Why doesn't the mouse click on some objects? What to do if the mouse doesn't work? Troubleshooting mouse problems. The mouse does not respond to clicks: clogged

Sometimes users encounter a problem when the mouse does not respond to clicks. Why might this happen? How is it proposed to deal with the task? What features and nuances of the process are recommended to pay attention to? Sometimes factors that are not at all related to information can influence the mouse. Users can immediately take faulty equipment to system administrators for diagnosis. This is a logical decision, but there is no need to rush. You can independently figure out why the mouse does not always respond to clicks, and even cope with problems without outside help.

Garbage

The first and fairly common cause of the phenomenon under study may be simple clogging of equipment. If the mouse does not respond well to clicking or does it only once in a while, it is recommended to check its cleanliness.

Clogging can be eliminated only with new equipment. If the device has been working for some time, then if there are problems with the mouse, you can clean the component. It's not that hard to do. The result will not be long in coming - after the user removes all the dirt accumulated under the buttons, the mouse will work at full capacity.

Malfunction

But this is only one option for the development of events. In fact, there are a lot of possible scenarios. Mouse not responding to clicks? It is likely that the equipment is in faulty condition. Relevant for any devices - both new and those that have been working for some time.

It is recommended to take faulty equipment to a service center. There, the technicians will check the device and tell you whether it can be repaired. If yes, then you can leave the mouse at the service center until the problem is fixed. Otherwise, you will have to completely change the input device.

Functionality check

If a new mouse or a mouse that has already been cleaned of dirt and dust does not respond to clicks, you can check its functionality yourself. To do this, it is recommended to connect the device to another computer, install hardware drivers and make sure everything works.

This technique allows you to make visits to service centers with specific complaints. Also, with the help of such a check, you can often understand the sources of problems and failures. What other scenarios are possible? What should you pay attention to in this or that case?

Jacks and connectors

Mouse not responding to clicks? What to do? For starters, don't panic. This problem occurs among many users; often the source of the problem is a purely technical component; this does not pose any danger to the computer or operating system.

Alternatively, the cause of problems with the mouse may be a damaged connector. The socket to which the equipment is connected is damaged, as a result of which contact between the machine and the manipulator is established only once.

There is only one way out - connect the mouse to another socket. This is the only way to fix the problem. By the way, the connection connector on the device may also be damaged. In this situation, it is better to purchase a new mouse. After all, connectors are usually not repairable. Or after these manipulations they still break, and very quickly.

Drivers

What if the mouse does not respond to clicks or does it every once in a while? There are a lot of options for the development of events. It has already been said that often all problems are technical. But there are exceptions.

For example, the following layout is typical for gaming mice. It's all about the drivers. This software is responsible for recognizing devices in the operating system. An old version or the complete absence of these applications can lead to the fact that the mouse will not work at all. Or they will find themselves among equipment unknown to the computer.

In this case, you just need to install drivers on your computer (usually they are included with mice) or update existing ones. After this, the operating system reboots. Is there progress? Then you don't have to worry. The mouse still doesn't work fully? We need to look further for the source of the problem. There are still many alternatives.

Touchpad

Only laptop owners encounter this problem. Does the mouse not always respond to clicks or does not work at all, although there is a cursor? You can try to check the operation of the touchpad. If it functions normally, it is recommended to disable this component.

The thing is that some laptops and operating system builds do not support simultaneous operation of the touchpad and mouse. Therefore, a hardware conflict occurs. As a result, the mouse refuses to work normally.

As soon as the touchpad is disabled, the connected device will return to full functionality. And you can continue to use the mouse. By the way, you shouldn’t be surprised if the problem arose suddenly - no one is immune from this.

CPU

But if the mouse does not immediately respond to clicks, then the problem may be different. For example, slow response from information is sometimes due to high processor load.

Why does this phenomenon occur on computers? There are a lot of options. Among the most common are the following:

• a large number of functioning programs;
• the computer does not comply with the system requirements of the operating system;
• viruses;
• long-term operation of equipment without shutting down or rebooting;
• lack of hard disk space for normal operation of the OS.

In any case, you need to provide the processor with unloading. It is recommended to close numerous programs running in the background and restart the machine. It's better to give her a few hours to rest. Next, the user must resume trying to connect the mouse. The problem should go away.

