How to hide broken glass on your phone. How to remove scratches from a smartphone screen at home. Application of car polishes

A modern smartphone is a fragile thing, especially its screen. The tempered glass that covers the displays for protection is almost resistant to scratches and light impacts somewhere in the middle. But from landings on a hard surface, and even if the smartphone hits the corner or edge of the screen, it’s easy to break it. Sometimes only the glass cracks, while the display itself continues to show the picture normally, and sometimes the image disappears. In some cases, the sensor remains in working condition, and in others, it stops responding to the finger.

There are several options for damage, and what to do if you break your smartphone screen depends on the type and scale of the damage. Therefore, let’s try to figure out what’s what and draw up a further course of action. It should be noted right away: if certain areas of the display do not work, there is no need to try to make it respond to your fingers by increasing the pressing force. After all, you can cut yourself on a chip or drive small pieces of glass into your skin.

What to do if the screen and sensor are working

If you break your smartphone screen, but it continues to show the picture, and the sensor responds to your fingers, there are two options. If the device does not have an air gap between the screen and the sensor, then only the glass is damaged, but the touchscreen remains intact. This design is found in almost all smartphones that cost more than $160-200, for example, in the iPhone. The second option is when there is an air gap. Then the sensor can be considered broken, but only its glass base is damaged, and the invisible sensor layer of conductors remains intact.

In the first case, the problem is eliminated by re-gluing the glass to a new one. You can’t do this on your own, as you need to disassemble the phone and heat it in special installation to remove broken glass from the screen. Not all services carry out this procedure (an experienced specialist is needed here), but if you find a specialist, you can save money. The cost of repairs usually ranges from $15 to $100 (depending on the smartphone, as well as your country and city). The savings can be significant, because the original display for the same iPhone 6 with a replacement service can cost up to $150, and the glass itself can cost only $50. Therefore, if you break the glass on the screen of a new smartphone, but everything works, but the technician still talks about mandatory replacement for about $200 - you can try to find another technician who will only replace the broken glass. True, this is not always possible.

If the display has an air gap (in this case, when you press near a crack, the glass bends), then the sensor will have to be replaced. However, this is already easier; many more craftsmen are capable of doing normal repairs. Touchscreen replacement price for a very popular or budget smartphone– from 10 to 30 $, plus the cost of work (for example, in Ukraine – from 150 to 500 UAH, in Russia – from 1000 rubles). But for a rare model (for which spare parts are not mass produced) it may turn out to be twice as expensive.

What to do if you break the screen and it doesn’t work

If you break the screen and after that it either does not show (dark spots or areas filled with multi-colored patterns have appeared) or does not respond to your finger - everything is more complicated. For models without an air gap under the sensor, the entire display assembly will have to be replaced. The price of the issue depends on the model. For example, if you broke your iPhone 5S, you need to prepare to shell out about 30-50 dollars (the original screen is 1.5-2 times more expensive than a copy). On Xiaomi Redmi Note 2 or Meizu M3 repair costs from 25 to 60 dollars (also depends on whether the part is original or a copy), and on Samsung Galaxy S7 Edge – and all 300.

For smartphones with an air gap under the touchscreen (and this is the majority of Chinese-made devices, priced less than $120-130, and some models are more expensive), you can only replace the part that does not work. The price of the issue depends on the quality of the screen that happened to be broken and the complexity of the work. The replacement screen alone will cost between $25 and $50, and the sensor alone will cost slightly less. The popularity of the device also matters: for example, on the GSmart Mika M2, which cost about $100, the price of the assembled screen is about $50, and on the Xiaomi Redmi Note 3 Pro for $150 – from $20 (excluding the work of the technician).

Due to the wide range of prices in different workshops and service centers, if you break your phone, we recommend that you Google adequate prices before going to the repairman. You can do this simply by requesting something like “replacement/repair/price of screen [your smartphone model].” By comparing the offers of several services, you can determine where they really call you favorable price services, and where - they just want to make good money on a girl who is not familiar with the intricacies of electronics repair and who accidentally broke her smartphone.

