Asus Rt N12 Vp B1 Reset Settings. Asus password, how to find out the router password and how to reset it if you forgot Asus rt n12 reset to factory settings

The Asus rt-n12 router is a fairly popular budget router that successfully implements everything necessary for simple home network functions. The device is a portable point WiFi access at speed information exchange up to 150 Mbit, while the device supports the common communication standard 802.11n with operating frequency 2.4 GHz and is equipped with 4 LAN ports for “hard” connection of local computers.

Asus rt-n12 router: indicators and connectors

The front panel of the router contains seven LED indicators:

1 - power indicator (Power);

• - off – power is not connected;
• - steady green light means the system can be used;
• - flashing quickly - process.

2 - WiFi wireless network status indicator;

• - “off” – no power (or the network is disconnected);
• - lights up solid green – the system is ready to exchange data via a wireless channel;
• - blinking – data is being transmitted (wireless network).

3 - indicator of connection to the Internet (WAN);

• - “off” – the Internet does not reach the router from the provider (there may be problems on the line or the service has been suspended for non-payment);
• - lights up steadily – active connection to the Internet;

4 - LAN connection indicators (LAN ports 1-4);

• - “off” – network cable not connected (or no electricity);
• - on – the corresponding port is occupied by an active connection external devices to the network via Ethernet cable;
• - blinking – data is being transmitted (via cable).

The rear panel is equipped with several connectors for an RJ 45 connector and switches:

• - one separately located WAN port (for connecting an Ethernet cable);
• - LAN1-LAN4 connectors (connecting network devices);
• - one round connector for connecting the power adapter;
• - standard power button;
• - WPS button for quick authorization in the home network;
• - button to reset the router to factory settings (hold for 7 seconds);

How to connect Wi-Fi router asus rt - n12

It’s quite simple to install and configure the connection to the asus rt n12 router yourself:

• - connect the power adapter plug to the DC In socket located on the back panel of the router;
• - connect the power supply to a power supply with a voltage of 220 V;
• - for initial setup, use a “hard” connection of the asus wireless router access point to the computer via an Ethernet cable (to avoid wireless interference);
• - connect the Internet cable provided by your provider to the WAN socket of the asus rt n12 router (if you need to connect this port to the LAN connector of the modem);
• - connect the LAN port of the router to the connector of the network card of a “classic” computer using an Ethernet cable from the “basic” set of the router;

• - if you have a TV set-top box, also connect it to the LAN connector of the router;
• - turn on the power button.

This completes the installation and connection of Wi-Fi asus router rt n 12 are completed - the device is completely ready for use. Step-by-step setup The modem is accessed through the built-in web interface of the device, which can be accessed through any Internet browser installed on the computer.

To enter the router settings, enter the combination of numbers 192.168.1.1 in the address bar and enter the authentication data in the window that opens.

By default, the login and password “admin/admin” is used.

If the router was in use before, you should first reset the settings of the asus rt n 12 router to factory settings according to the instructions in the final part of this article.

Setting up an asus wirelessroute rt n12 router for Rostelecom

To set up wifi router asus rt n 12 to connect to the Internet through providers such as Rostelecom and Dom ru, go to the router settings, find the “ tab Additional settings" and select "WAN" here.

At the top of the window, set the following Internet connection settings:

• - WAN type – you must select PPPoE from the drop-down list of connections;

Most Rostelecom subscribers use PPPoE connection to the Internet. However, when setting up a router yourself, it is still recommended to clarify your type of Internet connection: this information can be found in the contract with the provider or clarified by calling the technical support of your Internet service provider.

• - the choice of port for setting up IPTV STB depends on which port you connected the set-top box to, but by default it is recommended to use the LAN4 connector;
• - enable UPnP – mark the option “Yes” with a marker;
• - get a WAN IP address automatically – select “Yes”;
• - enable PPPoE relaying – it is recommended to set the option “no” from the list.
• - in the username and password fields, enter the data received from the Rostelecom operator for connecting to the Internet.

Setting up an asus rt n12 router for Beeline and MTS

In general, the instructions for setting up an asus rt n12 router for MTS, Beeline and other “mobile” providers are similar to setting up a router for Rostelecom.

Here, in the “WAN” - “Internet Connection” tab, set the following values:

• - WAN connection type - set the L2TP item;

• - enable UPnP - set the marker to “Yes”;
• - obtain a WAN IP address automatically – check “Yes”;
• - connect to the DNS server automatically - select the “Yes” option;
• - L2TP server (VPN) - for beeline, enter this address tp.internet.beeline.ru.

"Username" and "password" in in this case are issued to the subscriber by the Beeline service provider. Enter them. There is no need to change the remaining parameters - feel free to click the “Apply” button.

