What does it mean to map a network drive? Connecting a network drive using NET Use. Connecting a drive via the command line

A network drive is a tool used to open access to your resources within local network. Connecting this element can be done in several ways, differing in complexity and software involved in the procedure. You can find out about them further.

Using network drives will significantly speed up work and navigation for users who frequently use the network.

How to map a network drive in Windows

Via "Computer"

If you have completed all the steps described above correctly, then a separate disk should appear in the system, which can now be used as a network disk.

For the network drive to work properly and for other users to access it, the computer where it is located must be turned on and connected to the local network.

Via command line

• net use– this command is used to check existing network connections and disks. After entering it, you will be able to find out which letter indicates the active network drive, remote address and other information.
• net use W:\serverdoc– with this command you can create a new network drive. In the system it will be designated by the letter W, and the doc folder located on the server server will be used as the file directory.
• net use W: \serverdoc /user:DomainMyPC 12345678– this command is also used when creating network drives, but with advanced parameters. It indicates that a disk will be created with the name W, with a directory for storing files in the doc folder on the server server. The MyPC domain Domain record will be used as the account user. A password will also be set on the network drive - 12345678.

Thus, using just 3 commands, you can independently create and edit network drives if necessary.

Through group policies

How to map a network drive on Mac OS?

After completing all the above procedures, you can configure automatic start network drive when you turn on the computer under guidance Mac systems OS.

You can clearly see the instructions for connecting a network drive on Mac OS in the following video:

How to configure cloud storage as a network drive?

The storage supports working with WebDav

Connecting Yandex.Disk storage can be implemented in a manner similar to setting up regular folders. To do this, launch Explorer, find the item “Computer” or “This computer” and select the item “Map network drive”. After this, a window will open in which you will see possible options connections:

It is important to note that establishing a connection with the cloud storage may require certain time, so you will have to be patient and wait.

Be sure to check the “Remember credentials” checkbox. Otherwise, you will have to re-enter them every time you start the system.

The storage does not support working with WebDav

Be sure to remember that the password and login for your account in the DAV-pocket lab program itself must be different from your data that is specified in the Google Drive storage.

We've figured out Yandex.Disk and Google Drive, but what if you work with Dropbox? Despite the popularity of this repository, there are no special bridge programs for it. What to do in this case? You can use a universal client called CarotDAV. It allows you to connect several network drives from various cloud storages at once. To do this, simply select the required service and enter your login information:

Extended type error when mapping a network drive

The most common cause of such failures is an incorrect date and time. Incorrect data can cause conflicts in the network, which leads to such problems. To solve the problem, simply set the correct date and time.

If this does not help, you should contact a technician who specializes in working with local networks. Independent attempts to correct the situation can lead to irreversible consequences - loss of important data, failures in the network itself, etc.

Mapping a network drive is a fairly simple and safe procedure that can be carried out by almost every user, but for this you need to follow a certain sequence of actions. Incorrect connection can lead to malfunctions, which must be remembered.

A network drive is logical drive(folder) created for sharing files by PC users. The disk can be located on a PC, server, or network device data storage using the same local network.

A network drive is often created in enterprises and educational institutions storing documents on servers, providing more storage space and backup files. However, as the amount of data grows, the disk becomes relevant on the home network.

To connect a network folder, you must transfer all PCs connected to it to a common workgroup.

Step 1. Press the key combination Win+R. Type sysdm.cpl into the menu and click OK.

Step 2. Click the Computer Name tab and click Change.

Step 3. Type name in "Is a member" " working group» in English letters. You can choose any “Computer name” or leave it the same. Click "OK".

Step 4. Restart your PC for the changes to take effect.

Step 5. Do it Steps 1-4 on all computers located in shared network, specifying the same workgroup name for them.

Setting up folder access

Before making a connection, you need to create a folder on the selected device located on the public network, naming it in English letters.

Step 1. Click on the created network folder and select “Properties”.

Step 2. Click on the "Sharing" shortcut and click "Sharing".

Step 3. Select “All” from the drop-down list and click “Add”.

Step 5. Click "Done".

The folder will be shared.

Disable network credential entry

When connecting online, it is often necessary to disable the prompt for network credentials in Windows 7, 8 and 10 (this setting is not required on XP). To disable the request, you need to change the PC access settings.