You will also like:

What is RAM in a smartphone and how much is needed in 2017
Why does a smartphone heat up: 7 popular reasons

Undoubted convenience tablet computer or modern smartphone consists of a touch screen - it is very easy to work with. But this is overshadowed by unsightly cracks on its surface. Damage can be prevented if a special protective film is applied to the device immediately after purchase, but it has a detrimental effect on the sensitivity of the touchscreen. It’s worth taking a closer look at how to get rid of scratches on the screen of a phone, tablet or any other touch device.

Professional products

Pastes and liquids, created specifically for removing damage from glass surfaces, contain aggressive components that help achieve good results, without damaging the device itself.

Often, to use professional-grade products, you need a special napkin or cotton pad, which will make it much easier to apply the composition. Sometimes these devices are included with the drug. You can properly polish your iPhone and any other devices with products from stores.

GOI paste

The choice of display polishing is directly dependent on the depth and intensity of the damage. Some people, trying to find a way to remove scratches from their phone, immediately remember the well-known GOI paste. In it, the role of an abrasive is assigned to a special powder based on chromium oxide, and the paste itself comes in several varieties. To remove scratches from a smartphone sensor, an option that has a minimal abrasive effect is suitable. Before processing, it is necessary to protect the sides of the device with tape so that the composition does not penetrate into the holes and cracks. Paste can be produced in different forms, which are determined by the method of use:

Displex paste

This tool is more effective and modern. Displex paste was created specifically for touch screens.

It is produced in the form of small tubes, which are very convenient to apply the mixture to the surface due to the presence of a pointed spout.

To get rid of scratches, you will need a light-colored and fairly soft cloth. Color is important because when polishing the fabric will definitely become darker, which will provide control of the result.

After finishing the procedure, carefully wipe the glass surface with a cloth and check its condition.

Using this method, you can also clean the glass of the built-in camera to take the highest quality photographs.

Cost of special compounds

If there are scratches on a mobile gadget, users pay attention not only to the effectiveness of the drug, but also to its price. Hide defects and improve appearance favorite device, you can affordable price. For example, GOI paste can be bought for 70 rubles for a 45-gram container. This volume should be enough for a long time. The foreign composition is slightly more expensive - at a cost of 200-400 rubles you will buy a small tube of 4-6 grams. Special medications can also be purchased on the Internet, but it is advisable to first study reviews about them and delivery conditions.

Folk remedies

When thinking about how to get rid of scratches on your phone with home remedies, you need to understand the risks. Owners of mobile devices who decide to polish scratches on them often encounter insufficient effectiveness of the home remedy they use.

They try to improve the condition of the touch glass using a variety of methods, for example, by making a mixture of water and baby powder. The effect of such tricks is directly dependent on the depth of the defects.

Before how to remove a crack from the screen phone using folk remedies, the device needs to be prepared:

1. Turn off the gadget.
2. Seal all external openings and connectors with electrical tape or double tape. They will not allow the product and water to penetrate inside.
3. Please be patient as some defects will be very difficult to remove. This may require not even minutes, but hours of careful processing.

Toothpaste

To remove scratches using this affordable tool, you can use the following algorithm:

Baking soda

At home, especially noteworthy are those methods that have been known since childhood. For example, you can lighten dishes using ordinary baking soda.

Step by step guide:

Car polishes

Preparations designed for treating motor vehicles can also help deal with scratches. For example, a car polish will help you effectively cope with this task.

Extreme caution should be exercised when doing this, as these formulations are not intended for mobile displays.

It is worth noting that there are also special polishes designed for mobile screens.

Vegetable oil

It must be said right away that the oily structure cannot get rid of serious defects, but it can significantly improve the appearance of a phone or tablet computer.

The procedure is as follows:

All the methods mentioned above are publicly available and allow you to quickly and efficiently get rid of mobile device from minor scratches.

Attention, TODAY only!

Many of us have encountered a situation where one clumsy movement resulted in a crack appearing on the screen of your phone. Luckily, there is a quick and easy way to stop a crack on your phone screen from getting bigger. It is best to use materials for this purpose that you probably have at home, or even among what you carry with you every day, in your bag.

