192.168 0.1 admin promsvyaz login. Step-by-step instructions for connecting and setting up a TP-Link router. admin admin - login for D-Link, Tenda and TP-Link

All modern wireless routers TP-Link have a single appearance web configuration interface. The only thing that may differ is different versions firmware of the same model is the language: most often English. To get a Russian interface on http://192.168.0.1 tp-link, you must flash it with firmware that supports the Russian language.

To access the router settings, in some cases you may need to configure a static IP on your computer’s network card. You can also use the hostname tplinklogin.net in the browser address bar instead http://192.168.0.1 Login to access the router settings - admin, default password is used admin.

To configure a connection to the provider’s network on your device, you need to go to the section Network -> WAN (Network -> WAN).

How to set up PPPoE for Dom.ru, TTK and Rostelecom

The PPPoE protocol is used by most providers, both in Russia and in Ukraine, Belarus, and Kazakhstan. The most striking examples include Rostelecom, Dom.ru, TTK, Aist, Tattelecom, Bashinformsvyaz (Bashtel).

We choose the WAN connection type PPPoE/PPPoE Russia:

In the field Username you need to enter your login to connect to the Internet, and in the fields Password And Confirm password- correspondingly the password for access. This data was given to you by the provider’s employees when concluding the contract. Be sure to check the box Connect automatically- this is necessary so that your TP-Link router automatically connects to the Internet every time. Save the settings.

How to configure Dynamic IP for TTK Ural, Rostelecom Udmurtia, Chuvashia (Mac Based VLAN)

Configuring a TP-Link router for an IPoE connection via Dynamic IP is as easy as pie, since this is the connection option that is initially configured on the device. That is, just reset the router’s settings with the Reset button and you will receive a router already configured to connect to the provider’s network.

If you configure it through the web interface of the router, which many for some reason call “Personal Account”, then you just need to assign a value to the “WAN connection type” parameter Dynamic IP address and press the button Save.

Setting up VPN L2TP for Beeline

The Internet provider Beeline has the most exotic connection type - Dynamic IP+L2TP. When choosing a connection type, you must select the value L2TP/L2TP Russia:

In the Username and Password fields you must enter data for authentication on the Beeline server. As a rule, the login is a personal account, and the password was given to you upon connection. Below we check the Dynamic IP checkbox. In the field Server name you need to enter the address: tp.internet.beeline.ru. All that remains is to check the box Connect automatically and save the configuration settings.

Setting up Wi-Fi on TP-Link routers

To set up a Wi-Fi network on TP-Link routers, you must select the item in the menu Wireless mode>>> Wireless settings:

In the Name field wireless network You can change the name of the Wi-Fi network of your TP-Link router. If you don’t care what it’s called, you can leave the one that was originally installed.
On the list Region select Russia. The number of the channel used and its width are left as follows Auto. It is better to leave the operating mode mixed too - 11bgn.
Save the settings and go to the section Wireless Security:

Security protocol type select WPA/WPA2-Personal

How to set up IPTV on TP-Link for Rostelecom, Dom.ru, Beeline

To connect digital television When using an STB set-top box with most providers, you just need to select one of the LAN ports and switch it to bridge mode. This is done in the section Net >>> IPTV:

This option usually works without problems with TV from Beeline, Dom.ru, TTK and most branches of PJSC Rostelecom. If for work interactive television you need to register the VLAN ID, in the "Mode" list you need to select the option 802.1Q Tag Vlan:

VLAN TAG for the Internet should be left set to “Disable”. And enter the VID for IPTV in the appropriate field. If the TP-Link router complains about the need to specify the VID value for the Internet, then you will need to use a trick and enter the value in the “VLAN ID for IP telephony” field. All that remains is to set the desired operating mode on the LAN port into which the TV set-top box is connected and click on the “Save” button.

IP address 192.168.0.1 and page http://192.168.0.1 - used to access the settings of routers from the following manufacturers: Dlink, TPlink, Netgear, Tenda, etc. To change settings or initially configure the Internet/Wi-Fi connection, to http://192.168.0.1 and log in using admin admin (username and password). How to do this?

Instructions for logging in to 192.168.0.1

1. Specify the address and login parameters in the settings. They are indicated on a sticker on the bottom of the router case.
2. Open your browser. Enter http://192.168.0.1 in the search bar
3. If a window appears, enter admin/admin or the login and password indicated on the sticker

If the settings login window does not appear, but instead you see the error “Page not found”, “Page not available”, “Unable to access the site”, “Timed out waiting for response from site 192.168.0.1” - it means something wrong with the settings.

