How to make cable TV. What is cable television? Setting up TV without an antenna

Instructions

First, purchase a TV tuner and set-top box. They have two types of signal: digital and analog, which are played through Windows Media Center and become analog only.

First, connect the TV tuner and set-top box via the network, since all signal sources must have power. Install a voltage rectifier to eliminate power outages. Also install an APS station to prevent emergency shutdown, as this will damage the settings.

Connect from a TV tuner or set-top box to a personal computer running Windows Media Center. When laying the cable, pay attention to its location. Place it in such a way as to avoid damage. If you have several computers on which you want to watch television, then you need to connect a TV tuner and set-top box to each one.

Now connect the infrared transmitter that comes with the TV tuner to the set-top box and to the computer. It also has a remote control. The transmitter will automatically install the necessary drivers. For full operation, restart your personal computer.

Go to Start and select Run. Next, find the “TV Signal Settings” command and program the system for various channels. You will be able to adjust the clarity of the “caught” channel and sound quality. You can also save all channels in memory under digital values ​​convenient for you.

Video on the topic

“Peeking into the TV box” has already become firmly established in the everyday life of those who like to look into the TV box. It replaced the broadcast one, at one point making bulky and clumsy television antennas unnecessary. How to open your own cable TV?

Instructions

Realistically evaluate the prospects for opening cable television in your locality. If this is a small city, then, on the one hand, there will be practically no competition, but on the other hand, the number of subscribers may be small, which will not cover all opening costs.

Immediately calculate the approximate subscription fee, taking into account the cable stretch from the distribution center to the place of residence of the average subscriber. This distance should not exceed 4 kilometers.

Draw up a competent business plan and attract investors to your project. But choose your investors with some caution. If you want to manage the enterprise yourself, and not let everything go by handing it over to them. Typically, such a business reaches the break-even point within 5-7 months, and building a network will take at least 3 months.

Register a legal entity with the tax authorities, receive statistics codes and an extract from the Unified State Register of Legal Entities. Open bank accounts.

Enter into an agreement with a relay center in your city in case of satellite communications failure (anything can happen). Sign an agreement with RAO UES.

Find space for an office and editing room. It is better to rent office space in the center. Purchase all necessary equipment and tools.

Interview applicants for positions of office workers, managers and installers. When hiring installers, be sure to ask them to take a short theory test.

Every user can broadcast video to the Internet. To do this, it is enough to have a special video camera, a stable Internet connection and some programs. The broadcast can be seen by a huge number of people.

Instructions

Download and install the special WebCamPlus program from the official website http://webcam.akcentplus.ru/. Check the functionality of the webcam and microphone, then launch the program and create your own video broadcast, the image of which can be placed on your website or blog. Using this program, it is most convenient to set up continuous broadcasts from stationary web cameras.

Open the website of the mail service Mail.Ru and create an electronic mailbox on it. Before clicking on the “Register” button, check the box next to the “Create My World” line. After this, open your page on the “My World” social network. To start the broadcast, click on the “Video” link, and on the next page that opens, click on the “Create video broadcast” link. After this, the broadcast page will open, where you will be asked to check the functionality of the equipment. Make sure your webcam is working properly, then click “Start Broadcast”. To show the broadcast video to your friends, copy the link that is located under the video and send it to your website, blog, or to individual users using instant messaging programs.

Open the video hosting site Smotri.com. To be able to broadcast your own video, create an account on this site. After that, go to smotri.com using your account. A “Create broadcast” link will appear on the main page. Click on it and then select the type of future broadcast. The broadcast can be temporary, that is, after its completion, the video recording will not be saved, or permanent, the archive of which will be stored on the server. Make a choice, activate your webcam and microphone and start broadcasting on your own Internet channel.

Sometimes when creating a website you want to be able to watch TV shows directly on your website. Nothing is impossible for the Internet, and installing TV on a website is quite possible.

Instructions

Go to the website http://pro-tv.net, which presents more than 1000 Internet and TV channels - domestic and foreign. Register on the site, log in with your username and select the channel you need by clicking on the green icon. For ease of searching, all channels are divided into categories and broadcasts.