Viruses

Mouse not responding to clicks? A virus, as already mentioned, is the real cause of a problem with equipment. Any computer “infection” can lead to this phenomenon.

What to do in this case? We need to try to cure the computer. If the problem occurs on a laptop, the touchpad will help. With it you can easily control your computer and cursor. The anti-virus system will find and disinfect potentially dangerous files. If this fails, the user will be prompted to delete the document.

As a rule, when the cursor cannot be controlled at all, the computer is taken to a service center. There, the system will quickly be cured of all viruses without causing any damage to the owner’s data.

Incompatibility

If the mouse does not respond to clicks, you should pay attention to the system requirements. The thing is that all modern equipment has certain demands on the computer. Non-compliance with this makes the device impossible to operate. Or it will function unstably.

When an incompatibility with the operating system is detected, you can solve the problem in several ways. Either the user changes the OS or the connected equipment. The second option is most often encountered in practice. It is recommended that Windows 10 owners pay special attention to compatibility issues. A lot of equipment conflicts with this operating system. Therefore, there is no need to be surprised that Windows does not respond to mouse clicks.

What to do in this situation? It has already been said: either change the connected equipment, or change the operating system. What exactly to do? Everyone decides for themselves.

Power supply

This is the last reason why the mouse connected to the computer is not responding. It's all the fault of the power settings. This problem most often occurs on laptops.

As practice shows, after this the mouse works better. It's actually not that difficult. It is enough to go through all possible options. This is the only way to understand 100% what’s going on. There is also no need to rush into purchasing new equipment. It is likely that you can do without it.

If the user doubts his abilities, he can take the computer along with the faulty equipment to a service center. They will quickly help you not only diagnose, but also fix any computer problem. What exactly to do? The final decision always remains with the user!

Good day.
While digging through various computer forums, you can often come across users whose mouse cursor has disappeared. This happens due to various reasons. To correct the situation, you must first understand the source of the problem. In this article I will try to talk about all possible options and ways to solve them.

This option should not be taken into account, since if the mouse does not respond to movements, the cursor simply will not move. A similar thing will happen as a result of failure of the port to which the connection is made.

You can solve the problem by connecting an external device to a different connector. If this doesn't help, try a new device. This way you can immediately rule out possible problems.

Virus( )

The first reason why the pointer disappeared is viruses. If some time before you visited unverified sites, downloaded some files, and even more so installed something, the first step is to check for malware using Comodo Internet Security or Dr Web Cureit. A clear sign is when the mouse loses control and it does something on its own.

The antivirus did not find anything - we move on.

Updates( )

A common cause on Windows 8 and 8.1 is the installation of system add-ons. The problem is that new components are corrupting some old files. As a result, certain elements of the operating system cease to perform their functions.

To solve the problem you need to perform a number of actions:

If at the end of the check it is indicated that the files were recovered, reboot and check the functionality of the component.

If some elements cannot be brought back to life, we run “ Upgrade Readiness Tool»:

As a result, everything should work.

Registry( )

Sometimes the problem appears in Windows 10. However, the previous tools do not help. To solve the problem, you need to make some changes to the system registry:

In many versions of Windows 10, this move helped.

Applications( )

If you suddenly notice a problem in games or after using some tools, this may be due to a conflict of individual elements. For example, such problems occur during the launch of Spin Tires and the game Port Royale 3. In addition, similar symptoms are often observed after chat, but this is most likely due to browser problems.

Often the problem is solved by restarting the operating system. What to do if this doesn't help? Most likely reinstalling the application itself will help.

If your mouse starts to work poorly, don’t rush
run to the store for a new one, and try to “cure” the old one.

First of all, make sure
that there are no problems with the mouse itself.

If wired, is the wire damaged?
If it’s wireless, isn’t it time for a battery?
change or fix the USB connector.

If this is all right, then connect to the Windows problem.

There are many ways to improve your mouse's performance on your computer.
Can configure mouse operation“to suit you” or change the signs.

And you can troubleshoot
or update the configuration.

In different Windows packages, the path to the mouse settings may differ.
In Windows 7 - as written below. In other Windows packages - maybe
be different. But mouse settings are a must.

The beginning of the path to elimination
problems, starts with the Start button.

In the right column of the Start button menu, if there is one,
select “Devices and Printers”.

A window will open containing all devices,
connected to your computer.

