How to reflash an iPhone using a PC and iTunes. iOS: Download free firmware for iPhone, iPod touch and iPad of all versions, changes in the latest version of iOS Latest firmware for iPhone 5c

iPhones are now very reliable smartphones, since Apple places great emphasis on their quality, but it is still a technology and, like any equipment, be it a computer or a TV, it tends to break down. All these problems with your smartphone leave you with a choice: take your smartphone to a service center, where they can charge you a hefty sum, or try to fix it yourself. These instructions are general and suitable for all iPhone models.

Let's figure out why iPhone firmware is needed:

1. In case of software failure.
2. In case you need to install the latest OS version.
3. In case you forgot your password (not to be confused with Apple ID activation blocking).
4. To create clean system after changing the owner of the device.

In this case you can do very simple steps in order to restore your device to a working state, this does not require programmer knowledge; it’s very simple. One of the simple ways to restore an iPhone is to reflash it; for this we need a computer and iTunes. By the way, the same actions are done in service center.

Before starting the process, do not forget to do Backup your data music, photos, contacts and more important information, because after flashing the iPhone, all information will be completely deleted.

Preparation in iPhone firmware

Download the required firmware version with the extension .ipsw. There are different versions for each iPhone model.

There is a small problem with choosing firmware, but it lies in the fact that there are GSM And CDMA models that work on different networks cellular communications. Therefore, you need to choose the model that suits you. Firmware for GSM won't install on CDMA.

After you have determined your model, download the firmware on your PC that is suitable for your gadget, here is the site where you can -

First you will need to go to settings and disable the feature Find iPhone Without this, you will not be able to flash your device, as iTunes will give an error. Download the latest version from the official website.

iPhone firmware in action

There are two ways to flash an iPhone, through Recovery Mode And DFU Mode. Rcovery Mode, this is an emergency recovery mode. Designed for recovery after the smartphone has stopped working normally.

IPhone firmware via RecoveryMode

Turn off your phone and wait for the screen to go dark while holding the button Home connect it to PC. The computer recognizes the smartphone in recovery mode.

If iTunes does not react in any way, click on the smartphone icon in the iTunes program and look for the item Restore iPhone click on it while holding the Shift key (for Windows OS) for MAC hold down ALT. Also in this menu there is such a function as updating the iPhone:

A file manager will appear in front of you, look for our firmware and click Open. Next, iTunes will do everything itself, wait until the download completes. After the download is complete, disconnect the iPhone from the PC and long press the button Power turn off the smartphone. Then quickly press the button Power turn on the iPhone. That's it, the iPhone is ready to use.

iPhone firmware via DFU Mode

1. Select your device in iTunes.
2. In the control menu we find restore iPhone
3. Click on this item while holding down the Shift key (for Windows OS) or ALT for MAC
4. In the window that opens, select the file with the firmware and open it.
5. We are waiting for the firmware process to complete.
6. We turn on the device and use it calmly.

This method is suitable for those who have Jailbreak Is anyone unable to flash an iPhone via Recovery Mode.

All kinds of gadgets have become an integral part of our lives and many can no longer imagine their existence without them. Technological developments are becoming more advanced every year and provide us with certain conveniences and entertainment.

One of such products, designed to provide the user with a comfortable and at the same time useful pastime, is the Apple iPhone 5c smartphone. In the market of modern gadgets, this model has proven itself to be the best, thanks to its advanced functionality.

Malfunction

The iPhone 5c manufacturers tried to improve to the maximum all the shortcomings that were present in the first fifth-generation devices. As a result, they got a gadget that was quite impressive in its capabilities, which many users liked.

With constant appearance, which differs little from its fifth-generation predecessors, the iPhone 5c has undergone some changes and rightfully took a leading position in terms of functionality. The developers of the gadget have really produced a practical device that has high-tech characteristics.

However, like any technology, the iPhone 5c has its pros and cons and is not immune to malfunctions. As a rule, technology of this level is characterized by blocking and other equally pleasant things that require reflashing the device’s intelligent system.

How to flash

Typically, a user who needs to restore the functionality of his broken equipment takes it to a service center. However, the work of specialists requires certain financial costs, and flashing iPhones is not cheap.