Before choosing this or that channel, look at the speed of its broadcast (usually from 100 to 5000 kbps, it is indicated next to the channel name). Compare it with the maximum speed provided by your Internet provider. You can check it directly on the website http://pro-tv.net. If there are any problems connecting channels, you can immediately contact technical support, or you can try to fix the situation yourself.

Reload the page and wait 15-30 seconds for the broadcast to start. If it still doesn’t start, check if all players and plugins are installed. Windows users will need Windows Media Player (can be installed from http://windows.microsoft.com/ru-RU/windows/downloads/windows-media-player), latest version of Adobe Flash (http://get.adobe.com/ flashplayer), TVU Network (http://dl.tvunetworks.com/PluginInstaller.exe), VLC for Windows (http://www.videolan.org/vlc).

To install the channels you select on your website, use the following code: iframe src=http://out.pro-tv.net/outside.html width=”730” height=”800” bgcolor=”#000000” scrolling=”auto ” frameborder=”0” allowtransparency=”true” allowFullScreen=”true” allowScriptAccess=”always”>

You can also go to a site such as http://kinonabis.ru. Select the “TV online” section in the menu on the left, select a channel and click the “Add TV channel to your website” button. The code that will need to be copied and installed is as follows: script type=”text/javascript” src=”http//kinonabis.ru/informer/4”>

Video on the topic

Sources:

• install tv

Tip 5: How to organize a television program release

You will need

• - equipment for video production.

Instructions

Prepare a TV program. To do this, you will need a concept for the transmission itself. You can develop it yourself or involve specialists in this matter (editors, journalists, analysts, producers). When attracting people for this purpose, it is best to use recommendations from friends or colleagues whom you trust.

Assemble a team of professional journalists. The best method to identify the abilities of journalists is a test task. Gather job applicants in your office. Invite them to sketch out a list of topics they would suggest for your program. Check out these lists and offer to write texts for stories to the most successful candidates.

Select a team of people who will be responsible for production. Cameramen, editors, sound engineers, editors, etc. When selecting this level, it is best to focus on the resumes of applicants and the work experience described in them. Give preference to candidates who have universal skills (cameraman-editor, journalist-editor, etc.).

Arrange a viewing of the pilot episode of the program for experts and ordinary viewers. Experts can be people from the field of television, whose opinions you listen to, whose work you follow with professional interest. Discuss your program with experts, but also take into account the opinion of the audience, because it is for them that the television program is created.

You can set up your TV to receive channels according to our instructions. Use the Settings Wizard, which opens when you turn on the TV for the first time.

Process in automatic and manual mode.

The setup procedure can become more complicated when working with satellite or cable television.

In most cases, the automatic search copes with its tasks, and after the procedure the user can only remove unnecessary channels from the list.

But sometimes the equipment incorrectly takes into account the scanning range, signal source, etc. Then the procedure can be carried out manually or by selecting new parameters. Of course, if we are talking only about new generations of TVs. In older ones, owners usually only have access to manual mode.

There are no particular advantages in choosing one or another channel search method. The first, automatic, saves time, provides high accuracy, is suitable even for inexperienced users, but can occasionally make mistakes. The second, manual, requires more time and knowledge, but allows you to configure channels in more detail, including in case of poor reception quality.

If none of the methods succeed, you can use the services of a telemaster. The cost of the call will depend on the region of residence, distance from the workshop and its pricing policy. As an alternative, you can consider contacting volunteer organizations that can help with the transition to a new TV format for free.

On old TV, TV channels are adjusted using special knob buttons. For most models, they are located under the switches or near the antenna connector on the back of the panel. You should look for channel frequency regulators under special covers or in drawers.

Setting up a TV of older models is always done manually. Very often, when you turn it on again, there is a need for additional adjustments due to the lack of memory systems. If desired, digital channels can be obtained by connecting the DVA-T2 set-top box.

How to set up a new TV

To connect a new TV to a regular antenna, you must switch to your native language. To do this, connect the tuned receiver to the antenna cable, then long press “OK”, call up the menu, look for the “Country” item, the word LANGUAGE and select RUSSIAN. Now the entire menu will be in Russian.

Automatic channel tuning on TV

How to set up your TV automatically? Almost cable television, as well as analogue, are configured in the same way. It is performed after concluding a service agreement with the provider.

