How to make a gel phone case. How to clean a silicone case if it has turned yellow or darkened. Paper smartphone case

Cleaning your phone case regularly will help keep dirt buildup to a minimum.

Silicone cases have gained popularity due to the high degree of protection of devices from mechanical damage. Now it's not only convenient way protect your phone, but also give it personality with the help of colors. However, like any thing, the case must be kept clean and tidy.

To keep your product clean and last longer, remember the following:

When purchasing a phone case, focus on its durability - choose models made of high-quality silicone;

When choosing a light-colored model, take the time to get wipes for optics and wipe them regularly;

Silicone easily absorbs paintable materials and dirt. If you do not clean the product on time, it will appearance may lose its attractiveness forever;

Despite its ease of use, silicone often loses its transparency. To make your phone look neat in a case, you should give preference to matte designs. They require less maintenance and retain their aesthetic appearance for a long time.

Cleaning silicone cases: transparent and matte

There are several ways to wash the transparent case. It all depends on the type of pollution. They get dirty faster than matte ones, and therefore require preventive cleaning.

Products that are useful for washing silicone coatings:

• dishwashing liquid;
• soda;
• a soft-bristled brush (use a toothbrush).

These are the main materials that can be used when the surface begins to fade or there are clear traces of dirt on it.

To begin, place the case in a solution of water and detergent. Leave it for an hour and a half. Take a plate where you mix a few drops of water, detergent and soda. This composition must be applied to the brush and to areas of contamination. Wipe the surface using gentle circular movements. Then rinse the product and evaluate the quality of its cleaning under a bright light source.

This standard method, which is suitable for all models. It washes away the top part of the dirt layer and removes greasy stains, but may not be effective if:

there are a large number of deep scratches on the cover, where coarse particles of fat and dirt have accumulated;

silicone is subject to frequent contact with clothing rich colors which is prone to shedding.

Scratches and slight discoloration indicate wear and tear on the silicone. In this case, aggressive means are used, but the risk of material damage remains. An additional option is technical (isopropyl) alcohol, which is used to wipe the surface after standard cleaning in a soap solution.

It turns yellow, then darkens. What to do?

Each item has its own expiration date. When silicone turns yellow or dark after the first month of use, this indicates two factors: irregular care or poor quality silicone. To the covers low quality It is not recommended to use aggressive detergents and bleaches. This leads to yellowness and brittleness.

The surfaces of the covers also tend to darken. This occurs due to frequent contact with other materials or fabrics.

It is worth noting that darkening or yellowing does not only appear in silicone models. Ways to combat unwanted manifestations for different models- identical.

Unlike silicone, polycarbonate cases do not change color, so they can be a good alternative. Their only disadvantage is that standard cleaning of dirt will have to be done much more often.

In both cases of darkening or yellowing of the material, the main task is to bleach it.

How to bleach matte and transparent surfaces:

covers good quality are not afraid of solvents, primarily acetone;

darkened surfaces can be bleached using gasoline, citric acid and chlorine bleaches.

When choosing any of the products, remember that the product should never be completely immersed in the solution. Whitening is carried out only by applying the product to the surface. Then gently wipe with a sponge or white cloth, then rinse with running water and wipe dry.

The same method is also suitable for removing only fresh stains from paint or brilliant green.

How to wash a white case:

The white surface is the most vulnerable, so to clean it, use special sprays or liquids for cleaning plastic coatings.

If the product is dirty, has a dull or yellow appearance, it should not be bleached with chlorine. Use toothpaste or powder. The abrasive substances of these products will help if the problem is noticed in time. Otherwise, white covers made of plastic, rubber and silicone will not respond well to bleaching.

White leather case Easier to clean than others. Turpentine is recommended here to help with stains various types. If the problem is yellowness, use the following method:

mix ammonia, water and soda in equal proportions;

wipe the case with a sponge and leave for 20 m;

Complete the procedure by wiping the product with a clean damp cloth or napkin.