Like any smart device, the iPhone 5c has its own system, which can be restored using special programs. Therefore, before going to the service center, try to carry out the flashing process yourself.

In order to restore the functionality of the gadget, you will need a computer directly with iTunes installed on it, a connection cable and an official software.

If all components are present, try the following sequence:

• connect the device to the computer using a cable;
• launch iTunes;
• install on your computer special program for firmware;
• press and hold the “Shift” key for several seconds;
• after the corresponding window appears, insert the firmware and confirm your action;
• wait for the process to complete, and only then disconnect the iPhone from the computer.

All work to restore the functionality of your device will be done by iTunes program. All you have to do is be patient and, following simple steps, wait about half an hour.

Restoring iPhone 5 via iTunes:

Reflashing an iPhone means installing new software into the device. But this procedure does not always mean that the newest product will be installed; sometimes it is necessary to update the older firmware. Among fans of Apple smartphones, there are many who remain faithful to a certain iOS versions. Having purchased a modern iPhone model with the latest operating system, they exchange it for an older one. Fortunately, this procedure is possible. Any user with at least a little knowledge of mobile devices can flash an iPhone 5 on their own, just like the iPhone 5C and many other models of Apple gadgets.

How to reflash an iPhone 5S yourself, and is it possible to do it? in different ways, described in the instructions below. Of course, it’s easier to flash an iPhone 5 from specialists by contacting a service center, but today this type of service is quite expensive. Considering that a “fresh” version of iOS is released almost every year, it’s better if you reflash your gadget yourself. Moreover, it is not as difficult as it might seem at first glance.

There are 2 types of iPhone flashing:

Restoration, when the device is returned to basic settings, and all information stored in memory is deleted. The operating system remains the same or the version that the user chooses is installed.

An update when an iPhone 5S or other device receives a new version of iOS instead of the previous one, but all data and content on the device is retained.

It should be noted that the manufacturer did not provide the user with the opportunity to “downgrade” the version of the operating system. For example, when the device has iOS version 7, then it is not possible to return to, say, the fifth version using conventional means. Just as it is not possible to switch to the latest version of iOS from a beta version.

However, like any rule, there are exceptions. During the first six months after the release of a new operating system the owner of an Apple device has the right to return to one of the more earlier versions Software, if the new one does not suit you in some way. In addition, he can use unofficial products like RedSnOw, but they only work on older iPhone models.

How to reflash an iPhone: preparation

Before flashing your smartphone, you need to carry out a number of preparatory steps for the operation to be successful, namely:

Upload the firmware file to your PC or laptop. Finding a resource where you can do this is very easy - there are many such sites on the Internet. But the firmware for iPhone 5S must meet the following criteria:

• Modifications of iPhone 4S, 5S, etc.

• Communication standard. While searching for the firmware file, an attentive user will notice that on the resources where they can be downloaded, they are divided into 2 groups - GSM and CDMA. Here you will need to select the first standard. CDMA gadgets do not have a SIM card tray, and this is the easiest way to identify them. The manufacturer decided to block such phones to work with only one communication company, so their price is much lower. But such devices cannot be found in Russia; they can only be purchased in America or China.

• iPhone models. This indicator is a alphanumeric character set indicated on the packaging and the back panel of the device.

Taking into account the above information, the user will definitely not go wrong with the choice of firmware. Of course, if you purchased a locked device, is it possible to reflash it? This is a question purely for specialists.

Download and install the “fresh” iTunes utility, if your PC does not have one. Better to do it with official resource Apple company

Blocking (disabling) the iPhone search function. To do this, you need to go to the iCloud settings and deactivate this option. If you do not do this, you will not be able to reflash the device via iTunes due to an error.

Make a copy personal information from the phone to another medium, since data may be lost during the operation.