Frequent problems with logging into http://192.168.0.1 and their solutions

If the router is new, there is no doubt about it. If you have previously used it, it is advisable to reset its settings to factory settings. To do this, there is a Reset button on the back of the device. After the reset, move on to the next point.

To log in to 192.168.0.1 admin admin, you need to change your network connection settings.

To do this:

Options for login IP addresses for different manufacturers and models of routers:

We will tell you about common problems that most users encounter when setting up routers. One of these problems is the problem with accessing the router’s web interface.

Quite a lot of people are facing this problem when you enter IP 192.168 0.1 or 192.168 1.1 and the router settings page does not open or the error “Page is not available” appears. Therefore, we will try to understand this situation. This will be a general article and will be suitable for all devices.

What should I do if I can’t enter the settings for IP 192.168 0.1 or 192.168 1.1?

You have connected everything, type the IP address of the router in the search bar of your browser and it gives you the error " Page not available", "The page cannot be displayed", "Page not found", V different browsers This error appears in different ways, but the essence is the same. This error may appear due to different problems, For example:

1. There is no connection to the router (bad or damaged cable, drivers are not installed on network card-Wi-Fi adapter or no connection with Internet Wi-Fi or incorrect connection).
2. Incorrect connection (Automatic IP acquisition is not set).
3. An attempt to access the web interface using the wrong IP address of the router.
4. The address 192.168 0.1 or 192.168 1.1 may not open due to the fact that the IP address of the router has been changed.

Before performing any manipulations, we recommend that you take simple steps:

1. Try going to another browser and entering the router's IP address into it.
2. Make sure the power is plugged in.
3. Try restarting your router or your computer.
4. Try setting up from another device (Laptop, tablet or smartphone).
5. You can also disable your antivirus, it may help.

Determining the correct IP address of the router

Checking the connection to the router

If you see a different connection status, for example (a red cross), even though you want to go to the settings panel via a network cable, then you do not have network connection With Wi-Fi router ohm

If you did everything correctly and there is still no connection, then your wire may be damaged, then try replacing it with a normal wire and try again. Also, the lack of a network may be due to the fact that you did not install drivers on the network card or it may be damaged. Try logging in from a laptop, tablet or smartphone.

When connected via Wi-Fi, you should see signal bars in the lower corner of your desktop. If there is a yellow sign next to it, then you have connection problems.

Checking the settings for obtaining an IP address

On the PC in the network settings it is set static IP address , most likely your PC cannot establish a connection with the router because of this. Therefore, you need to check the parameter automatic IP acquisition for the connection through which you are going to connect.

Attention!!!: if you cannot access the Web interface when connected via cable, check in the control panel of your PC " Connection via local network ", and if via Wi-Fi, then " Wireless network connection".

Now we will show you in detail how to do this:
Click on the icon with the right mouse in the lower right corner of the desktop, you will see a window click Network and Sharing Center.
In the window that opens, click on the left Changing adapter settings.
Select the connection with which you are connected and right-click - select Properties(we show using Wi-Fi as an example).
Select the line Internet Protocol Version 4 (TCP/IPv4) and press Properties. Make sure that automatic retrieval of IP and DNS is checked. If not, check the box and click apply. After this, restart your computer.

When trying to enter the settings, it detects an incorrect name or password

You are trying to enter the setup menu of a router, modem or optical ONT terminal via http://192.168.1.1 and “ personal account» device does not open for you. What to do? Call a specialist and pay money? Take your time and don't get discouraged. Let's try to figure out the problem together and decide how to log into the router?!

I think it's useful to know a little theory first:
192.168.1.1 - this is the IP address (IP) network device. By default, the network is usually registered on routers: 192.168.1.0/24. In other words, the local network on the router is configured with the first (lowest) address in the subnet - 1, and clients connected via the local network will use addresses with 2 By 254 . In general, this is a generally accepted rule and is configured this way for the vast majority of network devices - Zyxel Keenetic, Lincsys, Cisco, TP-Link, Upvel, Sagemcom, Asus. There are, of course, exceptions. For example, at D-Link routers and Netgear uses a different subnet by default - 192.168.0.0/24 and accordingly the IP will be - . But, whatever one may say, the numbers are different, but the meaning is the same - that IP 192.168.1.1, that 192.168.0.1 is the address of a network device on the network. In our case -

How to log into the router

Now let's move on to practice. To go into the settings of a WiFi router or ADSL modem, you must enter the address in the browser: http://192.168.1.1. In this case, you do not need to type the protocol at the beginning - http:// or www - the browser itself will automatically enter the required one.

