TVs. Consoles. Projectors and accessories. Technologies. Digital TV

How to update Windows 10 through Update Center. Update process. Using the “native” utility

class="eliadunit">

So that you don't have any problems withWindows 10 activation, it is necessary to follow a certain procedure for installing the new system. First of all, you must install Windows 10 through the update center, saving all files and settings, including license information. Only then can you perform a clean installation with partition formatting if you want to completely get rid of the old Windows versions.

General information

To upgrade to Windows 10 via Update, make sure your computer meets the following requirements:

  • stands on it licensed version Windows 8.1 or Windows 7 (Service Pack 1).
  • You have update enabled system and all suggested updates are installed.
  • You have reserved free receipt by pressing the button " Get Windows 10».
  • you got notification that Windows 10 files are already downloaded on your computer.

If you are still using Windows 8, then to upgrade to Windows 10 you must first update to version 8.1. You don’t have to worry about system requirements: if the “seven” works fine, then you can install Windows 10 without any problems.

If for some reason your computer is not suitable for installing Windows 10 (detected unlicensed copy product or non-conformity system requirements), then the utility offering to reserve the “top ten” will inform you about this.

class="eliadunit">

Update process

So, all the conditions described above have been met, the notification has been received, all that remains is to start the update process to the new operating system. At this stage, everything is also automated - Microsoft specialists tried to ensure that even beginners do not have problems.

  1. Open " Control Panel».
  2. Go to " Update Center».
  3. Click the button Getting started».

If there is no such button in the update center, then you need to wait a little. It is possible that the system files you backed up are still being downloaded. If it still doesn't arrive, try running a notification via command line using the request " updatenow».

You can monitor the installation progress via " Update Center" If necessary, you can stop downloading files - if you suddenly change your mind about switching to Windows 10.

The update process itself will take a couple of hours, and for the first time you can safely use the computer. Only at the final stages of configuration setup will the system reboot and become unavailable for operation. After a successful update, no activation is required - the product key will automatically be registered on Microsoft servers.

A free Windows 10 update is available today and is available for all PCs. licensed Windows 7, as well as 8.1, on which it was reserved in advance. However, this is not at all necessary, just like waiting for a notification about the opportunity to upgrade to Windows 10; this can always be done manually.
The procedure will be exactly the same, only you will not have to wait until the system prompts you to download the update. In addition, according to the information provided by the developer, not everyone will be able to update to Windows 10 in one day. You can update using the methods described below only from home and professional versions of Windows.

Launching an upgrade to Windows 10

If you have a licensed version installed on your PC Windows 7 or 8.1 , which has passed the activation procedure, you can upgrade to Windows 10, there are many ways to do this.

The selected update method will not affect your personal data in any way, as well as programs stored on your PC. Problems may only arise with the drivers of some devices, but this is easy to fix; you just need to download the necessary driver or run the disk that is usually included. There may also be compatibility issues with some programs.

You can download the new version on the Microsoft website Windows 10 Installation Media Creation Tool, which you can use to update your computer, or download a file that will allow you to perform a clean installation.

The program can be found on the page in various versions; there is a 32-bit version of the system and a 64-bit version. You need to download the option that matches the currently installed system. After downloading, the application must be launched, after which you will be prompted to update your computer. Let's talk in more detail about this method. When updating using a previously backed up copy in the " Get Windows 10"You will need to perform almost the same manipulations, with the exception of only a few steps that you will need to do before updating.

Update process

First, let's look at the steps required for a manual update. After you have selected “update now”, the automatic downloading of files to your PC that are required for installation will begin. After downloading last file the system will check and if everything is ok, execute “ Creating Windows 10 media"(for this you no longer need a separate drive, it is hard drive). Upon completion of this procedure, the installation of Windows 10 on your PC will automatically begin.


Now you must accept the terms and conditions of Windows 10, otherwise you will not be able to continue with the installation. Immediately after this, the program will begin checking for updates; this process will take quite a bit of time, after which you will be prompted to install the latest Windows 10 update on your PC. The main advantage this method The setup is that absolutely all data remains, as well as applications. If necessary, you can make changes to the list of saved elements. Click the button " Install».


