How to enable wireless on msi laptop. How to turn on WiFi on laptops. Enable via Device Manager

Wifi turns on msi laptop cx500, cx620, cr650, ge70, u124dx, cx623, cr630, x370, ge620dx, cr500, cr61 according to a scheme illogical with all the others.

You don't need a lot of intelligence. Essentially, the process can be divided into two conventional stages.

The first step is to determine whether the msi wifi driver is installed on your laptop.

The second is to directly enable it using a keyboard shortcut and an additional button.

Specialist. the button to disable/enable wifi is not available on all msi laptops, so if one is not found, we simply skip this step.

Why does the manufacturer often install additional buttons. Wifi consumes a lot of power, so if you don’t use it, and it also runs on battery power, it’s advisable not to turn it on.

ATTENTION: if your Wi-Fi does not work, then the reasons and solutions for such problems.

How to check the presence of a wifi driver in an msi laptop

Please note that if there is no driver, then in the device manager there will be a line with yellow exclamation mark – unknown device.

How to turn on Wi-Fi on an MSI laptop using keys and buttons

If the manufacturer of msi laptops has provided a special feature to enable wifi. button, it is usually located near the power button.

Only since new models are constantly coming out can it be elsewhere. Therefore, carefully inspect the case - on the sides, front, near the keyboard.

It is not difficult to detect it - almost always an antenna is drawn on it directly or near it.

As for the keys, this is usually the combination - Fn + F11. Only if it doesn’t work, try other options with the F1……….F12 keys, while holding down the Fn key.

An antenna is also usually drawn on the key. That's all. Turned on wifi - great. No - we describe the problem in the comments. Good luck.

People all over the world purchase new models of computers or laptops every day for their personal use. But not all professional users know how to configure its operation, install various programs, connect your device to worldwide network Internet.

In this article we will try to consider step by step instructions how to turn on Wi-Fi on a laptop and on a computer. The principle is the same for all laptops; we will look at how to enable Wi-Fi on several of the most common laptop models, as well as separately on Windows. So. Everything is in order.

How to enable Wi-Fi on HP laptops

At the initial stage, you need to look at the current state of the connection to the laptop. wireless network. To do this, look at the icons; they may differ on some HP laptop models. The icon can be at the top of the panel (F12 key with an image of an antenna) or on the taskbar in the lower right corner. If you have an antenna icon and it lights up, then Wi-Fi is connected, if it doesn’t light up, it’s turned off. On some models there may be an “X” next to the “mast” icon. In this case, the connection is disabled.

Having decided on the Wi-Fi connection, if it works, then you can safely access the Internet, if not, then proceed to further actions.

How to enable Wi-Fi on Asus laptops

Specific control of the Wi-Fi module is distinctive feature this model. Basically, connection and disconnection occurs using a special mechanical switch. The switch is in active mode - Internet access is active, and if in inactive mode, it is turned off.

How to turn on Wi-Fi on Windows

Now let's look at how to access the Internet in Windows. There are several Windows varieties. You may have it installed on Windows laptop 7 or 8, Windows XP or Vista. We will focus on two: Windows 7 and Windows 8, since they are the most popular at the moment.

How to enable Wi-Fi on Windows 7

And so what you need to do to enable Wi-Fi on Windows 7:

The very first thing we need to do is go to the “Start” menu and select “Control Panel” there. Select the “Network and Internet” subsection in it. There are also several subsections here, but we need the “Network and Sharing Center” shared access" We find it and go in.
A separate window will open, where we find the “Change adapter settings” tab and click on it.
Another window opens. Find the shortcut "Wireless" network connection" Right-click on this shortcut and in the “connect/disconnect” command that appears.
A list of networks will open, where we select the one we need and click connect.

As a rule, the network is protected with a key, so another window will open where you will need to enter a password in a certain field.

If you did everything correctly, an icon will appear in the lower right corner of the desktop indicating that Internet access is active.

How to enable Wi-Fi on Windows 8

Turn on Wi-Fi on Windows 8:

As when connecting a network to Windows 7, initially we perform the same steps: “Start” -> “Control Panel”.
After we get to the above tab, select “switch to classic view” and find “Network Connection Control Center”. You will see a list of programs where we find “Wireless network connection”.
Next, using the right mouse button, click on the above program and select the “Property” command. In this folder there should be "Obtain an IP address automatically". If the mark is checked, then click the “OK” button.
Then we need to go back to the Network Connection Management folder. Here again we find “Wireless network connection” and again, using the right mouse button, select the command “Connect - Disconnect”.
After this, it will open before you additional window“Connect to a network”, where we select the network we need and click the “Connect” button.

If you did everything correctly, the corresponding icon will appear in the taskbar.