If you have access to the settings, you will see an authorization form on the device, where you will need to enter your login and password (usually to log into the router via 192.168.1.1 you use: admin / admin):

This means that the local network is configured, the router is accessible and there are no problems with accessing its settings. We will consider the worst case scenario - the browser displays the error “Page is unavailable” or “Unable to access the site”:

Web interface accessibility issues can vary. Let's look at the most common of them:

Instructions on how to log in to 192.168.1.1.

Step 1. Check the activity of the network connection.

Very often, the reason for the router’s inaccessibility is the network cable disconnected from it.

In this case, it is not necessary that someone pulled out the cable intentionally - the connector can simply move a millimeter away from the network card connector and nothing will work. Be sure to check the integrity of the cable - it may be pinched somewhere or damaged by something. Please also note that the LAN cable must be connected to the LAN port of the device and not to the WAN port.

Otherwise, you will not be able to access 192.168.1.1 through the WAN port. This port is used to connect the provider cable. And that's all!

Step 2: Check the network indicators.

Here I mean the physical connection indicators both on the computer’s network card and on the router itself. What are they? Typically this is a green LED. If the network is active, the indicator lights up or blinks quickly. We take your device in our hands and look at the front panel. When turned on, the Power indicator must be lit - it means that the device is turned on. Then we look at the LAN port indicators - they are usually marked either simply with numbers - 1, 2, 3, 4.

When plugging the patch cord into the LAN port— the indicator with the corresponding port number should light up. If it does not light up, try disconnecting the network patch cord and plugging it into the adjacent connector. If the indicator does not light up there either, try everything one by one. Didn't help? Then you have The router is faulty - take it to service.

Step 3: Check your network settings.

At this stage we need to check the settings network adapter- what IP is registered. To get into the network card settings on the operating system Windows system XP you need to click the Start button, select the Network Connections section. In Windows 7 and Windows 8, press the key combination Win+R. The Launch Program window will open. Here you need to type the phrase - control panel.

The Panel will open Windows management, where you need to find the “Network and Internet” section.

Click on it with the left mouse button. The following window will open:

Now, to open the router’s personal account via 192.168.1.1, click on the “Network and Sharing Center” link:

Select the menu item “ Properties" . The Local Area Connections properties window will open:

Select “Internet Protocol Version 4 (TCP/IPv4)” and double-click on it with the left mouse button. In most cases, IP settings are set to automatic mode:

This is how the system was initially configured. This is done in order to facilitate the connection of the computer to the network. Thanks to this, if there is a DHCP server on the network, then Windows will receive an IP address, mask, gateway address and DNS from it.
But what if there is no DHCP server on the network, or it is disabled in the configuration? In this case, logging in via 192.168.1.1 to your personal account in automatic settings will not be available, since the IP will be picked up from a special Microsoft subnet - 169.x.x.x. It goes without saying that with such an address you will not have access to the WiFi router address. Therefore, to enter its configurator, you need to register the IP manually - check the “Use the following IP address” checkbox and enter the addresses as in the picture:

That is, the following should be written:
IP address - 192.168.1.2
Mask - 255.255.255.0
Gateway - 192.168.1.1
Preferred DNS server — 192.168.1.1
Alternative DNS server - 8.8.8.8
Registered, click the “OK” button for the changes to take effect. We launch the browser again and try to go into the router settings at 192.168.1.1. The router’s personal account is still inaccessible?! Well, let's move on.

Step 4. Check the Web browser.

In the Control Panel, select the “Network and Internet” section :

Now you need to select “Internet Options” and open the “Connections” tab. Click the “Network Settings” button:

No Proxy servers should be registered.

Keep in mind that a web browser is also a program and may not work entirely correctly. Therefore, be sure to install another browser - Firefox, Opera or Chrome - and try to log into the router via 192.168.1.1 (Zyxel Keenetic, TP-Link, ASUS, etc.).

Step 5. The node can be blocked by the Security System.

It may happen that your modem or router becomes unavailable locally due to incorrect configuration of the Windows Firewall or another firewall you have installed. To eliminate this we do this:
We completely disable (by stopping the service) the security system you have installed - antivirus, firewall, etc.
Also, to exclude all options, we try to disable the standard Windows Firewall. It can also block IP 192.168.1.1 or an entire subnet. Go to the Control Panel, select the “Windows Firewall” section and completely deactivate the packet filter by clicking on the “Turn off” value.