Step 1. Click on the network icon in notifications (bottom right of the screen) and select “Control Center...”.

Step 2. Click "Change sharing...".

Step 3. Check in all profiles (by opening the drop-down list) whether the points for network detection and general access are set.

Step 4. Scroll your mouse wheel down the list of permissions and select “Disable password protection.” Click “Save Changes.”

Reference! To connect to a network share, you may also need to disable and then re-enable the Windows firewall.

Connecting a network drive

Step 1. Open the Computer folder by double-clicking.

Step 2. Click “Tools” – “Map network drive” ( in Windows XP).

Click the “Connect…” button at the top of the window ( in Windows 7).

Click the “Connect…” button on the disk image on the ribbon interface ( on Windows 8 and 10).

Step 3. Select the folder letter and type the path consisting of two slashes " \\ ", PC name followed by a slash " \ " and the name of the folder itself (with an underscore instead of a space, as shown in the "Example" in the screenshot).

Note! To connect, instead of the PC name, you can type it, for example: \192.168.1.100foldername.

Step 4. If the path to the folder is unknown, you can click “Browse...” by opening the network tree with the mouse, clicking on the desired folder and clicking “OK”. If a permanent connection to the folder is required, check the “Restore connection...” checkbox.

If other credentials are required to connect, check the “Use other credentials” checkbox. The password and login will be requested after clicking “Finish”.

Click "Done". The disk will be connected.

In a domain environment, you probably won't need to connect with different credentials because... The current domain login most likely already has access to the server.

For example, if there is file server NAS and you need to connect its folder as a network folder, you will probably need to enter the credentials installed on the NAS, since the credentials Windows data will not work.

Connecting a drive via the command line

Step 1. Press Win+R. Type cmd command and click "OK".

Connecting Yandex.Disk as a network folder

When installed on a PC, it organizes a folder on it for storing copies of files transferred to the server. This is quite inconvenient if the backed up files are too large and take up a lot of space on the PC.

At the same time, Yandex.Disk supports WebDAV, allowing you to connect the service as a regular network folder without saving files on your PC.

Step 1. Select network drive connection ( see above) and click on the link “Connect to the site...”.

Step 3. Enter address: https://webdav.yandex.ru and click "Next".

Step 4. Select a name for the connection and click “Next”.

Step 5. Enter a name and password to connect to the service.

Important! The item indicated by the arrow in the photo must be marked only if one account is used for the service!

Step 6. Check the “Open...” checkbox and click “Finish”.

The Yandex.Disk folder will open.

A location will appear in the “Computer” folder that can already be used.

Yandex.Disk will be connected as a network folder.

How to connect your computer to Wi-Fi

To connect a computer to a point Wi-Fi access will need to be purchased Wi-Fi adapter, or connect an existing adapter to the network.

Step 1. For turn on Wi-Fi On a PC, click on the network in the notifications (bottom right) and select “Network Center...”.

Select “Network and Sharing Center...”

Step 2. After turning on the adapter, click on the network and select “Connect” to the desired Wi-Fi network.

Step 3. Enter the access point password and click OK.

A wireless Wi-Fi connection will be established.

If the disk is 100% loaded in Windows 10

In Windows 10, sometimes there is an error that leads to congestion hard drive 100% At the same time, PC performance decreases until it freezes completely. If the computer is under Windows control 10 has become very “ ”, it is necessary to look at what is causing this situation.

Step 1. Press Ctrl+Shift+Esc. The "Task Manager" will launch. Click on the “Processes” tab and view the status of the CPU, memory, disk and network.

If the disk is 90-100% loaded, you need to take actions to reduce the load on it. Most often, high HDD load is associated with the system “looping” on file indexing, carried out to speed up access to them.

Step 2. Click on the magnifying glass icon next to the “Start” button and type cmd in the line. Click on the found “Command Prompt” utility and select “Run as administrator”.

Step 3. Type the command in the window that appears: NET STOP "Windows Search" by pressing Enter.

Step 4. Execute Step 1 this section and see if the load on the HDD has decreased. If the load has not decreased, disable the indexing service completely.

Step 5. Press Win+R, type services.msc in the window that opens and press Enter.

Step 6. Click on Windows service Search by selecting Properties.

Step 7 Click Stop, then select Disabled. Click “Apply” and “OK”.

Step 8 Execute Step 2 this sub-item and in the window that opens, type the following commands to disable the Windows diagnostic service, pressing Enter after each command.

