Wireless room thermostats TEPLOCOM for heating systems. Wireless room thermostats TEPLOCOM for heating systems Types of room thermostats

Wireless room thermostat consists of a thermostat, which is located in the living room and a receiver, which is installed near the boiler. The signal is transmitted via a radio channel, and the thermostat is powered by batteries. There is no need to lay wires to this thermostat, so it can be placed in the room in any convenient place, this is especially true if installation is carried out after repair work in the house.

TEPLOCOM wireless room thermostats use two-way communication between the thermostat and the receiver. Unlike analogs, the thermostat not only transmits a signal to the receiver, but also waits for a response, and only then displays the status, which increases the reliability of the system.

The frequency of 868 MHz is used for signal transmission, which provides a number of advantages:

The 868 MHz frequency is less used, so there is less interference and "false positives" that often occur on the 433 MHz frequency
Increased range
Transmitters operating at 868 MHz consume much less power than their higher frequency counterparts.

TEPLOCOM thermostats use a highly sensitive temperature sensor with a small error, which allows for maximum control accuracy.

Peculiarities. TEPLOCOM TS-2AA/3A-RF provides

Wireless RF connection
Two-way communication between receiver and thermostat for increased reliability
LCD display
Room temperature display
Relay status indication
Low battery indication
Operating mode indication
Availability indication wireless communication
Temperature calibration
Setting maximum and minimum temperature limits
Setting night mode (NSB)
Setting the hysteresis value
Pump protection function
Working with normally open or normally closed logic
Direct connection to a thermal drive or boiler.

TEPLOCOM TS-2AA/3A-RF Wireless room thermostat
The thermostat is powered by two AA batteries, 2 pcs. Receiver power supply ~100-240V, 50Hz. Wireless signal frequency 868 MHz. The wireless connection radius in open areas is up to 100m. Relay contacts up to 250V, 3A. Temperature adjustment from 5°C to 35°C. Hysteresis ±0.1°C. LCD display. Indication of room temperature. Boiler status indication. Low battery indication. Operating mode indication. Indication of the presence of a wireless connection. Temperature calibration. Setting maximum and minimum temperature limits. Setting night mode (NSB). Setting the hysteresis value. Pump protection function. Operation with normally open or normally closed logic. Direct connection to a thermal drive or boiler.

Features of TEPLOCOM TS-2AA/3A-RF

TEPLOCOM TS-2AA/3A-RF provides:

LCD display
Room temperature display
Boiler status indication
Low battery indication
Operating mode indication
Wireless connection indication
Temperature calibration
Setting maximum and minimum temperature limits
Setting night mode (NSB)
Setting the hysteresis value
Pump protection function
Working with normally open or normally closed logic
Direct connection to a thermal drive or boiler.

To ensure comfort and save energy resources when operating an individual heating system, the Bastion company has developed a line of thermostats and heat controllers under the TEPLOCOM brand.

A room thermostat is a device for regulating and maintaining a comfortable room temperature. The user sets the desired comfortable temperature in the room, and the thermostat, controlling the climate control equipment, maintains the set value. Using a room thermostat increases comfort and provides significant savings. Depending on the type of room thermostat, you can achieve energy savings of more than 30%

Types of room thermostats

Mechanical room thermostat

A mechanical thermostat is based on a temperature-sensitive element that changes its mechanical properties under the influence of temperature. By expanding and contracting, the temperature-sensitive element closes or opens the relay, thereby turning the heating equipment on or off. The disadvantages of a mechanical thermostat are a very large error, lack of flexible settings, no indication and no economy mode. A mechanical room thermostat does not allow you to achieve maximum comfort and great savings.

Electronic room thermostat

An electronic room thermostat is the most modern way to regulate temperature. It is based on a temperature sensor and an executive relay. The electronic thermostat provides high accuracy maintaining the temperature, indicating the temperature and state of the boiler, the ability to enable an economical mode, the ability to program, which allows you to maintain maximum comfort and savings.

TEPLOCOM electronic thermostats use a highly sensitive temperature sensor with a small error, which allows for maximum control accuracy.

All TEPLOCOM thermostats have an anti-freeze function; in any mode set, the thermostat will give a signal to turn on the boiler when the temperature drops to 5 °C.

Programmable room thermostats allow you to achieve greater comfort and savings. A programmable room thermostat automatically changes the temperature according to a schedule. For owners of a country house, a programmable thermostat will maintain an economical heating mode on weekdays, and before arrival it will switch to warming up mode in advance.

Bastion programmable thermostats offer additional functions:

Pump protection function. In the summer, when the heating pump is not used, in order to avoid its souring, the thermostat once a day gives a signal to turn on the pump for 15 seconds. Thus, periodically turning the thermostat extends the life of the heating pump.
Function for setting minimum and maximum value temperature. TEPLOCOM thermostats are designed in such a way that it is convenient for the user to adjust the temperature at the touch of a button, but to protect against children in TEPLOCOM programmable thermostats it is possible to set a limit for rapid temperature control.
Vacation function. When leaving, the user sets the number of days of vacation and the temperature value during the vacation. At the end of the holiday, the thermostat will go to the main program.

Programmable room thermostat. Powered by two AA batteries, 2 pcs. Relay contacts up to 250 V, 8 A. Adjustment temperature from 5 °C to 35 °C. Hysteresis ±0.5 °C.

Bastion programmable thermostats offer additional functions:

Pump protection function. In the summer, when the heating pump is not used, in order to avoid its souring, the thermostat once a day gives a signal to turn on the pump for 15 seconds. Thus, by periodically turning the thermostat, it extends the life of the heating pump.
Minimum and maximum temperature setting function. TEPLOCOM thermostats are designed in such a way that it is convenient for the user to adjust the temperature at the touch of a button, but to protect against children in TEPLOCOM programmable thermostats it is possible to set a limit for rapid temperature control.
Vacation function. When leaving, the user sets the number of days of vacation and the temperature value during the vacation. At the end of the holiday, the thermostat will go to the main program.

Create an individual schedule

TEPLOCOM thermostats use a highly sensitive temperature sensor with a small error, which allows for maximum control accuracy.

Peculiarities. TEPLOCOM TS-Prog-2AA/8A provides

Large LCD display
Room temperature display
Boiler status indication
Low battery indication
System fault indication
Real time clock
Temperature calibration
Setting an individual program for each of the 7 days of the week
Setting maximum and minimum temperature limits
Setting the hysteresis value
Pump protection function
System frost protection function
Vacation function
Temperature lock function
Working with normally open or normally closed logic

Product characteristics

Basic functionsconstant temperature, programmable (temporary temperature reduction limits)

Automation type electronic

Brand Teplocom