Turn on the receiver, the message “channels not configured” will appear on the monitor. Using the remote control, call up the “Menu”, move the cursor one by one to the lines “Channel settings”, “Automatic tuning” and indicate the type of broadcasting that needs to be configured. Now all that remains is to press ENTER/OK. The television receiver begins to tune in to the channels, scanning the entire frequency range. This takes a few minutes and depends on their number; after the TV ends, it will show all saved TV channels. If it doesn’t work, open and study the instructions that came with the device. It contains a detailed description of the setup for this TV.

When a TV operator adds new channels, the settings are made again; for this, the edit line is used. But even after restarting the automatic tuning, all previously recorded channels are saved, and new ones are simply added to free numbers.

If the old receiver needs to be configured in a new way, find the “Delete” entry in the menu program, confirm the action by pressing “OK” and restart the automatic setup.

Manual channel tuning

Manual tuning for television channels is definitely necessary, because the automatic one records some unsatisfactorily. For example, doubles often appear, the image is of poor quality, and there may be no sound. They are removed. But if the channel needs to be saved, you will have to do it manually. This is done like this:

• in the menu look for “Channel tuning”, “Manual tuning” and press ENTER/OK;
• select “Program” and assign numbers to the channels;
• choose a color system: PAL or SECAM, sound: 2.0 (stereo), 5.1, etc.;
• conduct a “Search” for the channel, if successful, click “Save”.

If necessary, these steps are repeated for each of the TV channels. They must be confirmed by pressing ENTER/OK.

Setting up satellite channels

How to set up satellite channels if the dish is installed. The cable connects the receiver and the TV, switching it to monitor mode. The remote control for the tuner marks the desired satellite. In the receiver menu, select its scanning. The easiest way is to entrust this to an automatic search, which immediately does everything on its own, without requiring you to enter the transponder settings manually. Before this, it is advisable to study the instructions that come with the device. It describes in detail how to set up digital channels on your new TV.

There are a lot of such channels, so you need to choose those digital channels that you like best and will be watched at least sometimes. We must not forget that when the image deteriorates, the cause may be strong wind and rain, so sometimes the position of the dish is adjusted.

Setting up digital channels

High Definition Television (HDTV) is a modern standard for transmitting compressed video signals. This technology provides the highest picture quality. On all modern TVs with a DVB-C tuner, it is now possible to configure digital channels. But such a TV must also have HD viewing capabilities. This new technology is becoming increasingly accessible to a wide range of users. Various companies are appearing that offer setup of digital channels. But you can solve this problem yourself and for free.

Having general knowledge and the manufacturer's instructions, it is easy to set up any TV. First, mark the lines:

• “Options”, “Automatic setup”, mark the source and press “Start”;
• hover the cursor over “Digital” and press “Start”;
• “Search mode” and “Full” option;
• enter the following data into the fields: frequency (kHz) – 314,000 (314 MHz), modulation – 256 QAM, speed – 6875 kS/s.

Modern TVs are equipped with network search, you just need to turn it on and wait. All parameters will be entered automatically. To add new digital TV channels, rescanning is done. After that they appear in the list.

Setting up TV without an antenna

Having high-quality cable Internet, you can watch TV without an antenna. To do this, connect the cable to the TV set-top box. There is another plus: channels from the former CIS countries will become available with excellent quality. Now the vagaries of the weather will not affect the broadcast. There is another positive point: you can watch a missed movie later at any convenient time. can be found in the corresponding section of our website.

Setting up Smart TV makes it possible to watch TV programs directly from the Internet, but to do this you need to have a stable network with a speed of at least 20 Mbit/sec.

Let's look at how to set up a Smart TV. You can connect it in the following ways: connect the router and computer with a cable or use the Wi-Fi service. To ensure simultaneous access to a computer and TV via a 3G modem, a TP-Link TL-MR3420 router is used; it is also suitable for a cable network. Modern Smart TVs are equipped with a special output for connecting to a loyal network; it is connected with a cable to the router. In this case, the router gives the TV an IP address and all other necessary settings. There is nothing else you need to do, the TV is ready to go.