If there is no function in the right column of the Start menu
“Devices and Printers”, then click “Control Panel”.

And select in the “Hardware and Sound” section -
"View devices and printers" button.

Or you can click "Hardware and Sound"
and in the new “Devices and Printers” window.

In any of the options, a window will open
with connected devices (screenshot above).

To troubleshoot, click
by mouse file to highlight.

If there is no File button in Explorer, then right-click
mouse file key. A context menu will open.

And select “Troubleshooting” from the context menu.
Wait while the troubleshooter diagnoses the problem (this may take a few minutes), and then follow the instructions.

Although there may not be instructions.
If the problem is resolved without your participation.
An active “Finish” button will appear at the bottom of the window.
Press and for the mouse to work correctly,
reboot your computer.
All!

How to update your mouse configuration

If the troubleshooter doesn't help
problem with the mouse - you can update the configuration.

This can be done through Device Manager.
You can find it through the Start button.

Start → Control Panel → Hardware and Sound.

Under Devices and Printers, click Device Manager. A tab like this will open.

In this tab, find the mouse, right-click
mouse and select “Update hardware configuration”.
And the program will update.

And another problem happens with the mouse - the computer does not respond
on left mouse clicks. I myself recently encountered this phenomenon.
The mouse pointer moves around the screen, the left mouse clicks, but nothing opens. No windows, no Start - nothing. The right mouse opens the context menu, but the left mouse cannot open anything from this menu. Neither an emergency shutdown of the computer, nor all kinds of advice from the Internet (about the Enter key and the “hot keys” Ctrl + Alt + Del) helped solve the problem. At first I thought there was a problem with the computer, and then I connected another mouse. And after Windows installed the driver for this mouse, everything worked properly.

Greetings everyone!

Not long ago I observed a very interesting (even funny) picture: at work one guy, when his mouse stopped working, stood and didn’t know what to do - he didn’t even know how to turn off the PC... Meanwhile, I’ll tell you, many actions that users do with the mouse - can be easily and quickly done using the keyboard. I will even say more - the speed of work increases significantly!

By the way, I fixed the mouse for him quite quickly - and that’s how, in fact, the topic of this article was born. Here I want to give some tips on what you can try to restore the mouse’s functionality...

By the way, I will assume that your mouse does not work at all - i.e. The pointer doesn't even move. Thus, in each step I will provide the buttons that need to be pressed on the keyboard in order to perform this or that action.

Problem #1 - the mouse pointer does not move at all

This is probably the worst thing that could happen. Since some users simply weren’t prepared for this at all :). Many people don’t even know how to enter the control panel in this case, or start a movie or music. We'll deal with it in order.

1. Checking wires and connectors

The first thing I recommend doing is checking the wires and connectors. Wires are often chewed by pets (cats, for example, love to do this), accidentally bent, etc. Many mice, when you connect them to a computer, begin to glow (the LED lights up inside). Pay attention to this.

Also check the USB port. After you have corrected the wires, try restarting your computer. By the way, some PCs also have ports on the front side of the system unit and on the back - try connecting the mouse to other USB ports.

In general, basic truths that many people neglect...

2. Battery check

This applies to wireless mice. Try either changing the battery or charging it, then check again.

3. Troubleshoot mouse problems using the wizard built into Windows

Windows OS has a special wizard that is designed to find and automatically fix various problems with the mouse. If the mouse's LED lights up after connecting it to the PC, but it still doesn't work, then you need to try using this tool in Windows (before buying a new mouse :)).

1) First, open the execute line: press the buttons simultaneously Win+R(or button Win, if you have Windows 7).

2) In the execute line, write the command Control and press Enter.

3) Next, press the button several times TAB (on the left of the keyboard, next to Caps Lock). You can help yourself arrows . The task here is simple: you need to select the section “ Equipment and sound ". The screenshot below shows what the selected section looks like. After selection - just press the key Enter(this will open this section).

Control panel - equipment and sound.

5) Next using the buttons TAB and arrow highlight the mouse and then press the button combination Shift+F10 . Then you should see a properties window containing the coveted tab “ Troubleshooting "(see screenshot below). Actually, open it!

To open the same menu: select the mouse (TAB button), then press the Shift+F10 buttons.

By the way, after checking there may not be any instructions for you, but your problem will be fixed. Therefore, at the end of the check, click the finish button and restart your PC. Perhaps after a reboot everything will work...

