and “Factory settings”. Recovery will begin after you confirm the operation.

And finally, Toshiba laptops. The principle is similar to all those described above. Start the computer by holding down the 0 key. The system may require you to enter a username and password. In the menu that opens, select “Toshiba HDD Recovery Program”. You will need to click “Next” several times and confirm the operation.

Now you know how easy it is to restore your laptop to factory settings. Write in the comments whether this article was useful and how you dealt with resetting your computer yourself.

Resetting to factory settings can solve problems associated with OS instability or blocking by malware. However, you should remember that resetting the system will delete all personal data and programs you have installed. So before you start rolling back, copy everything important files, including browser settings and other programs, to an external drive, flash drive or CD. After reinstalling the system, you can return the necessary settings and data folders.

• Dell Inspiron – combination Ctrl+F11;
• Sony Vaio – F10 button;
• Rover – Alt button;
• Fujitsu Siemens – F8 button;
• Packard Bell – F10 button;
• LG – F11 button.

Never delete the Recovery partition of your hard drive to increase free space. This partition is responsible for system recovery, and if it is destroyed, you will have to install Windows from scratch. If the manufacturer included a Recovery disk with your computer, use it when booting the system to roll back to factory settings. As a rule, such disks provide the opportunity to choose an installation option with the creation of multiple partitions.