Of course, it is best to avoid falls altogether or use a shockproof bumper case for your phone. This will help you avoid many unpleasant situations with damage to the glass or case of your smartphone. However, what to do if a crack does appear? How to prevent further cracking of the touchscreen?

The magic ingredient to stop cracking small screen, is a cyanoacrylate. Cyanoacrylate is a fast-acting adhesive that forms strong, transparent bonds with glass and plastics. It can be found in super glue, nail glue and clear nail polish. Once you find anything from this list, stopping the crack on your phone screen from spreading will be easy:

• Wipe the surface of your smartphone from dust or debris, being careful not to press too hard and make the crack larger
• Apply a small amount of super glue to a toothpick or any other object that has a sharp tip. With a light touch, gently apply it to the crack
• Tilt the phone in different directions to help the glue penetrate deeper into the crack. Then remove excess using paper towel or cloth
• Let the glue dry completely before using the phone again

Fixing a cracked phone screen using cyanoacrylate is not ideal solution. The method is less effective for significant damage, and the repair is likely to be noticeable even on a small crack. There is also a very real opportunity that attempting any home repairs will void your warranty. However, if you are looking quick solution, this is a great way to slow down the spread of screen cracks and extend the life of your phone.

Alternatively, you can consider having your screen replaced at a service center. And sometimes it's better to just admit defeat and move on. For many, a cracked screen on an old phone is a clear sign that it's time for something new. You can sell your old phone, even if it has a cracked screen. The proceeds will make the purchase of a new smartphone less burdensome for your budget.

Additional materials:

• If you've already seen the iPhone X, you might be thinking, "I want those rounded corners." Consider yourself lucky because a small app called Roundr can create rounded corners on your screen...
• So you've installed Pokémon Go. You've logged in and created your avatar, you've even chosen your starter Pokemon. Now it's time to go hunting. Be sure to keep a close eye on the battery...
• What can you do with your old phone? Let's list best ways reuse old Android phone, which will give it a new life as a useful gadget. Today, the smartphone rating contains many powerful...
• All this time, you probably thought you were just unlucky when you dropped your phone and it landed face down, damaging the screen, forcing you to spend a lot of money on repairs.…
• Every mobile phone has its own Mobile Equipment Identity (IMEI) number that identifies your phone. If your phone is stolen, you can call your mobile provider and blacklist the device...

New technologies require a new approach to handling and solving problems. Thus, a common problem for users of modern gadgets is removing scratches from touch screen. There are many ways, everyone chooses their own.

The simplest, but not the most common, is to contact service center. Its big disadvantage is its high cost. Self-removal is much cheaper, but more time consuming. The main options for fighting, tested by many, are described below.

Scratch removal methods

In general, there are many options to return the device to a “new” look. But it is worth noting that they all have their drawbacks.

Let's look at the most popular ones, many of them are ineffective, some are harmful.

Attention! All methods are carried out with the device turned off.

Abrasives

This method is very popular and effective. But it is relatively expensive, and special paste is difficult to find in small cities. Unless you order through online stores.

Attention! There is a high probability of damage to the screen until it is subsequently replaced.

There are two suitable types of abrasive:

• Special paste from DISPLEX. It is sold in mobile accessory stores. Its cost is about 7 dollars;

Principle and procedure:

1. in order to protect the case from damage, take masking tape and cover it;
2. prepare the paste and apply it to the front surface;
3. using a soft cloth, rub the paste in a circular motion until visible damage disappears;
4. wipe off the product and use the “new” gadget.

Many Furum residents speak negatively about this method. In the best case, a smoother surface is noted. More suitable for removing abrasion rather than damage.

Video: Replacing glass

Chemical mixtures

There is an opinion that using chemical liquids can get rid of scratches. In fact, such an opinion is justified when the owner sees cloudiness, slight roughness or non-functioning of the device, then no one will remember about the scratch. That is, if nothing changes as a result, this is the best that could happen.

However, suitable means:

• acetone;
• dichloroethane;
• nail polish remover.

Algorithm of actions:

1. turn off the gadget;
2. apply a little product to a soft cloth;
3. rub the damaged area;
4. dry;
5. turn on the device.