Care for the product regularly. Cleaning methods are not complicated and take little time. Spend a couple of minutes for quality care and forget about regularly purchasing new covers.

The cell phone case is a little inappropriate in size. How to stretch it?

My cell phone case didn't fit a bit. That is, the mobile phone fit in there by tension. At the same time, the buttons turned on and the display lit up. I solved this problem by wrapping the phone in paper and putting it in a case overnight. You can add paper as you stretch the cover and increase its size. After two or three weeks the problem was resolved.

To stretch a leather case, make a model of your phone from a piece of wood (the thickness should be slightly thicker than the phone), split it in half lengthwise and insert them into the case. Between the halves, insert a plastic insert of the thickness to which you want to stretch the phone and put it in a jar of warm water for a day (you can put the jar on the battery). Remove the case from the water and air dry.

Alternatively, instead of water, you can use alcohol to significantly reduce the drying time.

Why a tab? Because after drying, the cover can compress the model so much that it will be impossible to remove the piece of wood. In addition, the tree will also swell from water. And plastic, even sandwiched between pieces of wood, can easily be pulled out. Just remember to make the insert long enough so that you can grab onto it later.

Don't want to bother with making a layout? There is an easy way, but the quality is not guaranteed.

Just insert pencils, felt-tip pens, round rods, etc. inside the case along the edges. of the appropriate diameter, and push a rectangular piece of a suitable size between them with tension. The rest is the same as described above.

• How to stretch a leather phone case?

  1. Soak in an alcohol-glycerin solution.
  2. Insert a piece of wood into the cover of the shape to which you want to stretch the cover. Wait a day.

  How to stretch a silicone case?

  1. Soak in hot water.
  2. Immediately after heating, place on a wooden mold.

Nowadays, communication stores have a large selection of cases for phones and smartphones. But when you start looking for a case, you are often faced with the problem of a small selection specifically for your model. Or it is available, but in the wrong format and has a boring, standard color. To do this, we have selected for you several master classes on how to make a case with your own hands from improvised materials. After all, every smartphone owner wants to be unique and make it beautiful, bright and convenient. So let's look at several options for covers that you can make at home.

Paper case

The simplest and most budget-friendly option for you might be a case made of paper. Its assembly will not take much time; it is made using a simple origami technique. This one won't last, of course. for a long time, but if you urgently need a case, then this option will be excellent. Let's take a look at the step-by-step instructions.

You will need:

1. A4 sheet of paper
2. PVA glue

Work progress:

1. Place a sheet of paper horizontally with your phone on top of it.
2. Now wrap the phone in paper until the end of the sheet.
3. Wrap the lower part several times to the place where the phone is located.
4. Now, to make the bend hold better, bend the triangles upward, at the bottom of the cover.
5. If you need a stronger structure, use glue to seal the folds and joints. Our paper case is ready.

Video paper case

Cover made of rubber bands

A phone in a case made of rubber bands will look very original. Such a case will require time and patience from you, but the result will delight you and surprise your friends and even strangers. We have prepared step-by-step instructions for iPhone 5, but for other smartphones you just need to take a different number of rubber bands. So, let's start making crafts with our own hands step by step.

You will need:

• Rubber bands of 3 colors - 500 pcs.
• Hook
• Weaving machine

Work progress:

1. There should be 2 rows on the machine. The holes in the top row should face left, and the bottom row should face right.
2. We begin to put on the rubber bands from the top row of the second pin, and put it on the cross on the 3rd row of the bottom.
3. Next, we put a cross on a cross from the 2nd bottom row to the 3rd pin of the top row.
4. In the same way we make the next one from the 3rd pin from above to the lower 4th. And then from the lower 3rd to the upper 4th.
5. There should be 3 crosses like this.
6. Pass 2 pins in the center and continue to weave 4 more such crosses. On this side you should get 4 crosses intersecting each other.
7. There should be 2 free pins left along the edges of the machine.
8. The next row is to put rubber bands on the top and bottom pins that are opposite.
9. So we put it on all the pins of the previous row.
10. Turn the machine vertically towards you so that the top pins point their heads towards you.
11. We put on the first elastic band without crossing it on one upper and one lower part.
12. We fasten the remaining rubber bands, without crossing them, along the top row, one after another. In this row we are not missing the two middle pins.
13. We do the bottom row in the same way, connecting it on the second side with an elastic band, just like we started the row. It turns out that we walked one row in a circle.
14. Starting from the bottom row, we use a hook to remove two rubber bands from each pin, which are located at the very bottom. We skip the middle pins. Thus, there should be two rubber bands left on each pin on the machine.
15. We do the next row in the same way as the 3rd, in a circle, one elastic band after another. For this row we take rubber bands of a different color.
16. Next, remove the bottom 2 loops in a circle.
17. We put the elastic bands on again in a circle, using a different color, and then remove the bottom loops.
18. In the same way, we make two more rows alternating colors. One row means putting the loops on once and then taking them off.
19. Let's start making a hole for the screen. Turn the machine vertically, the left row of bayonets should be facing you.
20. We start working in the left lane. We remove the bottom rubber band from the 3rd pin and put it on the next 4th one. Thus, the last loop should transfer to the 7th pin.
21. Now remove the remaining loop from the middle 5 pins. There should be 3 pins on each side with rubber bands on.
22. We knit the next row in the usual way(rubber band after rubber band). We do this clockwise, starting from the 3rd working pin. We are not working with five pins on one side yet.
23. We need to remove the lower rubber bands; there should be 2 loops left on the pins.
24. In the same way we need to knit 11 more rows. Don't forget to alternate colors.
25. Next we knit the row clockwise, now filling in all the pins.
26. Remove the bottom rubber bands from the pins. But we don’t remove the five who were not previously involved in this row.
27. In the row where there are unknitted pins, we skip two workers and from the third we remove the lowest loop and put it on the next pin. We do this, leaving only the last 2 free.
28. Now knit one row.
29. Take the machine vertically and along the right row from the second working pin, remove the bottom loop and put it on the next bayonet.
30. The last loop should be placed over the 4th working pin.
31. Now we remove the lower loops from the 3rd and 2nd.
32. Next, we put on the loops in a circle, leaving our 2 free. Then remove the bottom hinges.
33. On the next row we put on rubber bands, using all the pins. We remove the loops in the usual way, without touching only the two pins, where there are only 2 rubber bands.
34. On the first pin we swap the top and bottom loops and transfer the top one to the next pin, connecting our structure. From the next two pins we remove one bottom loop and transfer it to the next pin.
35. Next we knit the row in the usual way.
36. We begin to close our case. We make a row of crosses as at the very beginning, without missing a single pin.
37. We make the next row with crosses between opposite pins.
38. Next, we begin to remove the lower loops, leaving only the rubber bands from which we made figure eights. There should be 3 loops left on each pin.
39. Now we transfer the bottom loop of each pin to the next one.
40. We also do the next row.
41. On the right side, use an additional elastic band to make a knot and remove the cover from the machine.
42. Now straighten the protruding loops and hide the knot. Now you can use this original case.

Video on how to make a phone case from rubber bands

Hot glue bumper case

Using a gun and hot glue, you can make a beautiful bumper phone case. It looks very interesting and unusual. And its originality depends only on your imagination. Such a cover can be openwork or simply with a flat surface and patterns.

You will need:

• Glue gun
• Nail polish
• Parchment paper
• Scotch

Work progress:

1. Cover the phone with parchment paper so that the back and sides of the phone are seamless. Secure the joints in the screen area with tape.
2. Mark the places where the buttons, camera and sockets are located.
3. Now use hot glue to go along the sides of the phone and highlight the designated areas along the contour.
4. Make a swirl pattern on the back of the phone so that it connects to the side.
5. Wait for everything to dry and paint it in the desired color with nail polish.
6. Now you can put a beautiful case on your phone.
7. If you don’t know what pattern to make, you can use the video master class.