IN full screen mode A new “Install Windows 10” window appears, after a while it will display a message indicating that the computer is rebooting. After this, all windows close, and you just have to wait until the computer reboots.


A window appears in front of you in which the file copying process takes place, as well as the Windows 10 installation procedure, during which the PC will be restarted several times. It is worth paying special attention to the fact that even powerful computer The installation process will take quite some time, so be patient.


Upon completion of this stage, you will be asked to choose your account Microsoft or enter your user account information.


Now you need to configure the basic system parameters, it is recommended to click " Use standard settings" If in the future you need to change the settings, you can always do it. In a new window you will be invited to familiarize yourself with the unique opportunities that the updated system provides you. For example, new applications have appeared for working with photos, music and of course films, many should also like Microsoft browser Edge.


The installation is complete, a Windows 10 login window appears in front of you, after which you need to enter your password and login. Now you need to wait a little while the system configures the basic settings, as well as various applications; after the procedure is completed, the desktop will be displayed. All shortcuts that were there before the update will remain in the same place.


Windows 10 is activated and completely ready for use, you can begin to get acquainted with the unique capabilities of the updated system.

Problems during update

Many users encounter various difficulties during the process of installing Windows 10 or updating it, which they report in the comments. We recommend that you familiarize yourself with them; perhaps there is already a solution to your problem. Now we will take a closer look at ways to solve some of the problems that prevent you from upgrading to the new one. Windows 10.
  1. If the update icon has disappeared, then you can perform the following manipulations:
    - You must enable the command line on your PC and be sure to use it as an administrator, then enter wuauclt.exe /updatenow - Press Enter and wait a few minutes, going to the Center Windows updates you will be able to see the current update download status. Upon completion of the download, the system will be completely ready for the update, all you have to do is run it and follow further instructions on the screen.
    If an error occurs 80240020 in the process of updating:
    - Go to the following path C:\Windows\SoftwareDistribution\Download and delete everything that is there;
    - launch the command line on the PC and only as administrator and enter wuauclt.exe /updatenow there and then press Enter.
  2. It happens that the update program itself, downloaded from the Microsoft website, crashes with some error; this is a fairly common problem. Now there are two ways to eliminate it, but they do not always work:
    - If Windows 10 managed to download this utility, then go to the folder at C:\ $Windows.~WS (it’s hidden) \Sources\ Windows run the file there setup.exe. Be patient, the installer may take about a minute to launch;
    - Sometimes errors occur due to an incorrectly selected region. To fix the problem, go to the Control Panel, click on regional standards, and then select a location. We look for the correct region and confirm the changes. Upon completion of the procedure, you need to restart the PC;
    - If Windows boot 10 broke in Media Creation Tool, then you don’t have to start all over again, you can just resume the installation. It’s easy to do this right away, include the setupprep.exe file, which is located in C:\ $Windows.~WS (hidden) \Sources\ Windows\Sources
  3. The problem with the update can be solved by launching it from the downloaded ISO disk A. To do this, you need to find and then download an ISO disk with the original version of Windows 10, and then mount it using the snail. run the image file and follow the instructions that the system will display during installation.
  4. When the upgrade to Windows 10 is completed, the system reports that it is not activated. If you updated from an activated Windows 8.1 or 7 system, but you just need to wait. The activation procedure will be completed soon, the servers are just overloaded at the moment. To perform clean install you need to update and wait for the system activation to complete. Only after this will you be able to install the same version of Windows 10; after installation is complete, it will be automatically activated.

Problems immediately after upgrading to Windows 10

In most cases, after updating Windows 10, everything works as it should, but it happens that certain drivers have not been installed, which is why some devices will not work. But you should know that, if necessary, you can download them from the manufacturer’s website or use the disk that usually comes included.
The second, but no less important detail is if you did not like the downloaded Windows 10 update and you want to return to the previous version, with all files and settings preserved. This can be done within a month of use. To do this, click on the notification icon located in the lower right corner, and then click on the item " All parameters", then " Update and Security", then click restore and return to the previous version of Windows.

