Asus password, how to find out the router password and how to reset it if you forgot. Resetting the Asus router: a detailed guide Restoring the asus rt n12 router

The instructions will tell you how to reboot a router from Asus, D-Link, NETGEAR, TP-Link, Zyxel, Huawei and others. Prepare the router, place it in a free, illuminated place and take a sharp object, such as a knitting needle. Routers from manufacturers D-Link, TP-Link, Asus, NETGEAR, Tenda, Zyxel, Huawei will be taken as the main examples. Make sure below that you really need to reboot and what you don’t need to do so that the router doesn’t turn into a brick or lose all your settings.

It should be noted right away that the procedure is similar for different companies, but do not confuse it. These two operations should not be confused.

Reason for reboot

For what reasons is overload required?

The router, regardless of the manufacturer, assumes long-term and uninterrupted operation. It does not require turning off in the evening or at night. Because of this, on some models the power button may be completely absent. This happened on the Asus RT-N13U B1 router. A reboot is most often necessary if you have changed settings and they need to take effect. In such a situation, the device itself offers to perform it.

Despite the declared uninterrupted operation, in practice it turns out that devices can freeze, and the connection to the network periodically disappears. Such problems are most typical for the budget line of routers. They are also available from the manufacturer Tp-Link. It is characterized by the disappearance of the Internet without visible reasons. The Asus RT-N13U B1 router model also encounters this problem. Those who use it say that they have to reboot several times a day.

Rebooting is the first and main recommendation that is given if problems arise with the operation of the router for no apparent reason.

Reboot by button or by disconnecting from the network

The first and easiest way to reboot is to turn off the power. For a reboot to take place, the power must be turned off for at least 30 seconds. It is recommended to keep the device turned off for 1-2 minutes. To turn off any router, simply unplug it from the socket.

The second option for this procedure is the button On/Off, which is available on select models. If your device has it, then turn it off using it and wait a couple of minutes. Then turn it back on.

There is a third option, it involves using the reset button. This button is recessed into the router body. To press it you need to use a sharp object. You should press it for 1-2 seconds and release. After this, an overload will occur. If you hold the button too long, the settings will be reset. For this reason this method use is not recommended.

Reboot via settings panel

Each user who independently configures the router becomes familiar with its parameters and capabilities. For this reason, he probably saw the Reboot button on the administration page. It can be used to restart the device. software. It's easy to launch. Initially, you need to log in to the administration page, then find the section with the button and click on it. This method is great for situations where the router is located far from the administrator, that is, there is no physical contact with the device.

If you are entering parameters for the first time or changing data on the router, then a reboot should only be done through the administration page. Pressing the power button or disconnecting from the power supply may cause errors and data may not be saved.

Sequence of actions

The first action that is performed, regardless of the router model, is authorization in the administration panel. This means that you need to connect to the device and go to the addresses 192.168.0.1 , or 192.168.1.1. A form will load where you must enter your login and password information. After this, the control panel will be available. If problems arise, read the article relevant to your router: address or how.

1. Router Tp-link. This brand of devices is very common among users. Their reboot button is hidden in the menu on the side. To go to it, you need to select in the left menu System Tools– After that, click on the link This is how the names of sections and buttons look in the Russian version. In case of use English firmware, you should find the section System Tools — Reboot and button Reboot. Tp-link router models support translation.
2. Asus router. This manufacturer took care of its users. Regardless of the firmware version, the reboot button is located in one place - on the main page. You should press it, confirm the action and wait the required time.
3. D-link router. If you have this device, then in the administration panel you should find a drop-down menu System. It will contain a point Reboot. The option of rebooting with saving is possible, then you should select Save and reboot.
4. NETGEAR router. If you have this device, then in the parameters you should find the item Advanced settings. On the left side there is a section Router status. Click on the button there

There are other router models, for example ZyXEL, Cisco, Tenda. In them, restart is also carried out by software. But they will not be described in this article. It should be noted that regardless of the manufacturer, if problems arise with the device, restarting it is performed by a simple operation - turning off the power supply.

Extreme methods of rebooting

If all the described actions are not suitable, then you can offer two more options - a special script or telnet. But these options are more suitable for experienced users or programmers. For a regular user, without specialized knowledge they should not be used.

You can reset settings on an Asus router yourself and do it in almost the same way as on other routers. But in Asus devices you need to know some subtleties in order to avoid new problems. The article reviews and instructs how to reset the configurations of ASUS routers, and also describes possible problems and their decisions.

Attention! A factory reset will delete all data about the router's previous configuration. Therefore, it is recommended to save the existing settings for reset and recovery. .

It is more convenient to reset settings on Asus routers through the web interface created by the manufacturer to manage the device. The modem connects both via a Wi-Fi network and via LAN. What needs to be done step by step:

After the reset, you should start changing the router settings.

Hardware reset to factory settings (Reset)

If you lose your login/password or lack access to the web interface for some reason, there is a chance to reset the parameters directly. To do this you need to turn reverse side frame. The Reset or Restore button – ASUS has a special icon – when pressed once, is responsible for turning Wi-Fi on/off. When pressed, it will reset the modem parameters to factory settings. Some Asus models have separate Reset and WPS buttons. To reset to factory settings, you must:

• Connect Asus to power; without it, the device will not be able to reset configurations.
• Press and hold Reset for 10-20 seconds until the WPS indicator on the front panel blinks. To clamp it, it is better to use a non-sharp object and press the button carefully. If the button fails, you will no longer be able to reset the configuration.