How to enable Wi-Fi on a desktop computer (PC)

And finally, let's look at how to personal computer you can connect Wi-Fi. There are no problems with laptops, they use a wireless connection, but with PCs it’s a little more difficult. Not everyone wants to run wires from their computer across the entire house or apartment. There is also a way out of this situation. You need to purchase and install a Wi-Fi adapter on your PC.

The computer uses the following types of adapters:

External. Such adapters are connected to a computer using a USB port.
Internal. This view is a little more complicated. They are connected to the motherboard via PCI-E 1X or PCI connectors.

Most people prefer external adapter. These are mainly people who rarely use local network. For them, the main thing is to have access to the Internet. There is nothing complicated about connecting it. We just need to plug it into a USB port and install the drivers. Each adapter comes with a driver disc. After installing the drivers, we search for a wireless network and connect to it.

There's a whole problem with the laptop. This fate has not passed for the owners of laptops from Acer. Many have already racked their brains, thinking about how to enable Wi-Fi on an Acer laptop. Especially if the transmitter is set to Off by default. It should be noted that the method depends on specific model devices. Unfortunately, there is no universal recipe. That is why all possible options should be considered in detail.

A little about Acer

This Philippine company appeared a long time ago and managed to win the sympathy of many PC and laptop users. Initially, the company specialized in the production of cheap components for American giants such as Intel and Apple. But over time, the company's management decided to compete with them. What can I say, the competitor turned out to be serious. Now a good part of the computer market belongs to Acer. Who would have thought?

A little history: Wi-Fi

Wi-Fi is a technology for transmitting data wirelessly. This is very convenient because it frees PC and laptop users from using outdated wires that always get tangled underfoot. Wi-Fi was first used in a production laptop in 2000. At that time this was very rare. And there wasn’t much point in having a transmitter in a laptop, since wireless points there was very little access. By 2002 the situation was changing. Wireless Internet has begun to gain popularity. Well, now you can see for yourself how it ended. None mobile device can't do without a Wi-Fi transmitter.

Wi-Fi standards

The most common Wi-Fi adapter standards are b, n, g And ac. The first three are no different from each other. But ac noticeably stands out in terms of data transfer speed. It is several times higher than that of standard b-, n-, g-adapters. Now many manufacturers install standard transmitters in their devices ac. Most common frequency Wi-Fi work- 2.4 GHz. Everything would be fine, but Bluetooth works at this frequency. As well as microwaves and much more. All this interferes with the purity of the channel. But Wi-Fi technology is gradually moving to the 5 GHz frequency. Nothing will interfere with the wireless Internet there. But we digress. How to enable Wi-Fi on an Acer laptop? Let's look at this topic step by step.

What should you do first?

In some cases, problems with the Wi-Fi transmitter have nothing to do with the laptop model. It's all about the inattention and carelessness of some users. The most common problem with Wi-Fi is the lack of installed drivers for the adapter. If this is the case, then there is no problem here. Just download necessary drivers from the manufacturer's official website and install them. The Acer page contains programs for any device. Therefore, this can not be considered a problem. It is very important to download the driver specifically for your laptop model. The point is that the universal software does not exist because the manufacturer installs various types and types of adapters for your devices. Therefore, you should not hope that a driver from Acer Ferrari will fit the Acer Aspire.

Let's move on

If after installation Wi-Fi drivers It still doesn’t start, so we continue to look for the problem. Models such as Acer 1000, 1690, 2012, 5610 have a dedicated power button. It can be located anywhere: on the side, behind, in front, above the keyboard. If Wi-Fi does not work on your Acer laptop, it makes sense to look for such a button.

The most interesting thing is that she can look like anything. Some models show an antenna on the button. If so, then finding the switch will not be difficult. But in most models there is a very ordinary key that you need to find and press. The buttons on some Acer laptop models have light indication, which is very convenient. There is no need to rack your brain over whether the transmitter is turned on or not.

If there is no button

It also happens that a physical switch (or is missing altogether. In this case, let's turn to the rich Key combinations can turn on and off the most different devices laptop. Only the specific combination depends on the model. If we are dealing with model range"Acer Aspire One", then to turn on Wi-Fi you need to use the Fn+F3 key combination. Most other Acer models use the Fn+F5 combination. If these combinations do not work, you need to try to find the desired combination using the “scientific poke” method.

It is also worth paying attention to the fact that different models display differently. It can be represented either by the letters themselves or by some incomprehensible symbol. If the Fn inscription is nowhere to be seen, feel free to press all the incomprehensible buttons. You still won’t be able to cause much harm to the system and laptop through your actions. As a result, the desired combination will be found. If the Acer laptop does not see Wi-Fi even after this, then move on to the next point.