On Windows 7 and Windows 10 Toolbars We look for the “Security System” -> “Windows Firewall” section and select the “Turn Windows Firewall on or off” menu item.

We disable it completely for private and public networks.

Again we check access via 192.168.1.1 to the personal account of the modem or router.

If none of the above helped you, then only the following scenarios remain:

1 option- The IP address on the router has been changed. That is, it is not 192.168.1.1 that is used, but another IP - 192.168.0.1, 10.90.90.90, etc. In this case, all that remains is to reset the device configuration parameters using the “Reset” button on the back panel of the device and configure it again.

Option 2- viruses and malware. Nowadays there are a lot of different infections circulating on the Internet, including viruses for routers that change some of their settings, after which logging into the device’s web interface also becomes quite problematic. Start by checking your computer or laptop for viruses.

Option 3— check if you can access 192.168.1.1 from a phone or tablet by connecting to WiFi networks. The password for connecting to a wireless network is often written on a sticker glued to the bottom of the device. If not, then, as an option, you can try using the WPS function. In this case, the PIN code will also be written on the sticker.

Option 4- Hardware failure of your modem or router. In this case, the only way out is to take it to a service center.

Video tutorial:

In this case, only 2 options are possible:
1 - Reset the settings with the “Reset” button, as described above, after which access to the modem settings should be possible without problems. But please note that after resetting the settings, the router will be pristine and will have to be completely configured from scratch.
2 - Look for the person who originally set up your device and ask for the password. If this was done by a master installer from the provider, then perhaps he installs the same thing on all devices. If the parameter settings were made by someone else, then he is unlikely to remember and will still have to use “Reset”.

The most popular devices using the address 192.168.1.1:

Zyxel equipment.

ADSL modems:

OMNI ADSL LAN EE, OMNI ADSL LAN EE, OMNI ADSL WLAN EE, P-660H EE, P-660HT EE, P-660HTW EE, P-660HW EE, P-660R EE, P-660RT EE, P-660RU EE, P-662H EE, P-662HW EE, P-741, P-791R v2, P-792H EE, P-792H v2, P-793H, P-793H v2, P-794M, P-841, P-844 EE , P-870H-51A V2, P-870HW-51, P-870HW-51A V2,
P-870MH-C1, P-871 EE, P-871M, P-872H, P-872HA, P660HN EE, P660HN Lite EE, P660HT2 EE, P660HT3 EE, P660HTN EE, P660HTW2 EE, P660RT2 EE, P660RT3 EE, P660RU2 EE , P660RU3EE

WiFi routers:

BG318S EE, NBG334W EE, NBG460N EE, P-330W EE, P-334 EE.Keenetic, Keenetic 4G, Keenetic 4G II, Keenetic Giga, Keenetic Giga II, Keenetic II, Keenetic Lite, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Ultra.Keenetic 4G II, Keenetic Giga II, Keenetic II, Keenetic Lite II, Keenetic Omni, Keenetic Start, Keenetic Viva, Keenetic Extra,Keenetic Extra 2, Keenetic DSL.

(Second generation kineticists have the hostname my.keenetic.net)

D-Link equipment:

DSL-2640U B1A T3A, DSL-2640U BRU C, DSL-2640U BRU C2, DSL-2640U BRU CB, DSL-2640U BRU D, DSL-2640U RA U1A, DSL-2740U BRU C2, DSL-2750U B1A T2A

Tp-Link equipment

The configuration interface for devices from this manufacturer looks like this:

ADSL modems:

TD-W8901N, TD-W8950ND, TD-W8951NB, TD-W8951ND, TD-W8960N, TD-W8961NB, TD-W8961ND, TD-W8968, TD-W8970

Wi-Fi routers:

TL-WA701ND, TL-WA730RE, TL-WA750RE, TL-WN7200ND, TL-WN721N, TL-WN721NC, TL-WN722N, TL-WN722NC, TL-WN723N, TL-WN725N, TL-WN727N, TL-WN751N, TL- WN751ND, TL-WN781ND, TL-WR702N, TL-WR720N, TL-WR740N, TL-WR741ND, TL-WR743ND, TL-WA830RE, TL-WA850RE, TL-WA901ND, TL-WN8200ND, TL-WN821N, TL-WN821NC, TL-WN822N, TL-WN823N, TL-WN851ND, TL-WN881ND, TL-WN951N, TL-WR1042ND, TL-WR1043ND, TL-WR841HP, TL-WR841N, TL-WR841ND, TL-WR842ND, TL-WR940N, TL- WR941ND, TL-WA5210G, TL-WA7510N, TL-WR743ND, TL-WR843ND, TL-WA5210G, TL-WN310G, Acher C2, Acher C7, Acher C9, Acher C20, Acher C50.