Including even pirated copies- True, the system will not become legal in this case, but it will be upgraded without problems.

In most cases, the system, be it Windows 7 or Windows 8/8.1, will offer you to update to Windows 10 automatically, but if for some reason this does not happen, the update process can be started manually. Just a couple of years ago it was possible to install the system from a bootable DVD or flash drive, but today the easiest way to do this is via the Internet - you don’t have any problems with it, I assume? Namely - through the Microsoft website

The program is available on the page https://www.microsoft.com/ru-ru/software-download/windows10 in two versions - 32-bit and 64-bit, you should download the version that corresponds to the system installed on your computer or laptop .

Here you will find two options: either run a small windows update program, which will automatically install on your Windows computer 10 (preserving almost all your programs and documents), or download the full “image” installation disk system, which can then be turned into a bootable “flash drive” and install Windows completely. But we will consider this option a little lower, for now I will say that in this case you will also need serial number Windows, which can be bought here, in the Microsoft “store”.

The process of updating windows 7/8.1 to windows 10

Once you run the installer, you will be given the choice of “Upgrade this PC now” or “Create installation media for another computer.” When upgrading from a backup copy in "Get Windows 10", everything will be exactly the same, except for missing the first few steps before actually installing the update.

It must be said that upgrade windows 7 to windows 10 Without losses it is not always possible. For example, if you already have 32-bit Windows 8 installed on your computer, you won't be able to upgrade to 64-bit Windows 10. More precisely, not so: the system will be updated. But you will lose everything installed programs, except standard applications Windows, and in new system only yours will move personal files- documents, photos, music. In the most difficult cases (for example, if you install a Russian version of Windows over an English version), the ability to update will be completely blocked - Windows will be installed completely, having first copied the previous version along with all your documents to Windows folder. Old on the hard drive.

By selecting “Update your PC now”, the automatic download will begin Windows files 10 to your computer, after which “Verifying downloaded files” and “Creating Windows 10 media” will occur. Upon completion, the process of installing Windows 10 on your computer will automatically start (the same as when using the backup method).

The process of updating to Windows 10 almost completely repeats the usual installation of Windows 10 - except that it goes much faster, and more beautiful pictures are shown during installation. However, experts recommend updating Windows (that is, installing new version over the old one) only in cases where the system works flawlessly. Otherwise, there is always a chance that the errors and failures accumulated by your old OS will be inherited by the new one. Still worth a try. After all, reinstalling all programs, which will inevitably follow the complete demolition of the operating system, will take you several hours, and reinstalling Windows over Windows - about forty minutes.

Immediately after you can upgrade Windows 7 to windows 10 begins to actively download updates and patches from the Internet, as well as new drivers - for the video card, built-in sound, and so on. This process, in fact, does not require your intervention and goes completely unnoticed. background(unless in the future the computer will be warned about the need to reboot).

But if you want to unveil this mystery, there is nothing easier - click on the Start button in the lower left corner of the screen and select the menu Settings ⇒ Updates and security ⇒ Windows Update. If desired, the process of checking for updates can be started manually, and by going to the menu Additional options, you can enable update download mode not only for Windows, but also for others Microsoft programs(for example, Microsoft Office package).

After January 14, 2020, Microsoft will stop releasing security updates technical support Windows 7: To keep your PC serviced and protected with monthly security updates, you have the option of a free upgrade to Windows 10.

For Windows 7 and 8.1 users, the planned annual period free update Windows 10 officially ended on July 29, 2016.

Immediately after this date Microsoft company launched a website designed for users with disabilities using assistive technologies for Windows. However, it also stopped working on January 16, 2018. However, with the help Windows utilities 10 Upgrade Assistant, which is still available for download from the official servers, anyone can still upgrade to Windows 10 for free.

A phased update to Windows 10 November 2019 Update (version 1909) is currently available.

To take advantage of the free update offer, you must follow these steps:

1. For a trouble-free installation, you must install everything latest updates for your current system.

2. Download a special version of the Windows 10 Upgrade Assistant utility, with which you can check your computer’s compatibility and update your operating system Windows system 7 SP1 or 8.1 for free.