4. Checking and updating the driver

It happens that Windows incorrectly detects the mouse and installs the “wrong driver” (or there was simply a driver conflict. By the way, before the mouse stopped working, did you not install any hardware? Perhaps you already know the answer?!) .

To determine if everything is ok with the driver, you need to open device Manager .

1) Press the buttons Win+R , then enter the command devmgmt.msc(screenshot below) and press Enter.

2) Must open "device Manager" . Pay attention to whether there are yellow exclamation marks next to various types of equipment (especially in front of the mouse).

3) To update the driver: just using arrow and TAB buttons highlight your device, then press the buttons Shift+F10- and select "update drivers"(screen below).

4) Next, select automatic update and wait for Windows to check and install the drivers. By the way, if the update does not help, try removing the device (and the driver along with it), and then installing it again.

You might find my article with the best auto-update programs useful:

5. Testing the mouse on another PC or laptop

The last thing I recommend in case of a similar problem is to check the mouse on another PC or laptop. If she doesn’t make money there, there’s a high probability that it’s the end for her. No, you can try to get into it with a soldering iron, but what is called “ game - not worth the candle«.

Problem No. 2 - the mouse pointer freezes, moves quickly or slowly, jerkily

It happens that the mouse pointer seems to freeze for a while, and then continues to move (sometimes it just moves jerkily). This can happen for several reasons:

• : in this case, as a rule, the computer slows down in general, many applications do not open, etc. I described how to deal with CPU load in this article: ;
• system interrupts“work”, disrupting the stability of the PC (more on this in the link above);
• problems with hard drive, CD/DVD drive- the computer cannot read the data in any way (I think many have noticed this, especially when you remove the problematic media - and the PC seems to hang down). I think many people will find this link about assessing the condition of their hard drive useful: ;
• some types of mice“require” special settings: for example, a gaming computer mouse http://price.ua/logitech/logitech_mx_master/catc288m1132289.html - may behave unstable if the checkbox is not unchecked increased pointer accuracy. In addition, you may need to install utilities included on the disk included with the mouse. (it’s better to install them all if problems are observed) . I also recommend going to the mouse settings and checking all the boxes.

How to check mouse settings?

Opening control Panel, then go to the section “ Equipment and sound". Then open the “Mouse” section (screen below).

• pointer speed: try changing it, often moving the mouse too fast will affect its accuracy;
• increased accuracy of pointer installation: Check or uncheck the box next to this item and check the mouse. Sometimes, this checkbox is a stumbling block;
• display mouse trail: If you enable this checkbox, you will see how the mouse movement leaves a trace on the screen. On the one hand, some users will even find it convenient (for example, you can find the pointer faster, or, if you are filming a video of the screen for someone, show how the pointer moves) , on the other hand, many people consider this setting to be the “brakes” of the mouse. In general, try it enable/disable.

Properties: Mouse

Also one more piece of advice. Sometimes the mouse connected to the USB port freezes. If you have PS/2 on your computer, then try using a small adapter and connecting USB to it.

Mouse adapter: usb->ps/2

Problem No. 3 - double (triple) click works (or 1 button does not work)

This problem most often appears in an old mouse that has already done a fair amount of work. And most often, I must note, this happens with the left mouse button - since the entire main load falls on it (even in games, even when working in Windows).

By the way, I already had a note on this topic on my blog, in which I advised how easy it is to get rid of this disease. We were talking about a simple method: swap the left and right buttons on the mouse. This is done quickly, especially if you have ever held a soldering iron in your hands before.

Changing right to left mouse buttons.

If you didn’t, there are two options: ask a neighbor or friend who does something like this; or go to the store for a new one...

By the way, as an option, you can disassemble the mouse button, then take out the copper plate, clean it and bend it. This is described in detail here (though the article is in English, but everything is clear from the pictures): http://www.overclockers.com/mouse-clicking-troubles-diy-repair/

PS

By the way, if your mouse periodically turns on and off (which, by the way, is also not uncommon) - 99% of the problem is in the wire, which periodically comes off and the connection is lost. Try securing it with tape (for example) - this way the mouse will serve you for many more years.

You can also get in with a soldering iron, having first cut off 5-10 cm of the wires in the “right” place (where the bend happened), but I won’t advise this, since for many users this procedure is more complicated than going to the store for a new mouse...