If Wi-Fi still doesn't work...

In this case, let's turn to systemic ways turning on the adapter. In Windows 7 and 8, the icon with the image of the WLAN adapter is located in the system tray at the bottom, on the right side. You need to right-click on the image and select “Network and Sharing Center.” There we click on the item “Change adapter settings”. We look for the name of your WLAN device and right-click on it. In the menu that appears, click “Enable”. Then close all windows.

After all of the above has been done, click on the WLAN icon in the system tray with the left mouse button. Then select the name of your Wi-Fi network and enter the password to connect. After all these manipulations wireless access Internet connection should work. However, that's not all.

Additional software from the manufacturer

If Wi-Fi still does not “go up,” it means that your device is equipped with additional utilities that manage adapters. Acer (laptop) usually “hides” the programs used for this so that incompetent users do not mess with the settings. You should open Start, select All Programs and see if there is anything unusual with the Wi-Fi or WLAN sections. If available, then you should enable these utilities. Because without them work wireless adapter impossible. If all of the above did not help, then such a laptop is on its way to service center, since by all indications there is a problem in the adapter itself at the hardware level. But you did your best. Now let the experts figure out how to enable Wi-Fi on an Acer laptop.

Results

Now we can summarize. What was learned from our little educational program? Let's determine step by step the procedure for turning on the adapter in Acer laptops:

We check the availability of the necessary drivers.
If they are there, look for the hardware power button.
When it is not there, we select a key combination on the keyboard.
If this does not help, try to enable the adapter systemically.
Doesn't work? Looking for specialized programs from the developer.

Everything seems simple. Now you know what you need to do to provide yourself with wireless Internet access. And for many, information about what keys to turn on WiFi on a laptop will be very useful. After all, it can also be turned off in order to save battery power.

Conclusion

As an example, we considered devices from Acer. However, the algorithm of actions for laptops from other manufacturers is almost the same. There are only minor changes to the button placement. Thanks to this article, you can easily set up Wi-Fi on any device. Now you know how to turn on Wi-Fi on an Acer laptop. Go for it - and you will succeed.

Often, users who have purchased a laptop or netbook encounter difficulties when turning on and setting up wifi. The procedure itself is quite simple, but in some cases there are various snags and unforeseen difficulties, and sometimes it is also necessary configure the router Before you start, connect Wi-Fi to your laptop. In this article we will look at both the standard connection and options for solving such problems.
How to turn on wifi on a laptop
Usually, to turn on wifi, it is enough to perform 2-3 simple operations. Which ones exactly depend on the model and manufacturer of the laptop. Here are the options for enabling a wifi network on beeches from the most popular manufacturers:

On ASUS laptop you need to press the combination of the FN and F2 buttons.

On Acer and Packard bell, hold down the FN button and press F3 at the same time.

On HP laptops, wi-fi is activated by touch button with a symbolic image of an antenna, and on some models by the FN and F12 key combination. There are also models that have a regular button with an antenna design for this purpose.

For turning on wi-fi On Lenovo, hold FN and press F5. There are models that have a special connection switch for wireless networks.

On laptops from Samsung To turn on wi-fi, you need to hold down the FN button and press either F9 or F12, depending on the model.

For wi-fi connections on laptops various models and different manufacturers may use their own original key combination. Detailed description for a specific model, you need to look in the user manual that came with the laptop. The FN button is found on almost all models of modern laptops. With its help, you can connect various functions and connect the beech with other devices. If the laptop does not have an FN button, then a special button or switch is used to turn on the wireless network. As a rule, it is indicated by one of these drawings.

If you don't find it on the keyboard, examine the ends of the laptop; perhaps the switch is on the side. Also, take a close look at the bottom of your laptop. There are models in which the switch is located on the bottom cover. Moreover, manufacturers make this button barely noticeable. It practically merges with the body and may not be visible at first glance. It may be signed Wireles or Wlan. Have you turned on wifi using the required button or combination, but it doesn’t work? You should set up Wi-Fi on your laptop.
Example of a hidden WiFi switch

.

Attention: It is worth saying that such switches can be located in the most unexpected places, even on back cover laptop. So if your WiFi does not work, carefully inspect your laptop for a switch.
How to set up wifi on a Windows 7 laptop
Before setting up, you need to check the availability and connection of drivers. Checking drivers Checking the driver is to find out whether they are on your device at all and whether it is currently in use. So, in Control panels select an item device Manager, which can be hidden inside the item Equipment and sound.

A window opens in which we find Network adapters. There must be two items: Ethernet and Wi-Fi. One of them should have the word “Wireless” in its name. This is your adapter.