Balloon phone case

A very simple way to make a phone case with your own hands is to use a regular balloon. This case will not protect you from impacts, but will help keep your smartphone dry. Let's see step-by-step instructions with photos and video descriptions of how to make a phone case from a ball.

You will need:

• balloon

Work progress:

1. Inflate the balloon, do not tie it.
2. Place your phone with the screen facing up on top of the ball.
3. Now, pressing the phone into the ball, gradually deflate it.
4. When there is little air left, release the ball while continuing to press the phone.
5. The ball will fit around the phone and the case is ready. You can also take a ball with some kind of muzzle or design, then your phone will become more original.

Phone case

A book case will require additional costs, but you can choose the color and shape of such a case yourself. It can protect your smartphone or phone from damage if it is kept closed. The shape of such a case has a special charm, because the cover can have absolutely any design.

You will need:

• Phone-sized notepad with elastic band
• Stationery knife
• Ruler
• Pencil
• Narrow elastic band
• Cardboard

Work progress:

1. Using a knife, cut out the notepad sheets and side parts.
2. Divide one side in half and mark with a pencil.
3. Cut with a knife along the line to the outer grain of the cover.
4. Now in this place you need to cut a strip about 0.5 cm wide, so that later it will be easy to make a fold here.
5. Carefully glue the inside sides of the cover with glue.
6. Draw a shape for the inside of the cover along the outline of the cover on felt.
7. Place our felt blank on the inside of the cover and cut the felt along the side fold.
8. Glue the felt blank to the cover.
9. On a piece of cardboard, outline the phone and cut along the line. Glue it to the felt and cut it according to the shape, retreating from the cardboard to 1 cm.
10. Cut the felt at the corners with two cuts on each side so that you can bend it. Glue the corners.
11. Glue two rubber bands across this blank so that you can then attach the phone here.
12. Glue the blank onto the outer bending half.
13. Now our case is ready for use.

Cardboard case

A cardboard cover does not require additional costs, and is made from improvised materials that are found in almost every home. The case will have a neat and pleasant appearance. Now let's start making crafts with step by step instructions.

You will need:

• Sheet of cardboard
• Scissors
• Rubber
• Marker

Work progress:

1. Draw the phone on the cardboard twice with a gap of 0.5 cm between them.
2. Cut along the outline.
3. Make two folds along the lines in the center of the workpiece, the case is almost ready.
4. Now glue one side of the case to the back of the phone.
5. To make the case close, you can put a thin elastic band on it, or make holes in the sides of the sides of the case and attach a ribbon or rope.

Felt phone case

This case has a beautiful appearance, its shape resembles a pocket in which you hide your phone. To make a phone case from felt you don’t need any special skills, just a little imagination and the necessary materials. You can find step-by-step instructions in the description below.

You will need:

• Felt in different colors
• Scissors
• Ruler
• Needle
• Threads
• Glue gun

Work progress:

1. Place the phone on the felt, and stepping back from the edge of the phone about 1 cm, trace the outline. We need 2 of these blanks.
2. Sew both pieces together using an outside seam.
3. Now you need to make a decoration for the case. We cut out balloons in the form of drops from different flowers.
4. We also cut out a house from felt, windows and a door from the same.
5. Using a glue gun, attach the house to the bottom of the cover.
6. Now use dotted threads to embroider the threads for the balls.
7. Glue the balls over the threads, layering them to create a three-dimensional pattern.
8. An amazing case on the theme of the cartoon “Up” is ready!

Fabric cover

You can also make an excellent DIY phone case from fabric. This case is perfect for fans of the cartoon “SpongeBob”. It is beautiful and original, it will please anyone. Let's see how to make such a case at home with step-by-step photos and video instructions.

You will need:

• Any thick fabric (preferably felt)
• Acrylic paints
• Threads with a needle
• Scissors
• Colored paper
• Stencil

Work progress:

1. Using a stencil, cut out two identical blanks the size of the phone, with wavy edges.
2. On one of the blanks, draw SpongeBob's face.
3. Cut out blanks for pants from colored paper and glue them onto the blank with a muzzle.
4. Now sew the two halves together from the wrong side and turn them inside out.
5. The case is ready!