Some TVs have built-in Wi-Fi or the ability to connect a Wi-Fi adapter, which can be purchased separately. Which adapter to choose is indicated in the TV instructions. One more condition: the router must also have Wi-Fi. This technical possibility does not require running a cable from the router to the TV.

When connecting via wi-fi, go to “Network connection”, select the desired network, and indicate the wi-fi access password. After this, the IP address for the TV device will be automatically assigned.

Image Settings

Setting the TV image is done as follows: in the “Service Menu” find the “Image” line. The necessary parameters will appear: “Contrast”, “Brightness”, “Clarity” and “Color”. Use the cursor arrows to change them, selecting the ones most suitable for the eye.

Once having set up the TV on their own, each user will be able to apply this knowledge again; they cannot do without it, because very often new television channels appear on the network or the signal source changes. You have to wait for hours for a technician, when the whole TV setup takes a few minutes, and most importantly, you don’t have to miss your favorite show.

While still at school, I came up with a nickname for myself sTs. Since I was interested in video editing, at first it was an abbreviation for my own desired TV channel in the future ( S tylish T television S studio). Later I began to use it everywhere, but with the advent of the Internet the hobby died out. But the desire to make your own channel remains) Let it be small and broadcast only on 3 home TVs - this is an excellent alternative to terrestrial shit TV.

Task: force 1 computer - server broadcast around the clock just what I want, without interfering with other channels (although personally, I practically don’t watch them at all due to the wild debilitation and uselessness of the shit they show there).

Here is a diagram of it:

I’ll make a reservation right away - having studied the free packages satellite TV I didn’t find anything interesting for myself, and paying for something I practically never use is stupid. ( Internet- an excellent substitute for having a great time).

Here is a diagram of the desired DIY television:

There are no costs. Everything except plugs found at home. Radio mouse just now, but surely someone will have it.

For homemade television broadcasting you need:

— computer signal converter to high frequency (at the antenna input of the TV)

— cable to roof antenna (75 ohm)

— wireless mouse(preferably to correct the broadcast without leaving the body)

Here is a diagram of how the video will be transmitted from me:

simple video card with connector S-Video- original adapter for tulip— tulip adapter — Scart (+ 2 audio wires with audio through a 3.5 mm jack splitter) - video recorder sony - the output from the tape recorder is connected antenna cable directly with the antenna on the roof - from antennas goes as before splitter on TVs.

The trick is that the antenna cable gives mega-noise to all the wires, so I shielded the entire cable from the video card to the video camera with foil. This is the simplest and cheapest connection scheme. I couldn’t find any VGA converters in the city, but the ones that were available before cost from $35. It’s easier to buy a video card with a TV output if yours doesn’t have one and connect it to a free connector on the motherboard.

Bought wireless mouse with range 15 m straight line (frequency 2.4 Hz)

This turned out to be not enough and I increased the range of the wireless mouse so that she began to work through the wall across the room.

Pros:

— no need to pull wires to each TV separately

— the sTs channel is located among others and is switched by the remote control

- cheap

Cons:

- the range of the mouse may not be sufficient even after increasing it by extending the antenna on the receiver

— not everyone has a server running 24/7

Lately, cable television has become increasingly popular. In addition, digital television channels, featuring interesting programs and high broadcast quality, are becoming more and more accessible. The number of companies that offer connection and proper configuration services is actively growing. Despite this, digital television is possible on any Samsung TV. The procedure pleases with maximum simplicity and speed.

What is required for digital cable television?

Digital cable TV channels are only available if the Samsung TV successfully supports the DVB-C standard. You can find out about support for this technology not only in the documentation of the selected model, but also on the official Samsung website or in the TV review. Most often, televisions support DVB-C, as digital television is becoming a kind of classic.

Configuration is traditionally carried out manually. Despite this, maximum ease of holding the event is provided. Once all the parameters are set correctly, you can start searching for available channels. If you immediately select automatic search and refuse to specify optimal criteria, the process promises to be long and without guaranteed success.

Instructions for setting up Samsung cable TV

The instructions are as easy as possible, so every Samsung user can carry out the procedure independently. An easy setup procedure is required. If you are interested in how to set up cable TV on a Samsung TV, it is recommended to go through several easy and quick steps.