If there is no entry for the wi-fi adapter, or there is an icon with an exclamation mark on a yellow background next to it, this means that you have a problem with the drivers. If there is no entry, it means that the drivers are not installed and you will have to install them from the disk that came with the laptop. Or find it on the manufacturer's website. Without them, wi-fi will not work. If there is an entry, but there is a yellow exclamation mark next to it, right-click on this item. In the window that appears, select “Engage”. The reason for connection difficulties may lie in the fact that the adapter is set to a power saving mode. To disable it, right-click on it, then Properties - Power Management, now you need to uncheck the box “Allow the computer to turn off this device to save energy.”

Now everything is fine with the driver. Enabling the adapterwi- fi . To do this through Control Panel→ Network and Internet go to Network connections. Here we find Wireless network connection . This is it wifi adapter. Right-click to open the dialog box and select “Enable”. Connect to an access point. All that remains is to connect the laptop to the access point. Make sure the access point is active. Find the wi-fi icon in the lower right corner of the screen on the taskbar. When clicked, a network management window will open, select the desired network, click “Connection”.

If the network is protected by a password, the system will ask you to enter it (if you have forgotten the password for your network, you can find it in several ways). Only after entering the required password will you be able to use the Internet. If the network is open, the connection will occur automatically. That's it. Enabling and setting up Wifi on a laptop completed. If you have set up Wi-Fi once, you won’t need to do this anymore, since they will automatically be saved in the laptop’s memory. You will only need to turn it on with the appropriate button or key combination. Remember that connecting wirelessly takes a lot of power from your device, so the battery will be used quite intensively. Have a nice and simple connections no adventures!

Friends, you have a question: How do you turn on WIFI on your laptop? This question arises for many laptop users; it happens that turning on WIFI does not go so smoothly and creates a number of unforeseen problems. In this article we will look at the options turning on WIFI on different laptops.

See how to set up the Internet and set a WiFi password:

Usually, to turn on WIFI, you just need to press certain buttons on your laptop.

On a laptop ASUS you need to press the button FN and press the button F2.
On a laptop MSI WIFI turns on almost the same as on ASUS. Press and hold the button FN and press F10.
Now let's move on to laptops Acer And Packard Bell. While holding the button FN click F3, thereby turning on WIFI.
Most often on the manufacturer's laptop HP WIFI is turned on using touch button with a picture of an antenna. However, on some models of this manufacturer you need to hold FN and press the key F12. There are also models on which WIFI is turned on with a regular button with an image of an antenna.
On a laptop Lenovo hold down the button FN and press F5. However, there are models (for example Lenovo IdeaPad z570) with a switch located on the side of the housing.
On a laptop Samsung To turn on WIFI you need to hold down FN and press F9. On some models of this manufacturer, WIFI is turned on by holding down the keys FN And F12.

If your laptop has a button FN is missing, then only one specific button or switch is used to turn on WIFI. Finding this treasured button is not difficult; it will have one of the pictures presented below.

If there is no such button, examine the ends of the laptop and find a switch, which is also indicated by one of the images above or labeled Wireless or Wlan. Don't forget to look at the bottom of the laptop; some manufacturers hide the switch so that it becomes invisible and merges with the laptop body.

If the activation went smoothly, you can proceed to the process of connecting to WIFI.

WIFI does not turn on on laptop

It is not always possible to turn on WIFI using buttons or a switch. It is possible that when you press the power button, the wireless network will not work. The reason is that the laptop's wireless network adapter is disabled in the manager Windows devices. To enable it, go to Desk, then hover your mouse over the icon My computer and press the right button, then click on menu Properties, then on device Manager.

Or go to the menu Start and point the arrow to My computer. Press the right mouse button and click on device Manager.

The image below shows device Manager with all devices installed on the computer. You need to find an item Network adapters and press the small triangle on the left. All will open network devices, which relate to WiFi and the Internet, among them there will be a laptop adapter - you need to use it (turn it on). The name of your adapter may not match the name in the picture, since the adapter depends on the laptop model.

As you already noticed in the picture below, the top arrow points to the WIFI adapter. In my case, the adapter is installed on the laptop Atheros AR 9285 Warelles Network Adapter. If you do not have such lines in the device names from the section Network Adapters, then look for devices with the presence of words Wirelles, Wlan or WiFi. Most often, these words appear in the name of wireless devices, which is what you need to enable.

To turn it on, move the mouse arrow over the wireless device and right-click, then click on the menu item Engage, thereby enabling WiFi on your laptop.

You may need to install a driver. Installing the driver for WIFI adapter will be needed if you open the tab Network adapters and find an unknown device with a yellow triangle there. In this case, without installing the driver WiFi network won't work.