Video on how to make a fabric case with your own hands

Leather case

Another option for a phone case is to make it from leather. You don’t have to go and buy leather in a store, just find an old leather item and use it for this craft. This case is reliable and looks high quality, and no one will guess that you didn’t buy it.

You will need:

• Piece of leather
• Clamps
• Scissors
• Cardboard template
• Thick thread
• Gypsy needle - 2 pcs.
• Eyelet installation pliers
• Pen
• Decorative thread
• Eglets - 2 pcs.

Work progress:

1. First, measure the parameters of your phone. Add 1 cm to the length and 2 cm to the width.
2. Cut out 2 pieces from a piece of leather the size you need for your phone, adding the centimeters described above.
3. Round the corners of two pieces by placing one part on top of the other.
4. On the cardboard template, make small round holes at a distance of about 5 mm from each other.
5. Place the template on the folded leather pieces (the parts are folded with the insides facing each other) and make holes using pliers along the sides and bottom sides. Secure the template with clamps.
6. Place 2 needles on the thread on both sides.
7. We start stitching from the side.
8. First, go through the first hole with one needle and straighten the thread.
9. Next, we sew alternately with two needles, pulling the needles into one hole in opposite directions.
10. In this way we stitch the cover completely.
11. Now secure the thread by passing the needle through the last hole several times. Cut off the excess part.
12. On the top of the cover, make 2 through holes, at a distance of 1 cm.
13. Thread a decorative thread through them, putting aeglets on the ends in advance. Tie a nice bow.

Warm thread cover

This soft white and fluffy phone case will warm your hands in winter frosts. It is pleasant to the touch and has a cute appearance. Let's try to make such a case with our own hands following the instructions with a step-by-step description.

You will need:

• White yarn
• Glue gun
• Scissors
• Parchment paper
• Scotch
• Baking paper
• Ruler

Work progress:

1. Wrap the phone in paper, securing the seams and folds with tape on the screen side. So that the back cover has a flat surface.
2. Using a glue gun, make a base on the back cover, covering the entire surface with glue, leaving the holes for the microphone and camera free. Also process the side of the phone.
3. When the glue is completely dry, remove the base, now we will work with it.
4. Wind the thread around the ruler so that the threads are parallel. We wind it based on the width of the phone, it should correspond to the width of the wound threads.
5. Apply glue to one edge of a ruler with threads and glue it to a base made of glue. We wait a few minutes for the glue to dry and cut the thread along the opposite edge of the ruler. We also cut the thread from the skein.
6. We do this until the entire cover is filled with lint. You need to retreat about 5 mm from the previous row.
7. When you have covered all back cover do the same with the side parts.
8. Our case is ready!

Beaded case

A beaded case requires a lot of patience and perseverance from the craftsman, so not everyone will have such a case. Of course, you can glue beads to the cover of the phone, forming a pattern out of it, but a knitted one will look more beautiful and elegant.

You will need:

• Melange beads
• Melange yarn (cotton 100%)
• Hook

Some people buy a case to decorate their phone, while others buy it to protect the case from scratches and damage. And sometimes a situation arises when you like a mobile phone accessory, but the size doesn’t fit. How to stretch a case without damaging it? To solve this problem, you need to take into account its shape and the material from which it is made. Read more about it.

It is not difficult to stretch a leather case

How to stretch a leather case

A leather case that does not fit on the phone or fits too tightly, causing the buttons to operate, it is advisable to enlarge it a little. The leather stretches well if it is wetted with water, and when dried it retains its given shape, so use a simple method.

• Try to select or cut a piece of wood that is the same size as the mobile.
• Split the resulting workpiece in half along the flat side. Insert a thin plastic plate into the slot.
• Wet the cover well in warm water and stretch it onto a wooden model.
• Leave it to air dry without heat, otherwise the leather will dry out and crack.
• After about a day, when the cover is dry, remove the plate, and then the wooden block.