Asus will reboot, reset the password and login to the web interface and restore factory settings. This will take the modem half a minute or a minute. After you have managed to reset the settings, proceed to change the router configuration and set up your Internet connection.

Possible problems

Sometimes during the reset process problems occur. different problems that confuse the user:

Cannot open web interface page

If the user entered the IP address into the browser, and the page was unavailable, this is how you can solve this problem.

Connect to PC or laptop

Most people install a router in their apartment, and only then start thinking about how to configure it over the air. Which is not particularly correct. For convenience, it is easier to set up the router by connecting it to the computer directly, and after setting it up, place it where it is more convenient for you.
To make a connection, first turn on the router to the network, then insert the wire from the provider into a separate socket, the color of which is different from all the others (white, blue or another color, under this socket there should be an inscription in the form of an “e” sign with a rim). Take the wire that comes with the kit - a patch cord, and connect it to one of the 4 “LAN” sockets, connect the other end of this wire to network card. It needs to be inserted where the wire from the provider was connected. This completes the connection of the RT N12 D1 to the computer.

Resetting the RT N12 D1 router settings

Before you start setting up your router, I recommend using . Maybe you didn’t get a new router, or after checking it at the factory, they forgot to return the settings to the standard state. To reset the settings, you need to press the Reset button; for this you will need an object with which you can reach the button, for example, a match or a straightened paper clip. After pressing the button, hold it in this position for 10-12 seconds, or wait until all the lights on the front panel light up at the same time. And after that, wait until the router restarts completely.

Setting up the input on RT N12 D1

After the router connects you need. Login is performed as standard, as on all Asus routers. To get started, run . After this, write 192.168.1.1 in the address bar, login – admin, password – admin, and press Enter.

Once logged in you will see a page quick settings. To better understand the process, it is better to do everything yourself. By clicking on the button, which looks like a “house” and is located in top corner on the right, you will go to home page. For some firmwares, just click the "Next" button.

Setting up an Internet network on Asus RT N12 D1

First, set up your Internet connection. To do this, find an agreement with your provider, which specifies the settings and type of connection. If for some reason you cannot view these settings in the contract, please contact technical support your provider and ask them for these settings. After that, go to the “Internet” menu, located on the right side.

IP address, dynamic. Setting up for Rostelecom, Volya, TDK-Ural, Kyivstar

This type of connection is the simplest. To configure it, just select “Automatic IP” in the WAN connection type field. After this, be sure to put “Yes” in the “enable WAN” and “enable NAT” fields, you can also enable “UPnP” - so that there are no problems when working with file hosting services.

Some providers are bound to a specific MAC address, in which case it is worth specifying it. This address most likely belongs to the computer that was previously connected to the Internet. If you are setting up on the same computer, simply click on the “Clone MAC” button, followed by the “Accept” button.

Setting up a PPPoE connection for Rostelecom, TTK and Dom.ru

To begin, select the WAN connection type - “PPPoE”, also enable WAN, NAT and UPnP by checking the “Yes” field. The main thing is in the settings account, in the “Username” field, indicate your login, which you looked at in your contract or learned from the support service. And in the “Password” field, in the same way we enter the required value assigned to the login provided by the contract.

Similar to the Dynamic IP settings, some providers bind by “MAC” address. When performing setup on a computer that was previously connected to the Internet, simply use the “Copy MAC” button. If you are using another device, enter this address manually. When you have finished entering all the settings, click the “Apply” button.

Setting up RT N12 D1 with L2TP connection type and Beeline provider

To configure, if your provider is Beeline, you need to select the L2TP connection type. Then enable WAN, NAT and UPnP. The user name, in this situation, is the contract number, this is the same number to which you make Internet payments. Password – identical to the password from personal account. In paragraph " VPN connection» specify – tp.internet.beeline.ru. At the end, all you have to do is click “Apply”.

IPTV, setting up Asus RT N12 D1

IPTV settings in this router are incomplete due to new firmware. You can select the port through which the signal will be received. If your provider requires you to specify a “VLAN ID”, I will disappoint you, because this router does not have it, and therefore it is not suitable for you.
To select a port, go to " Local network" At this point, in the “Select IPTV-STB port” field, you will need to select the port to which you will subsequently connect the iptv set-top box. Finally, click the “Apply” button.

Setting up Wi-Fi Asus RT N12 D1

For Wi-Fi settings on this router model, you need to go to the “ Wireless network" In this tab, select “General” and enter some information there. SSDI is the name of your network, you can enter any name in Latin. “Authentication Method” - selects only WPA2-Personal, “WPA Pre-Shared Key” is , specify whichever you like, but not less than 8 characters and click “Accept”.

When you finish entering any settings, reboot your router. The button for this is located at the very top of the interface. The entire reboot procedure will last about 2-3 minutes. After this, the setup of Asus RT N12 D1 is completely finished.

That's all. I created a small manual on asus setup rt n12. Setting it up is not as difficult as it seems, you just need to set aside a few minutes of your personal time. And then, after all the steps taken, you can fully use the purchased router. I hope this information helps you in setting up asus rt n12.