However, when setting up a router for MTS, there are certain subtleties.

In the WAN connection selection tab, you must set the connection mode to automatic. Login and password must be entered in the appropriate “Settings” tab account and connections" - you receive them directly from the operator.

How to set up wifi on asus rt n12 router?

Setting up WiFi on the asus rt n12 router is carried out in the “ Wireless network", where you need to set the following parameters:

Configuring the asus rt n12 router to watch IPTV consists of the following steps:

• - select the “local network” tab in the menu;
• - further IPTV;
• - enable multicast routing – mark the “Enable” option with a marker;
• - enable IGMP Snooping – set the marker to “Enable”.

Leave the remaining items unchanged and click the “Apply” button to save the new settings.

asus rt - n12 setting up vpn server

Go to the router management menu and follow the following instructions step by step:

Set any IP address in the range from 192.168.10.2 to 192.168.10.254: the asus rt -n12 router simultaneously supports up to 10 clients. In the VPN server tab, you must enter your username and password. Save your changes.
In the network map section you can see the status of your VPN server, its IP address and connection status.

How to reset the settings of the asus rt n12 router?

Resetting user settings to factory settings is quite simple: for this you will need a regular needle or pin. On the back of the router, find the socket labeled “Reset”. Press and hold for 10 seconds. The device has been reset. Release the button.

How to set the password for asus rt n12?

Asus password– forgot your password?

If your ISP provided you with your router, you can try calling them and see if they know your router's username and password, or maybe they can reset it for you.

If you still can't log in, you may have to reset your router to default settings.

It's possible that your router's default password is different from what we've listed here.

Change your router's DNS settings

Some ISPs prefer to abuse DNS system and match unknown names to the servers they manage. This can be done without you knowing what's going on because your router gets its DNS settings from your ISP. For example, if you have one of these ISPs that are hijacking your DNS, and you try to navigate to the Internet at "some-random-site.com" and "some-random-site.com" doesn't exist, you might get a page back from your ISP with local advertising on it.

By changing the DNS setting on your router, you are effectively changing the DNS setting for every computer on your network. This is because when a device is connected to your network, your router automatically pushes its own DNS settings to that device. So you can protect your entire network from ISP hijacking with one parameter.

Changing DNS Settings on Asus

If you followed our registration guide above, you should see this screen.

To change settings domain name systems, click on the selection on the left side of the page labeled " LAN", located under additional settings.

On this new page, click the tab at the top of the page that says DHCP Server.

Set up the DNS partition of your Asus RT-N66U

You are now on a page similar to the one you see above. Scroll down the page until you reach the section with DNS and WINS Server settings .

In the specified field DNS server Enter the primary IP address of the DNS server you selected.

Most routers have at least two spaces for the primary and secondary addresses. ASUS RT-N66U only has space for the main address. Since you rarely need a secondary address, this shouldn't be a problem, but if you find one, you may need a different router.

For children: best apps for children on iOS or Android.

When you're done with the changes you want to make, click the " Apply" at the bottom of the page.

Possible problems when changing DNS settings

Most devices on your network will not start using the new DNS settings until they are rebooted. After your device restarts, you can go to its network settings and make sure it uses the DNS servers you specified.

Asus Port Forwarding Instructions

After you have completed logging in Asus RT-N66U, you got to network map router. Find the link on the left side of the page that says WAN, it is under the heading “ Additional settings». This will open new page up, select the tab at the top labeled Virtual Server / Port Forwarding .

Set up the Port Forwarding section of your Asus

Now to forward the port, make the following changes:

Now you are on correct page. Scroll down until you see port forwarding list. Underneath this service name enter something that reminds you of why you are forwarding these ports, such as the name of the program.

Next to this range ports enters the port number in this field if you are forwarding multiple ports then enter them as a list like 22,23,24, a range like 22-25 or a combination like 22, 23, 25-27.

To the right of this is local IP-the IP address you forward to these ports into this field. If you are forwarding a port to run a program on your computer, you should use that computer's IP address here.

After this there is local port. Enter the same numbers you entered in port range, you can enter ports as a list, a range, or a combination of both.

When you finish all this, click the button Add" right and then " Apply" below. That's it!

If your router is faulty, buy a new one:

Connect to PC or laptop

Most people install a router in their apartment, and only then start thinking about how to configure it over the air. Which is not particularly correct. For convenience, it is easier to set up the router by connecting it to the computer directly, and after setting it up, place it where it is more convenient for you.
To make a connection, first turn on the router to the network, then insert the wire from the provider into a separate socket, the color of which is different from all the others (white, blue or another color, under this socket there should be an inscription in the form of an “e” sign with a rim). Take the wire that comes with the kit - a patch cord, and connect it to one of the 4 “LAN” sockets, connect the other end of this wire to network card. It needs to be inserted where the wire from the provider was connected. This completes the connection of the RT N12 D1 to the computer.