Reflash iPhone via iTunes yourself

This procedure is done through next steps. The user needs:

1. Connect your phone to a PC or laptop (depending on what it works with and where the iTunes utility is installed). To do this, you need to use the original USB cable.
2. Run the utility manually if this does not happen automatically.
3. Go to the smartphone management page by clicking on its icon.
4. Hold down the shift button and then the recovery button. A window will immediately pop up in which you need to find the previously downloaded firmware. Its format is IPSW . If the utility does not detect a file with this format, it will inform the user that the recovery was unsuccessful.
5. Confirm your decision by clicking on the system update button.

Then the whole process will proceed automatically. The utility will erase all previous data and install a new operating system. The device will be in Recovery mode Mode. And its settings will be reset to factory settings.

The user can save time and not search the network for the firmware file, because it can be trusted to iTunes. However, the utility will install on the device not the version of iOS that is currently installed, but another version - the newest one available. If this is what the owner of an Apple phone needs, at the 4th stage you need to press the iPhone restore button (you don’t need to press any buttons on the keyboard).

Method to restore jailbroken iPhone

If your smartphone is jailbroken, you need to do the flashing yourself via DFU mode. This method is also recommended if the above methods fail for some reason.

So, to flash the device in this way, you need to act in accordance with the following instructions:

1. Press the home and power buttons, simultaneously, and hold down for 10-15 seconds. Then you need to release the power button.
2. Connect the gadget to your PC or laptop via the original USB cable.
3. As in the previous method, you need to press Shift and the restore button, select the file you are looking for and download it.

The procedure will automatically start and complete, after which you need to take the phone out of DFU mode and wait for the Apple logo to appear on the display.

iPhone update methods

This procedure can be carried out in one of 2 ways: using the iTunes utility or wireless network WiFi.

To use the utility and update iOS, you need:

1. Connect your smartphone to your PC or laptop.
2. Launch the utility and enter the iPhone management section.
3. Click on the update section (but not recovery, as in previous operations).
4. If your device already has newest option iOS, the utility will report this.

If the user has ready file firmware, don't waste time waiting for Atunes to download it. You need to press Shift, and then the update button and find the file in the system.

Wait for the process to complete, and then enjoy using the “new” smartphone. All settings and information that were on the device before the update will be saved.

To carry out a similar procedure via WiFi, the user must:

1. Activate the control center and click on the wireless network icon.
2. Go to settings, and then to the WiFi section and connect to any available network.
3. Return to settings, but now to the main ones.
4. Go to the software update section.
5. Wait for the check for new software to finish. If the utility finds a more recent version of iOS than is already installed on the user’s device, the display will prompt you to download and install it.

You need to agree to this proposal, and the process will start. Under no circumstances should you update with a jailbreak, as this can lead to system crash. The device may enter the “eternal apple” state or fall into a loop. The origins of this problem lie in the fact that the jailbreak for new versions of the operating system was released with a significant delay, and when the update is launched, it goes “into the void.” To update jailbroken gadgets, the manufacturer advises using exclusively the iPhone's restore button.

Reference. For the first time, the ability to update Apple devices was implemented on iPhones with iOS 5. It will not be possible to update the firmware via 2 and 3G connections, because Internet speed is too low.

Thus, owners of non-jailbroken Apple smartphones have no problems with independent firmware devices should not appear. All user actions in these cases are simple and understandable. You just need to connect the device to your computer and use the “services” of the iTunes utility. And those who have jailbroken devices need to act more carefully. To reset settings to avoid losing jailbreak, it is better to use specialized software, such as Semi Restore, rather than iTunes.

IOS 10 ON iPhone 5S - IS IT WORTH UPDATING, video:

Smartphone is an integral part of life modern man, and when it fails, many do not find a place for themselves. Then questions begin to arise, how to reflash iPhone and this is quite real. Most users will not bother solving the problem and will simply go to the service center, within a few minutes simple manipulations with the gadget you will have to shell out a round sum of money.

Why reflash your iPhone?

Quite often the cause is a simple failure of the operating room. iOS systems. Despite the general resistance of the OS to harmful influences, breakdowns still occur. Most often, the reason is the user, especially if he uses jailbreak and installs various pirated content.

Another likely situation is that you want to update iOS to a newer version, but other methods do not work. You can simply reflash the device and get rid of the pain. The procedure is performed in reverse order even more often when the user is somewhat disappointed new version and wants to return to the previous one.