Step 9 Without closing the previous window, type the following command, which disables the SuperFetch service, which improves the launch of frequently used applications, by pressing Enter. In practice, the SuperFetch service often causes high load on the HDD: net.exe stop superfetch

Step 10 Without closing the previous window, type the following command to disable the service automatic update Windows by pressing Enter: net stop wuauserv.

Also enter the following command by pressing Enter: sc config wuauserv start= disabled.

Step 11 Without closing the previous window, type a command that disables the paging file if the main disk in the system is solid state drive SSD by pressing Enter. Swap file on SSD drive sometimes the HDD loads 100%: wmic pagefileset where name="C:\pagefile.sys" delete(Where: name="C:\pagefile.sys"– file location)

Step 12 Without closing the previous window, type the following command to check and correct errors on the HDD by pressing Enter. To complete HDD check, the computer will need to restart: chkdsk /F /R

Step 13 After reboot Windows execute Step 1 this section and see if the load on the hard drive has decreased.

Disabling these services in most cases allows you to get rid of high HDD load.

Video - How to add a network drive in Windows 7,8,10

So, first of all, let’s define what a network drive is and why it is needed. A network drive is almost the same as a regular one. hard drive, which is on the computer. But its main difference is that it is physically located on another computer or server. For uninitiated users, a network drive will not be any different from the drive that is installed on their computer.

The only thing they may notice is that the speed of writing or reading data from a network drive will be significantly lower. But this will depend on the speed of the local network. Most often I use a network drive in large organizations where I work in programs with large databases. The database itself lies on the server, and users only have a client and they connect to the database through a network drive. It's very convenient and safe. But it is possible to connect a network drive simply to exchange documents between computers.
In order to connect a network drive you need to perform several simple steps that in all operating systems ah Windows are almost the same. IN in this example We will connect and disconnect a network drive in Windows 7.

Let's open my computer.

Enter the address of the network drive and select the volume letter. Check the box next to Recover at login. This is necessary so that the network drive is connected every time the system starts. If you don't check the box after a reboot, your network drive will disappear.

Click ready. After which your network drive should open.

Next, let’s go into my computer and check if the network drive appears underlined in red. That's all we have connected to a network drive. In order to disconnect a network drive, you need to right-click on it and select Disconnect, then click OK.

Now you have learned how to connect and disconnect network drives. You can connect any number of them. Agree, everything is not so difficult.

Shared folder on a network drive Windows 10

So, how to map a network drive on Windows 10? We already know how to create it, but it’s not very convenient to search for the required shared folder in the network environment, especially if there are a lot of computers. It is much easier to have it appear as a separate drive that appears along with your “C” drive when the system boots.

To connect a network hard drive on Windows 10, the first thing you need to do is allow sharing of files and folders on your computer. To do this, right-click on the “Start” menu and go to “ Network connections»

Here in the left column click on “Change settings” public access»

• Turn on network discovery
• Enable file and printer sharing
• Let Windows manage your homegroup connection

Mapping a network drive Windows 10

This was the preparatory stage - now let's move on to the main question, how to connect a network drive in Windows 10?
To do this, you need to open Explorer and in the left column, where the tree of drives and folders is, find the “My Computer” link - right-click on it and select “Map network drive...”.

In the window that pops up after this, select the letter for our future network Windows disk, for example "X".

After selecting the folder, leave the “Restore at logon” checkbox so that you don’t have to create it again every time you turn off the computer. And click “OK”.

Now, when you go to “Computer” in Explorer, among other system hard drives we will be able to see the “Z” drive in the “Network Location” section. You can get to it provided that the computer on which this network drive-folder is located is turned on.

Mapping a network drive on Windows XP

The technique for connecting a network drive on Windows XP is similar to that already described above. Therefore, we will describe here the connection method directly from the section “ Network environment».

Go to “Start > Network Neighborhood” and find the one we need shared folder on one of the computers on the local network. Right-click on it and select the “Map network drive” menu item. You can also simply top menu select “Service” and select the same section.

Now if you go to “My Computer”, you will see hard drives, and also network folders, connected as network drives, indicated by separate icons.