Resetting the RT N12 D1 router settings

Before you start setting up your router, I recommend using . Maybe you didn’t get a new router, or after checking it at the factory, they forgot to return the settings to the standard state. To reset the settings, you need to press the Reset button; for this you will need an object with which you can reach the button, for example, a match or a straightened paper clip. After pressing the button, hold it in this position for 10-12 seconds, or wait until all the lights on the front panel light up at the same time. And after that, wait until the router restarts completely.

Setting up the input on RT N12 D1

After the router connects you need. Login is performed as standard, as on all Asus routers. To get started, run . After this, write 192.168.1.1 in the address bar, login – admin, password – admin, and press Enter.

Once logged in you will see a page quick settings. To better understand the process, it is better to do everything yourself. By clicking on the button, which looks like a “house” and is located in top corner on the right, you will go to home page. For some firmwares, just click the "Next" button.

Setting up an Internet network on Asus RT N12 D1

First, set up your Internet connection. To do this, find an agreement with your provider, which specifies the settings and type of connection. If for some reason you cannot view these settings in the contract, please contact technical support your provider and ask them for these settings. After that, go to the “Internet” menu, located on the right side.

IP address, dynamic. Setting up for Rostelecom, Volya, TDK-Ural, Kyivstar

This type of connection is the simplest. To configure it, just select “Automatic IP” in the WAN connection type field. After this, be sure to put “Yes” in the “enable WAN” and “enable NAT” fields, you can also enable “UPnP” - so that there are no problems when working with file hosting services.

Some providers are bound to a specific MAC address, in which case it is worth specifying it. This address most likely belongs to the computer that was previously connected to the Internet. If you are setting up on the same computer, simply click on the “Clone MAC” button, followed by the “Accept” button.

Setting up a PPPoE connection for Rostelecom, TTK and Dom.ru

To begin, select the WAN connection type - “PPPoE”, also enable WAN, NAT and UPnP by checking the “Yes” field. The main thing is that in the account settings, in the “Username” field, indicate your login, which you looked at in your contract or learned from the support service. And in the “Password” field, in the same way we enter the required value assigned to the login provided by the contract.

Similar to the Dynamic IP settings, some providers bind by “MAC” address. When performing setup on a computer that was previously connected to the Internet, simply use the “Copy MAC” button. If you are using another device, enter this address manually. When you have finished entering all the settings, click the “Apply” button.

Setting up RT N12 D1 with L2TP connection type and Beeline provider

To configure, if your provider is Beeline, you need to select the L2TP connection type. Then enable WAN, NAT and UPnP. The user name, in this situation, is the contract number, this is the same number to which you make Internet payments. Password – identical to the password from personal account. In paragraph " VPN connection» specify – tp.internet.beeline.ru. At the end, all you have to do is click “Apply”.

IPTV, setting up Asus RT N12 D1

IPTV settings in this router are incomplete due to new firmware. You can select the port through which the signal will be received. If your provider requires you to specify a “VLAN ID”, I will disappoint you, because this router does not have it, and therefore it is not suitable for you.
To select a port, go to " Local network" At this point, in the “Select IPTV-STB port” field, you will need to select the port to which you will subsequently connect the iptv set-top box. Finally, click the “Apply” button.

Setting up Wi-Fi Asus RT N12 D1

For Wi-Fi settings on this router model, you need to go to the “Wireless Network” tab. In this tab, select “General” and enter some information there. SSDI is the name of your network, you can enter any name in Latin. “Authentication Method” - selects only WPA2-Personal, “WPA Pre-Shared Key” is , specify whichever you like, but not less than 8 characters and click “Accept”.

When you finish entering any settings, reboot your router. The button for this is located at the very top of the interface. The entire reboot procedure will last about 2-3 minutes. After this, the setup of Asus RT N12 D1 is completely finished.

That's it. I created a small manual for setting up the asus rt n12. Setting it up is not as difficult as it seems, you just need to set aside a few minutes of your personal time. And then, after all the steps taken, you can fully use the purchased router. I hope this information helps you in setting up asus rt n12.

Hello! Let's continue the topic of routers. More precisely, today I will tell you how and why they reset settings to standard values. Our portal will most likely contain instructions for routers from different manufacturers. And I chose to reset the settings on the Asus router.

If you have any questions while reading, or want to add something, be sure to write in the comments!

Why is this needed?