1. Initially, you need to press the Menu button in order to go to settings and open all possible functions of the TV.
2. Now you should go to the “Channel” section, which has an icon in the form of a satellite dish.
3. Tabs open on the right side, but the one of interest is “Antenna”. It is important to select "Cable". For successful setup, you must complete additional settings: Country – Other.
4. The Samsung TV will ask for a pin code, which you will need to enter without a single mistake. By default, the following PIN code is set on Samsung TVs: 0000. However, the code combination can be changed.
5. In the “Auto Configuration” tab, select the signal source – “Cable”.
6. It is mandatory to set all parameters, and then click “Search”. It is recommended to perform a quick search on the Auto network, and the frequency should be 314,000 KHz, modulation 256 OAM, data transfer rate - 6875 KS/s.
7. After successful setup, all available TV channels will be visible.

Self-tuning of digital television is a reality of the 21st century.

Many people know that for a number of reasons, for almost a year on weekdays I have only had normal Internet at work. In the evenings there is a TV, but there is no cable TV, much less a satellite dish.
I was tormented and upset, missing Champions League matches and other goodies. And just recently I resolved the issue. As it turns out, almost any of us can watch television channels in very good quality. Now I'll tell you how.

Through a cable and a plug with strong interference, I was shown “First”, “Russia 1” and “Ren TV”. And everything would be fine. I hardly watch TV (only sports, “What? Where? When?” and sometimes the news). In addition, you can always insert a flash drive with some good TV series into your TV.
But I would still like to see football when it is shown on public TV. One day I saw an encouraging message on Twitter. Having found out what was what, I eventually solved my problem.
In fact, it is enough to catch digital television from the nearest tower. True, a short survey of friends and acquaintances showed that few people know about this.
So.
Step one. In any digital supermarket or electronics store we buy a digital TV receiver (with DVB-T2 technology). I’ll make a reservation: many modern LCD TVs already have them, and in this case you can skip the first point. But I will return to personal experience.
Small boxes with remote controls cost from 1200 to 2500 rubles. I took this one for 1890 krona.

Receivers at this price have teletext functions, video recording to a flash drive, and, what’s nice, they also have a delayed recording function. I returned from work and watched the afternoon match. Also, such receivers play video from a flash drive.

Step two. We purchase an HDMI cable. Cost me 416 rubles. As far as I understand, any will do, they only differ in length.
This step can also be skipped - the receivers are equipped with regular wires, but, as I understand it, they convert the digital signal to analog, so HDMI still rules. For truly.

Step three. We purchase an indoor antenna. Here, I admit, I played it safe. Someone said you could just use wire. Others insisted that the simplest antenna would do.
In the store they began to actively convince me that with the simplest indoor (not outdoor) antennas it may or may not catch - it all depends on the nuances, the location of the windows, etc. But with this antenna for 1000 rubles, they say, it will catch 100 percent. This was my last purchase, and I bought the antenna for 990 rubles. Maybe he overpaid. But, you must admit, the whole set is still quite budget-friendly.

That's all. All that remains is to connect the antenna to the receiver at home, and the receiver to the TV. After 10 minutes, you will catch either ten channels and three radios (1st multiplex of digital terrestrial television), or as many as 20 channels (if you catch both the 1st and 2nd multiplex). In large cities and regional centers there are definitely twenty channels.
Out of my dozen, I watch channel 4 at most (by the way, Public Television of Russia is very distant, just a little, but it resembles the Dozhd channel, now paid).
I may not watch many channels, but they are of great quality, which is not available even in my parents’ house, where there has been cable for a hundred years. And, I note, all this without any subscription fee. Cable for parents costs 250 rubles a month, and they only watch 5-7 channels. I'm not even talking about kits with satellite dishes - one piece of equipment costs 9-15 thousand. This is beneficial when you actually have your own home, and when you watch TV all day long.
I don't need to pay anything now. At all. Now I understand that the state is investing significant funds in this. I understand what officials mean when they talk about “affordable television.” Why didn’t I know all this confusion a year ago - who will figure it out...
Probably, now there are such TVs and such technologies that many of you are well aware of digital TV via an antenna. But I hope this post is useful to someone.