Also used domain names: tplinklogin.net, tplinkwifi.net, tplinkmodem.net.

Asus equipment

Web interface of older version routers:

ADSL modems:

D6300, D6200, DGND3700, DGND3300v2, JDGN1000

Netgear routers:

R6300, 6200, WNDR4700, WNDR4500, WNDR4500, WNDR4300, WNDR4000, WNDR3800, WNDRMACv2, WNR3500L, WNR3500Lv2, JNR321, WNR2200, JWNR2000, JWNR2000v2, 2, JNR1010, WNR612v3, WNR612v2.

A router is a convenient solution for building a local and wireless network, allowing you to simultaneously access the Internet from several devices. However, to configure the router, you first need to install it correctly and go to the web interface, where the basic parameters of the equipment are indicated.

Connecting equipment

Before you go into the router settings, you need to install the equipment correctly. You will need:

• Router.
• Network cable.
• Network card on the computer.

Any user can handle installing a router - the main thing is to carefully inspect the ports and figure out what they are needed for. Explanatory inscriptions and different colors of connectors will help with this.

1. The cable that the provider brought into the room is inserted into the WAN/Line/Internet port (usually it blue).
2. A network cable, which comes with the router, is installed in one of the LAN ports (mostly yellow). The second end of the patch cord is connected to network card computer.
3. The power cable is installed in the appropriate connector.

Once all the wires are in place, press the power button. If everything is done correctly, several indicators on the router will light up: power, network connection and connection to the computer.

Setting up a router in the system

To open the router interface, you need to configure network connection. Usually the necessary parameters are set automatically, but it would be a good idea to check that they are correct.

These are standard settings that allow the router, using a DHCP server, to independently give an address to the connected device (computer in in this case).

Login to the interface

After connecting and configuring the equipment, you can proceed to resolving the issue of how to log into the router. On almost all routers, the interface address, login and password are indicated on a label located on the bottom of the device.

If there is no sticker, then you can see the address for displaying the router web interface in the browser using software:

1. Open Network and Sharing Center.
2. Proceed to change adapter settings.
3. Double-click the Local Area Connection icon.
4. Click Details and look at the Default Gateway value.

If you changed your login and password yourself, but cannot remember the new values, then use the Reset button on the router to reset its settings to factory settings. After resetting the settings, the identification data will become standard - admin/admin.

It is not necessary to look at the router address. Most manufacturers use the same address, so the order in which the routers interface starts is different models not much different.

For example, TP-Link and D-Link routers use the IP address 192.168.0.1. After entering this value, an authorization window appears in the address bar of the browser; you need to enter your login and password in it. For some models D-Link routers Dir only needs to indicate the login; the password line can be left empty.

U Asus routers and Netgear's default address is 192.168.1.1. The login and password are also usually standard – admin/admin. But there may be options: for example, for the NETGEAR WGR614 router the login will be “admin” and the password will be “password”.

For Huawei routers, the login information is slightly different from the usual values. The address to enter the interface is 192.168.100.1. The login and password are also not quite standard - root and admin, respectively. Some models have even more complex pairs for authorization.

Zyxel Keenetic routers have an easy-to-remember address my.keenetic.net. As an alternative, the standard address 192.168.1.1 is used. The login will be the word “admin”, and the password will be standard settings – 1234.

It seems like you can get confused, but in reality everything is simple. In 90% of cases the address will be 192.168.0.1. or 192.168.1.1, and the pair for authorization is admin/admin. If these values ​​do not allow you to open the web interface, then read the instructions carefully - the address, login and password are always indicated there.

Possible login errors

If you go into the router settings using automatic settings If it doesn't work, try setting the login parameters manually using the router's IP address.

Knowing the router's IP address, you can manually specify the TCP/IPv4 protocol parameters:

To understand what values ​​need to be specified, let’s take the router’s IP address - for example, 192.168.0.1. Based on this address, fill in the lines as follows:

• IP address – 192.168.0.2 (last digit must be in the range from 2 to 254).
• Subnet mask – 255.255.255.0 (always remains the same).
• The main gateway is 192.168.0.1 (the router address is indicated here).
• The preferred DNS is 192.168.0.1 (the router address is also written down).

With these settings, the problem of launching the router's web interface through a browser should be resolved. Then all you have to do is set up the Internet and create wireless connection so that the Wi-Fi router begins to fulfill its functions of providing constant access to the network from different devices.