The “Reset settings to factory settings” option is available on all routers, regardless of the brand and model. What is this function for? Here are three main times when it can come in handy:

1. When you set up the Wi-Fi router, you changed the login and password to access the administrative panel. It was necessary to change some parameters, but it turned out that the authorization data was safely forgotten, and the sheet of paper with the notes was lost. That's when resetting to standard settings. But there is one point - be prepared to configure the router again.
2. If while working in the web interface you saved incorrect parameters, RESET will also help here. After restoring factory settings, you can configure the device again.
3. In some cases, a reset helps fix some problems with the router.

Well, the most important thing. How to restore factory settings? There are two options that work for all routers:

• Press the RESET button on the device itself;
• Use the web interface (of course, if you remember your login/password).

Now you can move on to the main question - how to reset the settings Wi-Fi router Asus?

I immediately suggest watching a video on the topic:

Hardware method

The easiest option is to press the button on the back of the device. On the Asus RT N16 model, resetting the settings to factory settings is done by pressing and holding the RESET button on the back of the device for 5-7 minutes.

The method is suitable for most models of routers from this company. On some older devices, the reset button is named RESTORE.

There may also be this option - the button is not labeled. Look for the one that is recessed into the panel. Usually, to press RESET, you need to use a paperclip or a needle.

What to do if the button performs two functions - reset and WPS (designed for simplified connection to Wi-Fi networks)? In this case, hold for at least 10 seconds.

Software method

A more complex option, but you need to know it. I’ll tell you how to perform a factory reset via the admin panel using the Asus RT N12 as an example:

1. Open any browser and enter the router’s IP in the address bar (not the search bar!). For us it is 192.168.1.1. In the authorization menu we write the login/password. If you did not change them to your own, then this means the word admin in both fields.
2. In the “Advanced Settings” section, look for the “Administration” line. At the top, select the “Manage Settings” tab.
3. In the window that opens, find “Factory settings” and press the button opposite “Restore”.

1. Now you need to confirm your intentions. In the confirmation window, click “Ok”.

The router will reboot. The process takes a couple of minutes. Then you can go back to the administrative panel and configure the router.

If the web interface is in English, you can reset the settings on your Asus router like this. We look for the “Administration” item, the “Restore/Save/Upload Setting” tab and click on “Restore”.

Resetting settings to Asus routers RT N10, N14, N18U, AC1200 and other models can be done the same way - either with a button or through the control panel.

We are waiting for questions and comments. Be sure to write if something didn’t work out or if you need help setting up the router after restoring factory settings. Bye everyone!

To find out how to reset factory configurations on routers from Asus, you need to read this article to the end. In fact, this is an incredibly useful thing, so the information posted can be useful to many. In general, resetting settings on an Asus router is almost the same as on other networked PCs. This is done using a button designed for this purpose, located on the case, or by using the control panel, where such a function is built in.

Why is the reset done and what is it all about?

The answer is simple - each gadget has default settings set by the manufacturer. But, having bought it, we still want to configure it the way it is necessary and convenient for us. The parameters for connecting to the provider are set, the Wi-Fi password is set, the network name is changed, etc.

For example, almost a couple of weeks ago we set up the Asus RT-N12+. This practice showed us that there are cases where it is necessary to clear the parameters in order for the device to return to factory settings. An example would be changing your provider if you decide to sell a gadget or something went wrong during setup and you need to return everything to its original state, i.e. factory position. That is why we remove all existing parameters and reconfigure the device again.

Even using the instructions for setting up the necessary configurations, for some models it is more practical to reset them to factory settings. This must be done with the settings that you set earlier, as they can become a source of any problems.

I would like to immediately note that the information in this article is excellent for various devices Asus (RT-N10, RT-N12, RT-N14U, rt-g32, etc.). In general, the principle is the same; differences can only be in the location of the button.

Resetting settings on an Asus router

Attention! When performing a reset operation, it is worth remembering that everything will be deleted from the gadget, so after that you will have to reinstall everything that is important to you. You can configure the router using the instruction manual, which may be located in.

As mentioned above, to reset the settings, you need to use a special button located on the device body. It can be signed as Reset or Restore. By the way, on Asus this button can also perform the WPS function, which is activated during a short press.

Thus, to reset the settings, you you need to press this Reset button for 10 seconds and hold it. After releasing, the gadget will reboot, which will restore the factory settings. You can see what this button looks like using the example of Asus RT-N12+:

Please note that on the RT-N18U model this button is not marked at all.

This is how the button on the old Asus RT-N13U is presented:

There probably won’t be any questions with this picture, everything is very clear here: press the button and hold it for 10 seconds. and, voila, the tinctures are ready.

How do I restore factory settings from the control panel via 192.168.1.1?

In addition, there is an excellent option for saving settings, which, if necessary, can be restored from a file. But all the intricacies of these events will be described in another article. And now, I hope this information It will help you reset your Asus device without any problems.