The smartphone refuses to turn on or turns off/freezes during the boot phase. Perhaps the reason is not in the OS, but it’s worth checking this option first.

How to reflash an iPhone yourself? Preparation

It’s worth mentioning right away that the instructions on how to reflash an iPhone 4 are also valid for all other models and have no significant differences. The first step is to prepare the ground for replacing the system and download the firmware itself. Please note that it comes in .ipsw format, if another is present, then it may be a virus (other than an archive or image).

The firmware should be selected individually, and here there is a dependence on the iPhone version. It should also be taken into account that the smartphone is shipped worldwide, and the network in different countries may differ, so choose a typical OS with GSM or CDMA, otherwise there may be problems.

Among other things, the firmware version indicates the product model, the series is general information, and they are additionally divided into other categories. You can find out the model by turning the phone over, there is a technical information. After the word Model there is an alphanumeric code.

Now you should find the firmware itself, start your search with reliable sites, of which there are many on the Internet.

Flashing is not possible if the device tracking function is enabled on the smartphone, otherwise iTunes will display a corresponding error. In this case, you should go to the website https://www.icloud.com/#find, log in and disable the functionality.

The next preparation step is checking iTunes versions, it must be new, otherwise failures or errors may occur, and sometimes the process simply refuses to start. Typically, the version is checked automatically when the application starts.

You can flash your iPhone in several ways, using RecoveryMode or an alternative option - DFU mode. The first option is to restore the system in case of failures, an emergency mode to return the device to normal operation. DFU Mode is very similar to the previous option, but it allows you to flash the firmware not through the OS, but bypassing it, as it were. The function accesses the firmware, which allows you to perform the procedure when jailbreak is activated. Also used as an alternative to the first option if it did not help.

How to flash iPhone 5 RecoveryMode?

Let's look at how to reflash iPhone 5 yourself, that is, without contacting a service center. This instruction implies the completion of the previous stage of preparation.

1. Turn off the device;
2. Hold Home and connect iPhone to PC;
3. The computer must independently detect the device and that it is in RecoveryMode;
4. Launch iTunes if you haven't already done so;
5. If a window appears asking you to restore the gadget, confirm it. If a characteristic reaction does not occur, you need to go to the program and select the iPhone;
6. Next, hold down Shift (Windows) or Alt (Mac) and click on “Restore iPhone”;

1. Using Explorer, you must specify the previously downloaded firmware with the .ipsw extension;

1. The procedure is automated and does not require user participation.

How to reflash iPhone 6 DFU mode?

To perform firmware in all Apple gadgets DFU Mode should be activated. Apart from the method of going to the menu, the procedure has most of the same points.

1. Connect to the PC and disconnect the smartphone;
2. Now press Home and Power at the same time, holding for approximately 10 seconds. After this, release Power and hold the second key until the iPhone reacts appropriately;

1. Launch iTunes and select the device, then “Restore iPhone” while holding Shift or Alt;

1. Specify the location of the firmware file;
2. Wait until the end of the procedure and start the smartphone.

Now you can evaluate whether it is worth overpaying, quite a lot, for such a simple procedure, considering that the service center will perform it in exactly the same way. Even flashing it yourself the first time does not cause any significant difficulties, and subsequently it is completed in 20 minutes.

If you still have questions on the topic “How to reflash an iPhone yourself?”, you can ask them in the comments

Greetings to all readers of the computer blog site! The other day, a friend of mine approached me with a request to unlock his iPhone 5s. According to him, while he was drunk, he set a password on his phone (from his girlfriend), but in the morning he could not remember it. After several unsuccessful attempts entering the password, the iPhone was automatically locked.

When turned on, the message “ iPhone disabled! Connect to iTunes." When connecting to a computer, the problem was not solved - a password was still required.

In this article I will tell you how to unlock any Apple device - iPhone 4, 4s, 5s, 5, 6, 6s, 7, iPad, etc. We will remove the lock by flashing the firmware, i.e. Completely reset the phone to its factory state. Flashing an iPhone is a seemingly complicated procedure, but in reality it’s quite simple, so don’t rush to take your phone to a service center, but first try to do everything yourself.