3. Launch the utility and follow the onscreen instructions.

4. The update may take from one to several hours depending on your computer configuration and Internet connection speed. Once the update is complete, the OS will be installed Windows 10 (version 1709).

5. Check system activation. Press combination Windows keys+ I to open the application Options, and go to Update & Security > Activation.

Other ways to upgrade to latest version You can look at Windows 10 in the article:

Windows 10 can be activated using product keys from Windows 7 and 8.1.

If you are the owner of the key for the OEM version of Windows 7 or 8.1, then upon execution you will be able to go through the activation procedure in the application Settings > Update & Security > Activation > Change Product Key.

Starting July 29, Microsoft is gradually updating users' PCs to Windows 10, which means some are still in the process of waiting their turn to receive their free upgrade. But you don't actually have to be patient and wait your turn like we did. You can upgrade to Windows 10 yourself right now, without waiting for the update to automatically download and install.

How? It's very simple - you can get Windows 10 immediately using the Media Creation Tool, which you can download from the official Microsoft website. This is a completely legal and legal way to upgrade to Windows 10 manually. The process will take very little time, and it will work regardless of whether you have backed up Windows 10 before or not.

Reminder: Only people can get a free copy of Windows 10 Windows users 7 and 8/8.1 with current license keys. All other Windows users (including pirated versions of Windows 7, 8 and 8.1) will be required to obtain an activation key. And for XP and Vista users, there is no option to upgrade to Windows 10; instead, they need to perform a clean installation.

In this article we will look at how to upgrade from Windows 7, 8/8.1 to Windows 10 without waiting your turn - right now.

Step One: Backup

As with any other operating system upgrade, you should take care backup copy your files and data (during the update process, you can keep your files and data as is, this is described in the third step, but in addition to this, we recommend that you manually make copies of some of the most important files).

Generally, backup is good experience, and this is especially important if suddenly something goes wrong during the manual update process. In addition, you may decide to go back to the previous OS if you don’t like Windows 10, and you may find that your system is not exactly the same as it was before.

(At the time of writing this article, from reviews of the reverse transition to Windows 7 or 8/8.1, we can say that the results of the reverse transition to the previous OS will not be ideal: files and data may be lost and additional actions will be required, such as deleting unnecessary things, reinstalling programs, etc.).

Step Two: Download Media Creation Tool

Now that you're covered and ready to upgrade, head to the Windows 10 Download page and download the Media Creation Tool 32-bit or 64-bit.

Don't know which version to choose? Select the 64-bit version if you are already using a 64-bit Windows 7 or 8/8.1 operating system. Accordingly, the 32-bit version if you already have 32-bit Windows 7 or 8/8.1. You can find this out from the properties of your system (right click on the icon My Computer > Properties.)

Step Three: Launch Media Creation Tool

Launch the Media Creation Tool and select "Update this PC now" to begin the upgrade process.

The process will begin Windows downloads 10. After this, you must accept the license agreement and select what you want to keep when upgrading. By default, you are prompted to install Windows 10 while keeping your personal files and apps. Media Creation Tool will show you a confirmation of the settings you have chosen, if everything is correct click “Install”.

If you want, you can change the saving options by clicking on “Change components selected for saving.”

The Windows 10 installation (update) process will begin, which will last from 15 to 30 minutes.

Step Four: Finish Installation

Once the update is complete, you can verify that your copy of Windows 10 was activated: Start > Settings > Update & Security > Activation.

If you find out that you don't like Windows 10, you can roll back to your previous one. operating system(although keep in mind that the rollback results, as mentioned above, according to user reviews are not always ideal, and can bring problems with them).

To do a rollback, go to: Start > Settings > Update & Security > Recovery and select the middle option (for example, “Return to Windows 8.1”). This option is only available for 30 days after upgrading to Windows 10, so make sure your decision to downgrade to your previous OS doesn't take too long.

Were you able to upgrade to Windows 10? Or are you having problems? Let us know in the comments.



Share with friends:
Related publications