Important! The material of touch screens is different for each model, so the results may vary.

Car polish

All the products that are used to remove scratches on a car can also be used on a gadget.

The most popular among them is car polish. They can minimize surface damage.

Photo: car scratch remover

Algorithm of actions:

1. purchase car polish;
2. apply the product to a napkin or soft cloth;
3. rub the damage;
4. Sometimes it takes more than 30 minutes to take effect.

Attention! When polishing, do not press hard on the screen, it may be damaged. All movements should be light.

Opinion of forum members:

• removes only very light damage;
• You should not choose a car polish from cheap manufacturers.

Sandpaper

Risky, unexpected, but cheap way. It is necessary to act very easily, gently and carefully.

The sandpaper should be the finest sandpaper you can find.

Procedure:

1. take sandpaper;
2. Rub the uneven area with light movements;
3. take a soft cloth and wipe off the fine dust resulting from the work.

Attention! For greater safety, it is better to use hard fabric, such as an overcoat.

Due to the high risk, it is better to practice on an old model that you don’t mind.

Baking soda

The most popular method due to its accessibility. It is better to choose the smallest soda.

Here's how to use this method:

1. mix a little soda with water in a 2:1 ratio;
2. stir until a thick, uniform paste is formed;
3. cover the edges of the gadget with adhesive tape;
4. Apply the paste to a soft napkin or cloth;
5. rub in a circular motion until the scratch disappears;
6. remove remaining paste using a clean napkin;
7. remove the adhesive tape.

Likewise, you can use baby powder instead of baking soda. The effect is approximately the same, more reminiscent of polishing.

Vegetable oil

Can be used to solve minor temporary problems associated with screen wear. It is better to choose refined oil, as transparent as possible.

Sequence of actions:

1. take one drop of oil;
2. drop onto a soft cloth;
3. Polish the monitor dry.

Protective film

Ideally protective film Best to use before damage. Then it will be enough just to change the film and that’s it. But if you glue the film after, it can smooth out the unevenness.

What if you apply it after polishing the screen? in a safe way then the effect will be quite high.

Do the following:

1. wipe the front surface with a soft cloth and polish;
2. dry the surface with a clean and dry cloth;
3. slowly glue the film, paying special attention to the positioning of the protective element on uneven surfaces;
4. in cracks you need to literally rub the film in to prevent air bubbles from appearing there.

This method is quite effective and is gaining popularity among adequate and reasonable people.

How to remove scratches from your touch screen with toothpaste

Many owners with damaged screens are trying this method. He is the most controversial and at the same time popular. That's why we took it out separately.

To begin with, let us note, apply this method rational only for minor defects. Removing scratches from the touch screen if they are deep will only worsen the result. There is a high probability of worsening damage, up to the loss of functions of the gadget.

Pay attention! Toothpaste should be baby or clear. Do not use bleach as it contains a lot of abrasives.

You will need:

1. damaged device;
2. toothpaste;
3. cotton swabs;
4. masking tape;
5. napkins.

Sequence of actions:

The damage should disappear or become less noticeable. Don’t think that the harder you press and rub, the better the effect. Strong pressure may completely damage the device.

Replacing the touchpad

To get an absolutely smooth surface of the touchscreen, it is best to take it to a service center to replace the “glass.” This option is not cheap, and not every city has such repairmen.

Can be found on the Internet touchpad and replace it yourself.

Carefully choose a touchscreen not only based on the model of your gadget. Check that the diagonal and the inscription on the cable match. This is due to the difference between Chinese manufacturers.

What you will need:

Procedure:

If you doubt that you will succeed, then it is still better to turn to specialists. The entire procedure takes an hour or two, but beginners need much more time.

All methods of dealing with scratches do not guarantee their complete disappearance. However, the individuality of the situation matters.

The best option is still to contact a service center, they have the appropriate tools and more experience.

When fighting on your own, remember that all movements must be careful and it is very easy to damage the matrix.

After removing the damage or replacing the sensor, we highly recommend installing a protective film and using covers so that you don’t have to suffer any more.

Let your gadgets perform all their functions.