That's all. For those who have not yet understood what it’s like, here’s a video:

Thank you! Didn't help

Today, when prices are computer equipment have become more or less acceptable, every family member can get their own computer. There is nothing to say about small and medium-sized enterprises; the use of several computers connected into a single local network is commonplace. Naturally, in such conditions, users often have to exchange files while working. Use removable portable drives is not very convenient, so operating system developers have implemented such a feature as creating a network drive. Essentially this resource represents a directory or a separately created logical partition to which it opens, i.e. Hosts connected by a local network can connect. Very rarely, network drives on a home PC are created for access from the global network, for example, when the machine is used as a mini-server; generally, shared folders on cloud services are used to provide unified access to user files from the Internet.

Today we will learn how to create and add a network drive on the local network. The main distribution computer is usually the administrator's computer, but it can also be any other PC on the network.

Sharing

It all starts with creating an ordinary folder with unusual properties. Our example resource will be called WorkFolder. Create a folder with a suitable name in the location you need, open its properties, switch to the “Access” tab and click the “Advanced settings” button.

In the new dialog box, check the “Share…” checkbox, set, if required, the number of concurrent users accessing it, and then click “Permissions.” By default, everyone has read-only permission, if you want other users to be able to edit files on the disk and write their data to it, change the permissions accordingly. Save the settings one by one.

At the last stage of saving, in the properties window you should see the message “Shared access available” and the path itself, starting with two slashes.

Now, by clicking the share button, add in the window that opens users who will be able to access the shared folder on their PCs, otherwise they will receive network error, the description of which is presented in the screenshot below.

At this stage, the basic configuration of the network drive ends. Next step– network discovery check. If your network is defined as private, discovery should be enabled by default, but if it is defined as public, it will most likely need to be opened. Execute the command in the Run window control /name Microsoft.NetworkAndSharingCenter, and then click on the “Edit” link on the left additional options public access."

Activate the "Enable network discovery" radio button in the current profile and apply the changes. To be able to connect a network drive, the manipulations done should be sufficient; if the latter then does not want to connect, try changing the network mode.

Adding a network drive

You can connect the newly created resource in different ways, including through the usual CMD console, but we will consider the simplest option. Right-click on the “This Computer” shortcut (no matter where) and select “Map network drive” from the menu.

In the window that launches the wizard, select a letter for the future resource, be sure to check the “Use other credentials” checkbox, otherwise other users will not even be able to see it on their computers.

Using the browse button, select the folder for which you set up sharing.

After clicking the “Finish” button, Windows will ask for your current login and password.

The corresponding section should also become visible in the main workspace of this computer.

To turn off network resource Right-click on it and select “Disable” from the menu. You can also select it with the mouse and select “Disconnect network drive” from the Network ribbon menu.

Connect by name or IP address

There are also other ways to connect a created and configured shared resource, but they are less convenient. For example, instead of searching for it through browsing, you can specify its symbolic or IP address in the connection window field. The symbolic address is specified in the folder properties, the IP in the adapter properties “Local Area Connection” (IPv4 address parameter).

The same address can be obtained from the command line by running the command ipconfig /all(the data will be located in the section of the same name).

Using the Command Line

And finally, let's see how to map a network drive in Windows 7/10 using Command CMD lines or the PowerShell console, perhaps some will find this method even faster. The general command syntax looks like

net use \\ComputerName\ShareName[\volume]
username]

Here drive is a free drive letter, and \ComputerName\ShareName– path to the shared folder. Let's connect our WorkFolder folder from the desktop as a network drive, for which, in a line launched with administrator rights, run the following command:

net use Z: //DESKTOP-8CS7OLG/WorkFolder /user:compik 11111

Parameter /user necessary so that the system does not request authorization. The string element “compik” in this example is the name of the computer administrator, and “11111” is his current password. To make the network drive permanently connected, and not just during an open session, you can add the key to the end of the command /persistent:yes.

To disconnect the disk, run the command net use z: /delete, where z is the drive letter.

Unfortunately, in the Windows 10 we tested, when connecting with the net use command, the corresponding volume was not displayed in the “This PC” section, remaining accessible from the Explorer navigation bar.

So, now you know how to set up a network drive, but these, of course, are only general recommendations. Practice shows that in the process of connecting this type of resource, you often have to deal with various errors, of which the most common is “Network path not found.” Failures may be caused by problems with settings network adapters, with drivers, parameters network security and so on. In such cases, problems are usually resolved privately based on the identified cause.