The accessory will stretch to required sizes. If you use a mixture of alcohol and glycerin instead of water, the drying time will be reduced, the procedure will be more gentle on the skin, and the surface will retain its shine.

How to stretch a silicone case

Silicone is a fairly durable and elastic material. There are many covers available from it, so you can always choose the right option. If desired, buy an accessory - a bumper, which is easier to put on and does not require selecting the location of the connectors.

But there are still times when it is necessary to stretch the silicone case. You can do it like this.

• Considering the property of silicone to stretch over time, you can crush it with your hands and pull it to the sides. If the size does not fit just a little, you will soon be able to put it on.
• After heating, the silicone becomes more flexible, and it is easier to pull the case onto the phone. You can use a hairdryer here.
• If there is a large difference in size, stretching on a wooden model is suitable. The cover must be heated in hot water, pulled onto a prepared block, heated for an hour in water and cooled in air. The disadvantage of this method is that the silicone can stretch too much and will dangle on the phone.

A special case that prevents cracks and micro damage will help extend the service life of the phone. Today, stores offer a large selection of different models.

Most of us love unusual things that help us stand out from the crowd.

A large number of interchangeable covers and panels helps to diversify the design of a mobile phone.

Buying the necessary accessory is quite simple. It’s another matter to do it yourself from a variety of available materials.

Here you can emphasize your individuality and refined taste. Our material presents several ways to create a case with your own hands.

Materials for creating a protective case

How to make a case with your own hands? Everything is quite simple. The main requirement of the whole process is the availability of free time and good imagination.

Various materials can be used to make the accessory:

• felt;
• jeans;
• silicone film;
• wide elastic band;

Soft base materials protect mobile phone from daily trials. There are no scratches or cracks on the surface of the glass.

Tools for making a mobile accessory

These include:

• sharp scissors;
• ruler;
• button;
• glue;
• ribbon or long lace;
• sticky base.

When working with each material, it is necessary to take into account its properties. For example, felt does not fray at the edges when cutting out parts, while denim requires additional border design.

Silicone film does not like frequent exposure to a sharp needle. To do this, you need to use glue that dries in a few seconds.

The process of creating a phone case

The initial stage of creating a case is the preliminary creation of the design of the future accessory. To do this, you can draw a sketch of the product on paper. It is important to consider the size of the phone, as well as the placement of the camera and microphone.

The finished case should be slightly larger than the size of the mobile phone. This will allow you to easily pull it out whenever necessary. Fabric accessories do not require specific sewing skills. Here you need to carefully sew two parts together.

The process of creating a case is divided into several stages:

• Cut out paper patterns.
• Transfer them to the material from which the cover will be made.
• Carefully cut out each piece, leaving 1 cm for seams. This technique allows you to sew the correct product, taking into account the parameters of a particular model.
• To join felt and denim, you will need a sharp needle and strong thread.
• Specialized glue will help you make a silicone phone case.
• When all the parts are connected to each other, you can fix the protective button, which will prevent the cover from constantly unfastening.

For people leading an active lifestyle, you will need a sports phone case. Thanks to the thick elastic band on the forearm, it fits well on the human body.

To do this, a small piece of thick elastic is sewn to the finished protective product. As it moves, it will press the mobile body tightly against your hand.

Pay attention!

The design of the phone book case is a cover. The mobile phone case is fixed to one side, and the other part serves as a protective panel. A tight fit of the upper part of the case will be ensured by small magnets that are fixed in upper corners covers.

You can make additional sections for storing plastic cards using a multi-layer fabric structure.

To do this, you will need three fabric bases, which differ in size.

The first part of the pocket is sewn to the base of the cover. All other elements are sewn together and fixed to the previous parts of the cover.

Decorative elements will help you create an exclusive design for your phone accessory. Fabric appliques will add zest to your product. You should not use multi-colored details to decorate the case.

Pay attention!

DIY phone case photo

Pay attention!