The firmware will help solve any software problems with your phone. Essentially we will do full iPhone reset to factory condition as if we had just bought it. Let me warn you right away, we will need Internet access.

I unlocked iPhone 5, model a1429, but The firmware method is universal, and will work for all Apple devices − iPhone 4,5,6,7, and also iPad.

Most often, this article is read by people who forgot your phone password. In such cases, the iPhone/iPad displays messages like: “ iPhone is disabled. Connect to iTunes" or “Repeat in 24,000,000 minutes«.

However, you can try to flash the phone if there are any problems with your iPhone. For example, if your iPhone glitches, reboots, or does not boot and does not turn on at all— iPhone flashing can help you!

Alarm! When using this method all information on your Apple device will be erased. Be careful, and if you still hope to remember the password, look for other unlocking methods.

You do all the actions described below at your own peril and risk, and I do not bear responsibility for a damaged phone. Fortunately, the procedure is standard, invented by Apple itself, so go ahead! 😉

I will immediately upset those whose iPhone is linked to iCloud.

If you don’t have access to this iCloud, this method still won’t help you. After the firmware is installed, the phone will start asking for a password from iCloud. In this case, you can restore access to the phone only if you have the original box from this phone, as well as the sales receipt for it. All this will need to be sent to Apple, they will check the information and restore your access.

If you have neither a password nor a receipt, alas, you have a brick. Well, you can change it motherboard, or sell the phone for parts, which is basically the same thing.

How to flash any Apple device - iPhone 4, 5s, 5, 6, 6s, 7, iPad? Step by step instructions.

To begin with, you need download and install iTunes from the official apple website: apple.com/ru/itunes/download/

Installing iTunes should not be difficult for you, but just in case, it is described in detail in video at the end of the article.

So, we have the program installed.

First we need to switch the iPhone into recovery mode. It's very easy to do this:

Congratulations! You are logged in Recovery Mode!

Now let's turn our attention to the laptop screen. iTunes should launch automatically. If this does not happen, start it manually. You will see a window asking you to restore or update your iPhone:

Click the button " Restore«.

Next, most likely, a window will pop up asking you to install the latest version of iOS. After clicking the "Restore and Update" button all data on your iPhone will be erased, then downloaded and installed the new iPhone software. We think, then press this button.

A window like this may pop up:

The firmware download for the iPhone will begin from the Apple website. The download time depends on the speed of your Internet connection. The download progress can be monitored by clicking the icon in the upper right corner:

After completing all the steps, you will see a welcome screen on your iPhone:

Hurray, our iPhone 5 is unlocked! All you have to do is insert the SIM card and set it up as if you just bought it in the store!

iPhone is disabled. Connect to iTunes - how to unlock? [VIDEO]

I recommend watching the short video below. In it I talk about the process of unlocking the iPhone 5 in as much detail as possible:

Don't forget subscribe to my YouTube channel!

Error 4013 when restoring iPhone.

If you read further and are not happy about your “resurrected” phone, it means something didn’t work out for you. To be honest, it didn’t go smoothly for me the first time either. When you first try to restore an iPhone using firmware, at the “Waiting for iPhone” stage Happened unknown error (4013):

“B.., what the f..?!” … "Great!" - I thought. “If I encounter a problem, I can warn my subscribers about it!” I started looking for a solution. The forums were full of advice of various kinds. The option " Put the iPhone in the freezer and then flash it«:

I did not resort to such radical solutions as freezing someone else’s device, and decided to first follow the recommendations from the official Apple website.

When these errors appear, Apple technical support recommended 3 options: install latest updates Windows or Mac, change the USB cable (I also recommend trying to plug the device into a different USB port), or try restoring the iPhone on another computer:

Since I have many different laptops at hand (), I decided to go the third way, especially since on the first laptop due to the small volume hard drive there was a “stripped down” Windows 7. Of course, without any updates.

What do you think - After running the recovery procedure on another laptop, everything was successful!

If you encounter any other errors when restoring your iPhone, take a look.

If you have any questions or just liked the article, leave a comment below.

And also join